part number list-shanghai junxun20241014(2)
Time：
2025-04-30
Part NumberDescriptionB32040-37TOOLB32043-1HANDING TOOL MLG DOORB32044-12PULLER
| Part Number | Description |
| B32040-37 | TOOL |
| B32043-1 | HANDING TOOL MLG DOOR |
| B32044-12 | PULLER EQPT - STRUCTURAL FUSE PIN |
| B32045-1 | TOOL |
| B32046-1 | PIN ALIGNMENT |
| B32049-1 | TOOL |
| B32049-6 | TOOL |
| B32051-1 | SPRING EXTENDER-LOCK RELEASE ACTUATOR,NG & MG DOOR |
| B32058-27 | ALIGNMENT EQPT |
| B32059-15 | TOOL |
| B32060-1 | TOOL |
| B32068-33 | TOOL |
| B32070-1 | INSTALLATION KIT – BUSHINGS, NOSE LANDING GEAR (NLG) |
| B36001-1 | TOOL |
| B36003-1 | LEVER EQUIPMENT - INS/REM PNEUMATIC DUCT |
| B49001-1 | FRAME ASSY |
| B49001-35 | INSTL/REMOVAL EQPT-APU |
| B49002-64 | STAND ASSY |
| B49003-10 | TOOL |
| B49004-1 | TOOL |
| B49004-7 | TOOL |
| B52001-1 | SLING |
| B52001-2 | BEAM ASSY |
| B52001-7 | CABLE ASSY |
| B52003-15 | Safety barrier-Safety barrier-passenger door |
| B52004-1 | INSTALLATION TOOL – DOOR SEAL |
| B52006-1 | Safety barrier-elec/elex access door |
| B52009-10 | SAFETY PIN ASSY |
| B52013-6 | TOOL |
| B52015-9 | Safety barrier-No.3 emergency exit door |
| B52016-1 | SLING-MAIN CARGO DOOR |
| B52020-3 | TOOL |
| B52021-1 | Wrench-thrust collar |
| B52022-21 | TOOL |
| B54001-30 | TR PUMP ASSY |
| B54001-31 | PUMP ASSY |
| B54001-53 | HYDRAULIC PUMP – ENGINE C-DUCT |
| B54003-8 | TOOL |
| B54006-12 | ALIGN.FIXT. |
| B54012-45 | TOOL |
| B54013-38 | SLING EQPT - DIAGONAL BRACE UNLOAD, PW2000 SERIES ENGINE |
| B54017-22 | SLING EQPT - FUSE PIN, REMOVAL/INSTALLATION - RB211-535 ENGINE |
| B54018-42 | TOOL |
| B55002-15 | SUPPORT EQUIP. |
| B55003-24 | 1/2INCH SQUARE DRIVE RETAINING NUT WRENCH |
| B55003-27 | TOOL |
| B57003-11 | REACTION FITTING |
| B57003-33 | ADAPTER EQPT - TRUNNION BEARING AND MOUNT, MLG INSTL AND REMOVAL |
| B57003-9 | FITTING |
| B71001-130 | TROLLEY |
| B71001-371 | ENGINE HANDLING EQPT |
| B71001-372 | BOOTSTRAP EQPT |
| B71005-10 | PIN&STREAMER ASSY |
| B71005-11 | WRENCH ASSY |
| B71005-28 | Adapter |
| B71005-49 | TOOL SET |
| B71005-51 | TOOL SET |
| B71005-52 | TOOL SET |
| B71005-53 | TOOL SET |
| B71006-79 | Hold open equip-‘C’ duct RB211-535 engine |
| B71007-127 | Cradle-RB211-535 engine |
| B71007-97 | Aft attach ftg assy |
| B71009-9 | LOCK ASSY |
| B71013-1 | Sling-fan cowl,RB211-535 engine |
| B71014-130 | HANDLING FRAME EQUIP |
| B71014-131 | HANDLING FRAME EQUIP |
| B71014-132 | HANDLIN FRAME EQUIP |
| B71014-133 | HANDLIN FRAME EQUIP |
| B71014-3 | HANDLING FRAME EQUIP |
| B71014-5 | FRAME ASSY-C/DUCT |
| B71014-98 | HANDLIN FRAME EQUIP |
| B71016-1 | Hoist/transporter |
| B71020-39 | TOOL |
| B71020-74 | TOOL |
| B71022-172 | TOOL |
| B71022-176 | TOOL |
| B71022-177 | OUTBOARD HQIST ASSEMBLY |
| B71022-179 | TOOL |
| B71023-88 | SLING |
| B71024-18 | 13/16'WRENCH ASSY |
| B71024-26 | 15/16'WRENCH ASSY |
| B71024-36 | TOOL |
| B71024-39 | STRAIGHT EXTENSION ADAPTER |
| B71024-40 | BENT EXTENSION ADAPTER |
| B71025-9 | TOOL |
| B71028-1 | CRADLE ASSY |
| B71029-1 | TOOL |
| B71031-1 | TOOL |
| B71033-21 | CRADLE ASSY |
| B71033-25 | GUARD |
| B71036-1 | TOOL |
| B71040-24 | LIFTING STRAP ASSY |
| B71040-25 | LIFTING STRAP ASSY |
| B71040-28 | TOOL |
| B71040-36 | INLET SLING EQPT |
| B71040-37 | INLET SLING EQPT |
| B71040-38 | INLET SLING EQPT |
| B71040-39 | INLET SLING EQPT |
| B71040-40 | CHAIN HOIST |
| B71040-66 | SLING EQPT-INLET COWL |
| B71042-154 | HANDLING FRAME EQPT |
| B71042-220 | ADAPTER FTG ASSY |
| B71042-229 | E4 POST ATCH ASSY |
| B71042-230 | FWD POST ATCH ASSY |
| B71044-10 | ADAPTER EQPT |
| B71044-28 | ADAPTER EQPT |
| B71044-30 | TORQUE ADAPTER |
| B71046-1 | SLING ASSY |
| B76003-1 | RIGGING EQUIPMENT-ENGINE CONTROL SYSTEM |
| B78001-1 | LOCK ASSY |
| B78001-14 | LOCK ASSY,T/R |
| B78001-2 | DISPATCH KIT |
| B78001-24 | LOCK ASSY |
| B78001-28 | LOCK PIN |
| B78001-31 | CABLE ASSY |
| B78001-43 | LOCK EQPT |
| B78001-8 | LOCK ASSY |
| B78002-36 | SET |
| B78004-1 | TOOL |
| B78006-1 | TOOL |
| B78006-7 | RIGGING BAR – THRUST REVERSER POSITION FEEDBACK LINEAR VARIABLE DISPLACEMENT TRANSDUCER (LVDT) |
| B78008-12 | WRENCH ASSY |
| B78008-17 | SPANNER WRENCH |
| B78008-19 | WRENCH SET |
| B78008-21 | ADAPTER ASSY |
| B78008-5 | WRENCH |
| B78008-6 | WRENCH |
| B78008-7 | WRENCH |
| B78009-26 | LOCK EQUIPMENT – THRUST REVERSER MAINTENANCE |
| B78010-28 | STAND – FUNCTIONAL TEST EQUIPMENT, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR |
| B78011-25 | TORQUE FIXTURE – LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR ASSEMBLY |
| B78013-5 | TOOL |
| B78013-8 | TOOL |
| B78014-37 | TEST FIXTURE – ROD END AND STROKE STOP, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR |
| B78015-14 | TOOL |
| B78015-17 | OVERHAUL SET |
| B78015-18 | DRILL JIG ASSY |
| B78015-23 | OVERHAUL SET |
| B78015-39 | OVERHAUL SET – THRUST REVERSER LOCKING ACTUATOR ASSEMBLY |
| B78016-1 | OVERHAUL SET – THRUST REVERSER LOCKING AND NON-LOCKING ACTUATOR ASSEMBLY |
| B78016-5 | TOOL |
| B78016-6 | TOOL |
| B78016-8 | TOOL |
| B78016-9 | TOOL |
| B78017-1 | INSTALLATION EQUIPMENT – BEARING – LEAD SCREW, THRUST REVERSER NON-LOCKING ACTUATOR ASSEMBLY |
| B78019-1 | TOOL |
| BACP20AU6D | PLUG |
| BC300P | TOOL |
| BC400P | TOOL |
| BC500P | TOOL |
| BLS34529 | ASSEMBLY BULLET |
| C07002-1 | FITTING,JACKING |
| C07002-2 | FITTING ASSY |
| C07004-1 | JACKING PAD |
| C07004-2 | PAD ASSY |
| C07005-1 | FITTING – AIRPLANE TIEDOWN |
| C07007-1 | JACK FITTING |
| C07007-11 | JACKING ADAPTOR |
| C07007-12 | ADAPTER ASSY |
| C07007-14 | BOLT |
| C07007-19 | JACKING ADAPTOR |
| C07007-21 | Bolt |
| C07008-28 | Restraint Equipment - Inboard and Outboard Trailing Edge Flap Tracks ***Recovery*** |
| C07012-1 | SLING EQUIPMENT – AIRCRAFT RECOVERY |
| C07013-83 | SUPPORT - TAIL, AFT FUSELAGE |
| C09002 | DATA SHEET-737 TOWBAR DESIGN |
| C10002-9 | MOORING EQPT-NLG/737NG |
| C10003 | EXHAUST PLUGS – AUXILIARY POWER UNIT |
| C10004-1 | PROTECTIVE COVER – VANE SENSOR, ANGLE-OF-ATTACK |
| C10004-2 | COVER ASSY |
| C10005-1 | PROTECTIVE COVER EQPT - ENGINE INLET ，CFM LEAP - 1 B |
| C10005-23 | TOOL |
| C10006-1 | PLUG EQPT - ENGINE EXHAUST ，CFM LEAP - 1 B |
| C10007-1 | PLUG EQPT - FAN REVERSER |
| C10008-1 | MOORING EQPT - NLG |
| C10008-29 | MOORING EQUIPMENT – NOSE LANDING GEAR |
| C10011-1 | MOORING EQUIPMENT - UNIVERSAL KIT |
| C10011-34 | B747 Anti-typhoon mooring rope |
| C12001-35 | GUARD – INLET, ENGINE RUN-UP |
| C12001-38 | GUARD – INLET, ENGINE RUN-UP |
| C12002-7 | DRAIN HOSE – SURGE TANK SUMP |
| C12003-1 | ADAPTER NOZZLE – RAM AIR INLET MODULATION SHAFT LUBRICATION |
| C12004-6 | SPRING – BALLSCREW LUBRICATION ATTACHMENT |
| C12005-5 | OIL GUN – TRAILING EDGE FLAP ACTUATOR, BALL SCREW, HAND OPERATED |
| C12006-1 | LOCK EQUIPMENT – AILERON FULL-UP LUBRICATION |
| C12006-14 | LOCK EQUIPMENT - AILERON FULL-UP LUBRICATION |
| C1-21870 | POSITIONING ADAPTER |
| C1-21872 | POSITIONING ADAPTER |
| C20002-167 | TOOL |
| C20002-267 | BOOM HOIST-GROUND BASED RMVL |
| C20003-1 | EXTRACTOR - STUCK SCREW |
| C21002-20 | REVERSE FLUSHER EQPT |
| C21002-24 | REVERSE FLUSHER EQPT |
| C21003-133 | BACKFLUSH EQPT - AC |
| C21003-134 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-135 | HOSE EQUIPMENT |
| C21003-136 | Backflush Unit Assy |
| C21003-137 | Backflush Unit Assy |
| C21003-139 | TOOL |
| C21003-155 | BACKFLUSH EQPT-A/C |
| PACK HEAT EXCHANGER | |
| C21003-156 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-160 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-161 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-166 | TOOL |
| C21003-70 | BACKFLUSH EQPT |
| C21003-71 | BACKFLUSH EQPT |
| C21003-72 | BACKFLUSH EQPT |
| C21003-74 | CONTROL ASSY |
| C21003-79 | TOOL |
| C21003-80 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-81 | BACKFLUSH EQUIPMENT – AIR CONDITIONING PACK HEAT EXCHANGER |
| C21003-87 | Plug Assy |
| C21005-1 | HOIST ADAPTER |
| c21005-62 | HOIST ADAPTER |
| C21005-70 | HOIST ADAPTER |
| C21006-1 | DEACTIVATION TOOL – CHECK VALVE |
| C21006-7 | DEACTIVATION TOOL – CHECK VALVE |
| C21007-74 | DIAGNOSTIC EQUIPMENT – AIR CONDITIONING SYSTEM, MIXED MANIFOLD |
| C21008-1 | EXTENSION CABLE – OUTFLOW VALVE INSTALLATION, AFT FUSELAGE |
| C21009-1 | DISPATCH LINK – SRADA STOWAGE |
| C21010-1 | CLEANING WAND EQPT -HEAT EXCHANGER |
| C21011-1 | ADAPTER – HOSE, EXHAUST |
| C21012-1 | RIGGING CLIP - SRADA EXIT LOUVERS |
| C21888-0-1 | PIN-GROUND SAFETY LOCK |
| C21888-0-2 | PIN-GROUND SAFETY |
| C21949010-1 | R I FRAME |
| C22005-22 | BREAKOUT BOX, MULTIPURPOSE, 100/124 PIN |
| C2-21883 | STRETCHING FIXTURE |
| C22646 | TOOL |
| C22783 | PIN SAFETY LOCK GROUND MLG |
| C23157100-1 | LOCK PIN,SAFETY,GROUND,FOR NOSE LANDING |
| C24002-31 | JACK ADAPTER-VSCF |
| C24002-39 | JACK ADAPTER-VSCF |
| C24002-40 | JACK ADAPTER-IDG |
| C24002-41 | JACK ADAPTER-IDG |
| C24002-45 | JACK ADAPTER-IDG |
| C24002-77 | Jack adapter-vscf&idg |
| C24002-78 | Jack adapter-vscf&idg |
| C24002-80 | JACK ADAPTER ASSY |
| C24003-1 | TRAY ASSY -BATTERY,RMVL & INSTL/737NG |
| C24003-9 | EQUIPMENT |
| C24004-1 | POWER DISTRIBUTION PANEL (PDP)- REMOVAL AND INSTALLATION EQUIPMENT |
| C24004-43 | POWER DISTRIBUTION PANEL (PDP)- REMOVAL AND INSTALLATION EQUIPMENT |
| C25001-1 | WRENCH – ANTI-RATTLE NUT |
| C25002-1 | REMOVAL/INSTALLATION TOOL |
| C25005-1 | PORTABLE CART - GALLEY ASSY |
| C26002-21 | TOOL |
| C26003-1 | NUT DRIVER – LIGHT BASE |
| C26004-101 | Test Equipment - Engine Fire Extinguishing System |
| C26004-32 | TEST EQUIPMENT |
| C26004-33 | TEST EQUIPMENT |
| C26004-73 | TEST EQUIPMENT – ENGINE FIRE EXTINGUISHING SYSTEM |
| C26004-8 | TEST EQUIPMENT |
| C26004-83 | TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM |
| C26004-84 | TEST EQPT - ENGINE FIRE |
| EXTINGUISHING SYSTEM | |
| C26004-9 | PLUG ASSY |
| C26005-1 | Test Box - APU/Engine Fire Detection System |
| C26006-1 | TOOL |
| C26006-29 | TEST BOX |
| C26006-54 | TEST BOX |
| C26006-70 | TEST BOX – CARGO FIRE EXTINGUISHING SYSTEM |
| C26007-4 | ADAPTER CABLE ASSY |
| C26007-72 | TEST EQUIPMENT-COMPARTMENT OVERHEAT DETECTION (M237 IN LINE) |
| C26007-78 | TEST EQUIPMENT |
| C26008-1 | Installation/Removal Equipment - Cargo Fire Extinguisher Bottle |
| C26008-148 | Removal/installation eqpt-cargo firex bottle |
| C26010-1 | COVER - WARNING HORN, APU FIRE DETECTION SYSTEM |
| C26011-1 | Alignment Equipment - Fire Suppression Bottle Nozzle |
| C27001-16 | SPACER ASSY |
| C27001-3 | PIN ASSY |
| C27001-34 | GROUND LOCK SET |
| C27001-41 | SPACER ASSY |
| C27001-42 | SPACER ASSY |
| C27001-43 | RIGGING SPACEER(.163) |
| C27001-51 | GROUND LOCK SET -OUTBOARD SPOILER ACTUATORS |
| C27003-38 | SPREADER ASSY |
| C27007-31 | TESTER SWITCH STABIL |
| C27007-46 | TEST BOX |
| C27008-14 | CONTROL HANDLE LOCKOUT ASSY |
| C27008-15 | CIRCUIT BREAKER LOCKOUT ASSY |
| C27008-22 | FLAP LOCKOUT EQUIPMENT |
| C27012-14 | LOCKOUT SET |
| C27019 | TOOL |
| C27022-1 | CLAMP SET |
| C27025-1 | TORQUE WRENCH EQUIPMENT – RUDDER POWER CONTROL UNIT ATTACHMENT |
| C27026-24 | TEST FIXTURE – BRAKE ASSEMBLY, STABILIZER TRIM ACTUATOR |
| C27028-1 | RIGGING BAR |
| C27028-21 | RIGGING BAR EQPT |
| C27028-41 | RIGGING BAR - ELEVAT |
| C27030-2 | TEST EQUIPMENT-FLAP SCREW BACKLASH |
| C27030-3 | MEASURE ASSY |
| C27030-33 | TEST EQUIPMENT-FLAP SCREW BACKLASH |
| C27030-49 | TEST EQUIPMENT-FLAP SCREW BACKLASH |
| C27030-94 | TEST EQUIPMENT FLAP |
| C27032-1 | MEASUREHENT EQPT |
| C27033-1 | WRENCH – RETAINING NUT, STABILIZER TRIM ACTUATOR |
| C27033-5 | WRENCH – RETAINING NUT, STABILIZER TRIM ACTUATOR |
| C27033-6 | WRENCH – RETAINING NUT, STABILIZER TRIM ACTUATOR |
| C27034-1 | SLING EQPT |
| C27034-31 | SLING EQUIPMENT |
| C27034-45 | fitting assy |
| C27034-51 | TOOL |
| C27035-20 | SLING EQPT |
| C27035-22 | WEB ASSY |
| C27036-1 | SUPPORT SET – FORWARD ELEVATOR CONTROL QUADRANT |
| C27038-6 | LOCKOUT PIN, L.E. CRUISE DEPRESSURIZATION VALVE |
| C27038-7 | TOOL |
| C27039-1 | SPANNER WRENCH – HINGE BEARING, HORIZONTAL STABILIZER |
| C27040-1 | HOIST ADAPTER |
| C27040-29 | HOIST ADAPTER – INSTALLATION/REMOVAL, FLAP TRACK |
| C27041-1 | WRENCH |
| C27042-1 | TORQUE WRENCH EQPT |
| C27044-15 | RIGGING BEAM – ELEVATOR INDEX PLATE INSTALLATION |
| C27045-1 | RIGGING KIT |
| C27045-5 | Preload Shim Assy |
| C27046-1 | LOCK SET |
| C27046-13 | LOCK SET |
| c27046-14 | LOCK ASSY |
| C27046-2 | LOCK ASSY |
| C27046-21 | LOCK SET |
| C27047-19 | LOCK SET |
| C27047-2 | TOOL |
| C27047-21 | TOOL |
| C27047-41 | LOCK SET |
| C27047-42 | LOCK SET |
| C27047-43 | LOCK SET |
| C27047-44 | SHORT LOCK ASSY |
| C27047-45 | LONG LOCK ASSY |
| C27049-36 | REMOVAL/INSTALLATION EQUIPMENT – RUDDER POWER CONTROL UNIT |
| C27050-125 | EQUIP HANDLE JACKSCREW |
| C27050-32 | HANDLING EQPT - JACKSCREW, STABILIZER R/I |
| C27050-5 | BOIST ADAPTER ASSY |
| C27050-82 | HANDLING EQUIPMENT |
| C27050-89 | HALF COLLAR |
| C27051-1 | LOCK SET |
| C27051-2 | LCOK ASSY,FLAP |
| C27051-29 | LOCK SET |
| C27051-3 | LOCK ASSY,SLAT |
| C27051-30 | LOCK ASSY,SLAT |
| C27052-39 | SLING EQUIPMENT – TRAILING EDGE FLAPS |
| C27054-1 | THREAD PROTECTOR SET – HORIZONTAL STABILIZER HINGE PIN |
| C27055-1 | AILERON SLING |
| C27056-35 | SLING EQUIPMENT – LEADING EDGE SLAT, REMOVAL AND INSTALLATION |
| C27057-1 | LOCK |
| C27057-2 | LOCK ASSY |
| C27060-1 | ADAPTER EQUIPMENT - CONTROL WHEELS |
| C27060-22 | ADAPTER ENGINE CONTR |
| C27060-23 | TOOL |
| C27061-1 | ADAPTER – WRENCH, FLIGHT SPOILER ACTUATOR POWER CONTROL UNIT |
| C27064-1 | TORQUE WRENCH ADAPTER – MANUAL STABILIZER TRIM WHEEL |
| C27065-1 | CHECK EQUIPMENT – JACKSCREW BACKLASH, HORIZONTAL STABILIZER |
| C27065-20 | EQUIP JACKSCREW BACKLASH H/S |
| C27066-1 | LOCK EQPT |
| C27069-20 | RIGGING EQPT |
| C27075-1 | SPANNER WRENCH – BRAKE NUT, STABILIZER TRIM ACTUATOR |
| C27075-9 | SPANNER WRENCH – BRAKE NUT, STABILIZER TRIM ACTUATOR |
| C27078-1 | MEASUREMENT TOOL |
| C27080-1 | DRUM WRENCH – STABILIZER TRIM ACTUATOR |
| C27082-1 | FIXTURE EQPT |
| C27082-5 | CONICAL PIN |
| C27083-1 | RIGGING BAR |
| C27083-18 | Rigging Bar - Elevator Tab |
| C27083-2 | RIGGIING BAR ASSY |
| C27084-1 | TEST EQUIPMENT |
| C27085-1 | REMOCAL/INSTALLATION EQPT |
| C27086-1 | SPRING REM/INSTL EQPT |
| C27086-27 | SPRING REM/INSTL EQPT |
| C27090-1 | TORQUE SOCKET – UPPER STOP, STABILIZER TRIM JACK SCREW |
| C27091-1 | Lock Set-Flight Spoiler Actuator |
| C27092-1 | Rigging Beam - Elevator Index Plate Installation |
| C27095-1 | RIGGING LOCK - FOUR DEGREE ，SPEEDBRAKE LEVER |
| C27096-1 | Rigging Tool - Aileron |
| C27097-1 | STRAIGHT EDGE – CONTROL WHEEL |
| C27104-14 | INSPECTION TOOL |
| C27107-1 | LOCK SET - FLIGHT SPOILER ACTUATOR |
| C27107-2 | TOOL |
| C28001-1 | ADAPTER – SUMP DRAIN, CENTER WING TANK |
| C28002-10 | SPANNER ASSY |
| C28002-9 | SPANNER WRENCH |
| C28004-1 | TEST EQUIPMENT-FUEL FEED LINE |
| C28004-22 | PLUG ASSY |
| C28004-24 | GAUGE ASSY |
| C28005-1 | SUMP DRAIN FIXTURE |
| C28008-1 | TEST EQUIPMENT – FUEL TANK AND VENT SYSTEM |
| C28010-1 | PRIMING BOTTLE |
| C28012-1 | TEST ASSEMBLY – FLOAT SWITCH CONDUIT |
| C28013-17 | TOOL |
| C28013-18 | TOOL |
| C28013-19 | TOOL |
| C28013-20 | TOOL |
| C28013-27 | TOOL |
| C28013-28 | TOOL |
| C28013-3 | PROTECTIVE EQUIPMENT |
| C28013-4 | PROTECTIVE EQUIPMENT |
| C28013-6 | PROTECTIVE EQUIPMENT |
| C28013-8 | PROTECTIVE EQUIPMENT |
| C28014-1 | FUEL FEED TEST EQPT |
| C2821-0064W01 | SEAL INSTALLATION TOOL |
| C29002-17 | TST BOX-RUDDER PCU |
| C29003-1 | SEAL INSTALLATION EQUIPMENT – HYDRAULIC SWIVEL ASSEMBLY |
| C29003-8 | SEAL INSTALLATION EQUIPMENT – HYDRAULIC SWIVEL ASSEMBLY |
| C29006-27 | ADAPTER – GROUND SERVICE CONNECTION, HYDRAULIC POWER |
| C29006-28 | TOOL |
| C29006-3 | TOOL |
| C29007-1 | TORQUE TOOL SET – AC MOTOR DRIVEN HYDRAULIC PUMP |
| C29008-1 | SEAL COMPRESSION EQUIPMENT – HYDRAULIC SWIVEL ASSEMBLY |
| C32002-1 | RING COMPRESSOR, NOSE LANDING GEAR INNER CYLINDER |
| C32007-1 | MANDREL – BEARING INSTALLATION, MAIN LANDING GEAR FORWARD TRUNNION |
| C32008-1 | HOLDING FIXTURE – MAIN LANDING GEAR DAMPER ASSEMBLY |
| C32011-10 | SOCKET |
| C32011-7 | SOCKET EQPT |
| C32011-8 | CAP ASSY |
| C32012-12 | Removal Instl Eqpt – Wheel Retention Nut – MLG NLG |
| C32012-13 | MLG SOCKET ASSY |
| C32012-19 | 1/2' -> 3/4' ADAPTER |
| C32012-1922 | TOOL |
| C32012-22 | TOOL |
| C32012-3 | NLG SOCKET |
| C32012-5653 | TOOL |
| C32013-1 | WRENCH ADAPTER ASSY |
| C32013-15 | Torque wrench adapter |
| C32013-16 | TOOL |
| C32013-2 | ADAPTER ASSY |
| C32013-9 | TORQUE WRENCH ADAPTER – AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION |
| C32014-1 | SPRING EXTENDER |
| C32014-2 | EXTENDER ASSY |
| C32014-20 | TOOL |
| C32014-29 | Spring |
| C32015-1 | PULLER EQPT |
| C32015-18 | PULLER EQPT |
| C32015-34 | PULLER-FUSE PIN MLG FORWARD |
| C32016 | REVL/INSTL EQPT-NLG LOWER SEALS |
| C32016-2 | SCRAPER PLUNGER |
| C32016-3 | SCRAPER REDUCER |
| C32016-33 | RMVL/INSTL EQPT |
| C32016-34 | SEAL INSTALLER ASSY |
| C32016-35 | CENTERING ASSY |
| C32016-4 | SCRAPER LETAINER |
| C32016-45 | Dynamic Seal Guide |
| C32016-46 | RMVL/INSTL EQPT |
| C32016-47 | RAM ASSY |
| C32016-48 | Excluder Plunger |
| C32016-5 | SCRAPER LOCK ASSY |
| C32016-66 | RAM ASSY |
| C32017-29 | Dynamic Seal Sleeve |
| C32017-30 | RAM ASSY |
| C32017-46 | Retainer Pin |
| C32017-52 | REPLACEMENT EQPT |
| C32017-53 | REPLACEMENT EQPT |
| C32017-54 | Dynamic Seal Sleeve |
| C32017-9 | Thrage Box Assy |
| C32018-1 | EQUIPMENT – PROTECTION GUIDE, MAIN LANDING GEAR AND NOSE LANDING GEAR LOWER SEALS |
| C32019-1 | EXTENSION |
| C32019-2 | EXTENSION |
| C32020-1 | EXTENSION BAR ASSY |
| C32020-15 | ADAPTER ASSY |
| C32021-1 | WRENCH SET |
| C32022-15 | NLG AXLE THREAD PROTECTOR EQPT |
| C32022-16 | MLG THREAD PROTECTOR |
| C32022-17 | NLG AXLE THREAD PROTECTOR EQPT |
| C32022-18 | MLG HTREAD PROTECTOR |
| C32022-2 | NLG AXLE THREAD PROTECTOR EQPT |
| C32022-20 | THREAD PROTECTOR EQUIPMENT – MAIN LANDING GEAR/NOSE LANDING GEAR AXLE |
| C32022-21 | NLG AXLE THREAD PROTECTOR |
| C32022-23 | THREAD PROTECTOR EQUIPMENT – MAIN LANDING GEAR/NOSE LANDING GEAR AXLE |
| C32022-24 | Mlg Axle Protector Assy |
| C32022-26 | Mlg Thread Protector |
| C32022-3 | Mlg Axle Protector Assy |
| C32022-32 | THREAD PROTECTOR EQUIPMENT – MAIN LANDING GEAR/NOSE LANDING GEAR AXLE |
| C32022-35 | THREAD PROTECTOR EQUIPMENT – MAIN LANDING GEAR/NOSE LANDING GEAR AXLE |
| C32022-36 | NLG AXLE THREAD PROTECTOR |
| C32022-38 | MLG AXLE THREAD PROTECTOR EQPT |
| C32022-39 | Thread protector eqpt |
| C32022-40 | MLG THREAD PROTECTOR |
| C32022-42 | MLG THREAD PROTECTOR |
| C32023-1 | WRENCH – TRUNNION SPHERICAL BEARING, MAIN LANDING GEAR |
| C32023-12 | WRENCH-TRUNNION SPHE |
| C32025-1 | SPANNER WRENCH – GLAND NUT, NOSE LANDING GEAR |
| C32025-7 | SPANNER WRENCHNLG |
| C32025-8 | WRENCH ASSEMBLY |
| C32026-12 | DOWNLOCK PIN ASSY |
| C32026-15 | DOWNLOCK EQPT - NLG AND MLG |
| C32026-16 | Downlock pin assy |
| C32026-2 | DOWNLOCK PIN ASSY |
| C32026-6 | DOWNLOCK EQPT |
| C32028-1 | RMVL/INSTL EQPT |
| C32028-109 | RMVL/INSTL EQPT - WALKINGBEAM ASSY,MAIN LANDINGGEAR |
| C32028-110 | REMOVAL/INSTALLATION EQUIPMENT – WALKING BEAM ASSEMBLY, MAIN LANDING GEAR |
| C32028-111 | Rmvl/instl eqpt-walking beam assy，main landing gear |
| C32028-3 | RMVL/INSTL EQPT |
| C32028-56 | RMVL/INSTL EQPT |
| C32028-58 | RMVL/INSTL EQPT |
| C32028-59 | RMVL/INSTL EQPT |
| C32029-1 | PIN INSTL/RMVL KIT |
| C32029-10 | THREAD PROTECTOR |
| C32029-11 | SLUG DRIVER |
| C32029-12 | THREAD PROTECTOR |
| C32029-15 | THREAD PROTECTOR |
| C32029-16 | THREAD PROTECTOR |
| C32029-3 | WRENCH ADAPTER ASSY |
| C32029-31 | WRENCH ADAPTER ASSY |
| C32029-33 | THREAD PROTECTOR |
| C32029-38 | PIN INSTL/RMVL KIT |
| C32029-39 | WRENCH ASSY |
| C32029-45 | PIN INSTL/RMVL KIT |
| C32029-48 | Wrench Adapter |
| C32029-49 | Wrench Adapter |
| C32029-50 | Wrench Adapter |
| C32029-51 | Thread Protector |
| C32029-6 | WRENCH ADAPTER ASSY |
| C32029-7 | WRENCH ADAPTER ASSY |
| C32029-87 | TOOL |
| C32030-10 | RETENTION STRAP EQPT |
| C32030-11 | RETENTION STRAP ASSY |
| C32030-31 | RETENTION STRAP EQPT. |
| C32031-1 | REMOVAL/INSTL EQPT |
| C32031-22 | REMOVAL/INSTL EQPT-AFT TRUNNION PIN, MLG |
| C32031-5 | PULL ADAPTER ASSY |
| C32032-125 | PULLER EQUIPMENT – AXLE/BRAKE SLEEVE, MAIN LANDING GEAR |
| C32032-98 | PULLER EQUIPMENT – AXLE/BRAKE SLEEVE, MAIN LANDING GEAR |
| C32033-1 | RML/INSTL EQPT |
| C32033-20 | SMALL SLIDE HAMMER |
| C32033-21 | SLIDE SCREW |
| C32033-22 | SLIDE HAMMER |
| C32033-4 | DRAG STRUT ALIGN SLUG |
| C32033-5 | DRAG STRUT TRUN PIN PULLER ASSY |
| C32033-6 | NLG TRUNNION PIN PULLER ASSY |
| C32034-14 | SIDE STRUT ATTACH ASSY |
| C32034-212 | MLG SUPPORT ASSY |
| C32034-213 | DOLLY ASSY |
| C32034-227 | RMVL/INSTL EQPT,MLG |
| C32034-228 | PROTECTOR ASSY |
| C32034-23 | HYDRAULIC CIRCUIT |
| C32034-235 | PROTECTOR ASSY |
| C32034-238 | TOOL |
| C32034-29 | WINCH CABLE ASSY |
| C32034-339 | RMVL/INSTL EQPTN+ÎMAIN LANDING GEAR |
| C32034-343 | TOOL |
| C32034-6 | LEVER BAR ASSY |
| C32034-9 | PROOF LOAD ASSY |
| C32035-1 | METERING PIN AND RETAINER RING REMOVAL/INSTALLATION EQUIPMENT – NOSE LANDING GEAR |
| C32035-3 | SOCKET ASSEMBLY |
| C32035-5 | Knockout Rod Assembly |
| C32035-6 | WRENCH ASSEMBLY |
| C32036-89 | TOOL |
| C32036-92 | FIXTURE EQUIPMENT – ACTUATOR ASSEMBLIES, NOSE LANDING GEAR |
| C32037-1 | HOLDING FIXTURE |
| C32038-41 | Downlock Spanner |
| C32038-55 | ROD END BEARING REMOVAL/INSTALLATION EQUIPMENT – ACTUATORS MAIN LANDING GEAR (MLG) |
| C32038-56 | Stand Assy |
| C32038-57 | V-BLOCK ASSEMBLY |
| C32038-81 | Rod end bearing rmvl/instl eqpt-actuators，MLG |
| C32039-1 | ADAPTER – FUNCTIONAL TEST, NOSE LANDING GEARSTEERING ACTUATOR |
| C32040-1 | SPANNER WRENCH – NOSE LANDING GEAR STEERING COLLAR RETAINER |
| C32040-4 | SPANNER WRENCH |
| C32040-6 | SPANNER WRENCH – NOSE LANDING GEAR STEERING COLLAR RETAINER |
| C32041-57 | BUILDUP EQUIPMENT – NOSE LANDING GEAR |
| C32042-61 | REMOVAL/INSTALLATION EQUIPMENT – ORIFICE TUBE AND METERING PIN, MAIN LANDING GEAR |
| C32043 | WRENCH |
| C32043-1 | WRENCH |
| C32043-2 | WRENCH |
| C32044-1 | FREEPLAY CHECK EQPT-NLG |
| C32045-13 | TOOL |
| C32045-23 | HOLDING FIXTURE |
| C32046-1 | HOLDING FIXTURE EQUIPMENT – SHIMMY DAMPER ASSEMBLY, MAIN LANDING GEAR |
| C32046-25 | HOLDING FIXTURE EQUIPMENT – SHIMMY DAMPER ASSEMBLY, MAIN LANDING GEAR |
| C32048-1 | ADAPTER ASSY-UPLOCK,MAIN LANDING GEAR |
| C32049-1 | OUTRIGGING ASSY-RMVL AND INSTL/FROUND HANDLING,NLG |
| C32050-1 | LOCKOUT PIN – TAIL SKID |
| C32052-1 | LEVEL TOOL |
| C32053-1 | FIXTURE EQPT |
| C32053-37 | FIXTURE EQUIPMENT – SIDE STRUT ASSEMBLY, MAIN LANDING GEAR |
| C32053-39 | Large Diamond Check Pin |
| C32053-41 | FIXTURE EQUIPMENT – SIDE STRUT ASSEMBLY, MAIN LANDING GEAR |
| C32054-1 | Rmvl/Instl Equipment |
| C32054-6 | TOOL |
| C32055-1 | CLAMP ASSEMBLY – STEERING CABLES, NOSE LANDING GEAR |
| C32055-18 | CLAMP ASSY-STEERING CABLESN+ÎNLG |
| C32062-1 | TOOL |
| C32067-1 | TOOL |
| C32077-1 | MLG GLAND NUT REMOVAL |
| TOOL | |
| C32078-1 | DOLLY – TRANSPORTATION, SIDE STRUT DOLLY |
| C33001-58 | TEST CABLING – 737 BOEING SKY INTERIOR LIGHT ASSEMBLIES |
| C34005-16 | TOOL |
| C35001-1 | PRESSURE LEAK TEST EQPT |
| C35001-37 | PRESSURE LEAK TEST EQUIPMENT – CREW OXYGEN SYSTEM |
| C35001-38 | PRESSURE LEAK TEST EQUIPMENT – CREW OXYGEN SYSTEM |
| C35003-10 | RETRACTION EQUIPMENT |
| C35003-11 | Safety Pin Assy |
| C35003-13 | RETRACTION EQPT |
| C35003-20 | RETRACTION EQUIPMENT – FIRING PIN, OXYGEN SYSTEM |
| C35003-3 | SAFETY PIN ASSY |
| C35004-1 | PRY BAR EQPT - FIRINGPIN，PSU |
| C36001-10 | TOOL |
| C36001-110 | LONG HOSE ASSY |
| C36001-111 | TEST EQUIPMENT – ENGINE BLEED AIR SYSTEMS |
| C36001-17 | MALE ADAPTER AN4/MS4 |
| C36001-2 | 30 PSI GAGE ASSY |
| C36001-44 | TEST EQUIPMENT |
| C36001-45 | REGULATOR ASSY |
| C36001-51 | Test equipment-engine bleed air systems |
| C36001-63 | TEST EQUIPMENT |
| C36001-64 | TEST EQUIPMENT |
| C36001-70 | Plug With 0.032 Inch Hole An4 |
| C36001-71 | 30 PSI GAUGE ASSY |
| C36001-72 | 30 PSI GAUGE AND VALVE ASSY |
| C36001-73 | 60 PSI GAUGE ASSY |
| C36001-74 | REQULATOR ASSY |
| C36001-82 | SHORT HOSE ASSY |
| C36001-9 | TOOL |
| C36002-1 | DISPATCH KIT – PRECOOLER CONTROL VALVE |
| C36002-3 | Blank Tube Fitting Reducer |
| C36003-1 | PRECOOLER RMVL/INSTL EQPT CFM LEAP-1B ENGINE REMOVED |
| C36003-23 | Equipment - Removal/Installation, LEAP-1B Engine Precooler - Engine Off |
| C36004-1 | PRECOOLER REMOVAL AND INSTALLATION EQPT - ENGINE ON |
| C36005-1 | SLING - PRECOOLER |
| C36005-37 | Sling - Precooler |
| C36006-1 | TEST EQUIPMENT - AIR SUPPLY CONTROL |
| C36007-1 | BLANKING PLATE |
| C36007-11 | BLANKING PLATE |
| C36007-12 | BLANKING PLATE |
| C36008-1 | BLANKING PLATE ASSY |
| C36008-2 | BLANKING PLATE |
| C36008-3 | TOOL |
| C38001-23 | DRAIN MAST PLUG |
| C38001-29 | DRAIN MAST PLUG - WASTE WATER |
| C38002-1 | PLUG EQUIPMENT – SKIN FITTING, DOOR SILL DRAIN |
| C38003-1 | INSTALLATION ASSY |
| C44001-48 | REMOVAL/INSTALLATION EQUIPMENT – LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME |
| C44001-49 | Radome lift assy |
| C44001-55 | REMOVAL/INSTALLATION EQUIPMENT – LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME |
| C44001-56 | Antenna lift assy |
| C44001-58 | TOOL |
| C47001-1 | Test eqpt-neads negative pressure leak check |
| C47001-72 | TEST EQUIPMENT – NITROGEN ENRICHED AIR DISTRIBUTION SYSTEM NEGATIVE PRESSURE LEAK CHECK |
| C47002-30 | TEST EQUIPMENT - OXY |
| C47248 | CONE |
| C47261 | ADAPTOR NLG AXLE NUT |
| C47271 | LOCATING PIN |
| C47281 | LOCK |
| C47281-1000 | SAFETY COLLARS |
| C47465 | PIN-RIGGING |
| C47511 | ADAPT0R UPPER TORQUE |
| C47548 | TOOL |
| C47569 | TOOL |
| C47574 | EXTRACTOR |
| C47578 | PROTECTOR |
| C475782 | TOOL |
| C47621 | PIN LOCATE |
| C47647 | EXTRACTOR |
| C47648 | ADAPTOR |
| C47940 | EXTRACTOR |
| C47943 | ADAPTER |
| C47944 | RETAINING WRENCH |
| C47955 | CASTELLATED WRENCH |
| C49003-1 | LIFT EQPT |
| C49004-10 | AFT ADAPTER ASSY |
| C49004-13 | LIFT EYE |
| C49004-36 | SLING EQUIPMENT |
| C49004-37 | SLING EQUIPMENT |
| C49004-39 | SLING EQUIPMENT |
| C49004-40 | SLING EQUIPMENT |
| C49004-41 | LIFT FITTING KIT |
| C49004-42 | APU SLING ASSY |
| C49004-52 | SLING EQPT - APU - SCREW SHACKLE |
| C49004-53 | TOOL |
| C49006-1 | THREAD PROTECTOR EQPT-APU MOUNT BOLTS |
| C49006-3 | ALIGNMENT PIN ASSY |
| C49007-1 | EQUIP HANDLE HOIST APU |
| C49007-35 | CABLE HOIST EQPT |
| C49007-36 | CHAIN HOIST EQPT |
| C49007-42 | HOIST EQPT |
| C49008-37 | EQUIP JACK APU |
| C49009-1 | TOOL KIT – AUXILIARY POWER UNIT DELETION |
| C49010-1 | TOOL |
| C49010-41 | FWD ATTACH ASSY |
| C49010-42 | RH AFT ATTACH ASSY |
| C49010-43 | LH AFT ATTACH ASSY |
| C49010-50 | CRADLE ASSY-AE131-10B APU |
| C49011-1 | TEST EQUIPMENT – FUEL FEED, AUXILIARY POWER UNIT |
| C49012-1 | INSTL/RMVL EQPT-APU EXHAUST |
| C52001-1 | HOLDING FIXTURE – COMPRESSED SPRING CARTRIDGE |
| C52002-32 | FIXTURE,FWD |
| C52002-33 | FIXTURE,AFT |
| C52004-1 | SPRING-LOADING CONTROL EQPT |
| C52005-1 | FIXTURE EQUIPMENT – AUTOMATIC OVERWING EXIT DOOR SPRING |
| C52006-1 | ESCAPE SLIDE PASSENGER DOOR SIMULATOR |
| C52006-41 | RIGGING SIMULATOR |
| C52006-43 | WEIGHT ASSY |
| C52006-44 | WEIGHT ASSY |
| C52006-64 | RIGGING SIMULATOR |
| C52006-65 | 11 LB WEIGHT ASSY |
| C52006-74 | RIGGING SIMULATOR |
| C52007-1 | TORQUE WRENCH ADAPTER EQUIPMENT – AUTOMATIC |
| C52008-1 | TORQUE WRENCH ASSEMBLY – GALLEY AND ENTRY DOOR |
| C52010-1 | SUPPORT EQUIPMENT – MID-EXIT DOOR |
| C52011-1 | SAFETY BARRIER – MID-EXIT DOOR |
| C52012-15 | PERSONNEL BARRIER – ENTRY AND GALLEY DOORS |
| C52012-29 | PERSONNEL BARRIER – ENTRY AND GALLEY DOORS |
| C52012-59 | PERSONNEL BARRIER – ENTRY AND GALLEY DOORS |
| C52012-66 | SAFETY BARRIER |
| C52013-1 | TRANSPORTATION SLING EQPT |
| C52013-41 | TRANSPORTATION SLING EQUIPMENT – FORWARD AIRSTAIR |
| C52014-1 | REMOVAL/INSTALLATION EQUIPMENT – FORWARD AIRSTAIR |
| C53002-1 | RMVL/INSTL ASSY - TAIL CONE |
| C54001-28 | ATTACH BEAM ASSY |
| C54001-3 | SLING ASSY |
| C54001-30 | SPREADER BAR ASSY |
| C54001-37 | SLING EQUIPMENT |
| C54001-38 | INBD SLING ASSY |
| C54001-40 | ADJ SLING ASSY |
| C54003-1 | SOCKET,FUSE BOLT |
| C54004-1 | SLING EQPT |
| C54004-11 | SLING EQUIPMENT – CFM56-3 ENGINE |
| C54005-1 | REM/INSTL EQPT |
| C54007-1 | FEELER GAUGE – CFM56-7 STRUT TO WING |
| C54008-1 | AFT FAIRING – REMOVAL AND INSTALLATION |
| C54008-28 | AFT FAIRING – REMOVAL AND INSTALLATION |
| C54008-53 | AFT FAIRING-REMOVAL & IINSTALLATION |
| C54008-54 | AFT FAIRING – REMOVAL AND INSTALLATION |
| C54009-27 | REMOVAL/INSTALLATION KIT – FUSE PIN |
| C54010-26 | SLING EQPT |
| C54010-29 | SLING EQUIPMENT – FUSE PIN REMOVAL/INSTALLATION, CFM56-7 |
| C54011-59 | EQUIP STRUT ENGINE |
| C54013-1 | ALIGNMENT EQUIPMENT – ECCENTRIC |
| C54014-1 | BEARING REPLACEMENT EQUIPMENT – THRUST REVERSER HINGE |
| C54014-29 | TOOL |
| C54015-1 | Spanner wrench-thrust reverser hinge fitting |
| C54015-2 | Spanner wrench |
| C54016-1 | Sling Eqpt - Engine Strut Removal/Installation, CFM LEAP-1B Engine |
| C54017-1 | Aft Fairing - Removal & Installation |
| C54017-90 | TOOL |
| C54018-1 | ALIGNMENT EQPT ECCENTRIC BUSHING，ENGINE STRUT SIDE LINK |
| C54019-1 | Sling Equipment - Fuse Pin R/I, LEAP-1B engine |
| C54021-1 | Sling Eqpt - Fuse Pin Removal, CFM LEAP, Preload/Unload |
| C54022-1 | Rmvl / Instl - Fuse Pin |
| C55001-1 | SLING-ELEVATOR |
| C55001-12 | COUNTER BALANCE |
| C55001-4 | PIN |
| C55002-1 | PUNCH SET – HORIZONTAL STABILIZER CENTER SECTION HINGE PIN REMOVAL |
| C55004-1 | SLING EQPT |
| C55004-26 | BRIDLE ASSY |
| C55005-1 | PIN REMOVAL EQPT |
| C55005-11 | PIN REMOVAL EQPT |
| C55005-19 | PIN REMOVAL EQUIPMENT – HORIZONTAL STABILIZER |
| C55007-1 | SLING EQPT |
| C55007-2 | SLING ASSY |
| C55007-29 | SLING EQPT |
| C55007-31 | SLING ASSY |
| C55007-36 | TOOL |
| C55007-37 | TOOL |
| C55008-1 | ALIGNMENT EQUIPMENT – HORIZONTAL STABILIZER INSTALLATION |
| C55008-18 | ALIGNMENT EQUIPMENT – HORIZONTAL STABILIZER INSTALLATION |
| C55009-1 | ALIGNMENT TOOL – FIN INSTALLATION |
| C55010-1 | SLING EQUIPMENT – VERTICAL FIN |
| C55010-33 | SLING EQUIPMENT – VERTICAL FIN |
| C55011-6 | SPANNER WRENCH |
| C55014-1 | Sling Equipment - Horizontal Stabilizer, Removal/Instl |
| C56001-1 | WINDOW LATCH TORQUING SOCKET ASSEMBLY – RIGHT AND LEFT HAND |
| C57002-15 | SLING EQPT |
| C57002-22 | SLING EQPT |
| C57002-66 | SLING EQUIPMENT - REM/INST, WING |
| C57003-1 | TEST EQIPMENT |
| C57003-49 | TEST |
| C57006-1 | Holding Fixture - Winglet |
| C57007-1 | TOOL |
| C57007-25 | TOOL |
| C71001-1 | Adapter Wrench Aft Conebo |
| C71002-91 | Thrust reverser & cowling handling equipment |
| C71003-117 | FWD INBD BOIST FITTING ASSY |
| C71003-118 | FWD OUTBD HOIST FITTING ASSY |
| C71003-128 | FWD CENTER BEAM ASSY |
| C71003-129 | FWD INBD BEAM ASSY |
| C71003-130 | FWD OUTBD BEAM ASSY |
| C71003-219 | AFT L.H. BEAM ASSY |
| C71003-220 | AFT R.H. BEAM ASSY |
| C71003-221 | TOOL |
| C71003-236 | TOOL |
| C71003-237 | TOOL |
| C71003-247 | BOOTSTRAP EQUIPMENT |
| C71003-248 | TOOL |
| C71003-3 | ATTACH FITTING |
| C71003-68 | CABLE ASSY |
| C71004-1 | SLING – INLET COWL, CFM56-3 ENGINE |
| C71005-42 | SLING ASSY |
| C71006-10 | THREAD PROTECTOR |
| C71006-5 | THREAD PROTECTOR |
| C71006-7 | THREAD PROTECTOR |
| C71006-8 | THREAD PROTECTOR |
| C71006-9 | THREAD PROTECTOR EQPT |
| C71010-1 | PROOF LOAD EQUIPMENT – CFM56-3 ENGINE CRADLE |
| C71013-1 | SAFETY SCREEN – PERSONNEL BARRIER, CFM56-3 INLET |
| C71014-1 | Adapter Wrench - Aft Cone Bolt Nut - CFM56-3 Engine |
| C71015-57 | TOOL |
| C71015-60 | TOOL |
| C71015-69 | Fwd Attach Assy Lh |
| C71015-70 | Aft Attach Assy |
| C71015-76 | TOOL |
| C71015-79 | ENGINE SLING EQUIPMENT – OVERHEAD SHOP HANDLING |
| C71015-80 | TOOL |
| C71015-83 | ENGINE SLING EQUIPMENT |
| C71015-84 | TOOL |
| C71015-85 | TOOL |
| C71018-1 | Alignment Guide - Cone Bolt Forward Engine Mount - CFM56-3 |
| C71018-2 | TOOL |
| C71019-1 | WRENCH |
| C71019-7 | WRENCH |
| C71020-105 | Bootstrap Equipment - CFM56-7 Engine |
| C71020-111 | RIGHT LOWER LINK ASSY |
| C71020-115 | TOOL |
| C71020-117 | TOOL |
| C71020-118 | TOOL |
| C71020-13 | STABILIZER BAR ASSY |
| C71020-134 | TOOL |
| C71020-2 | STABILIZER ASSY |
| C71020-51 | ARM SHEAR PIN |
| C71020-69 | FORWARD JOIN PIN ASSY |
| C71020-73 | OPP-72 |
| C71020-8 | AFT BOOTSTRAP ARM ASSY |
| C71020-82 | INBOARD ARM ASSY |
| C71020-91 | BOOTSTRAP EQPT |
| C71020-92 | LEFT HAND DYBAMOMETER ASSY |
| C71020-93 | RIGHT HAND DYNAMOMETER ASSY |
| C71022-6 | TORQUE WRENCH |
| C71022-7 | TOOL |
| C71022-8 | TOOL |
| C71023-1 | PROOF LOAD FIXTURE |
| C71024-1 | SLING ASSEMBLY – AFT ENGINE MOUNT, CFM ENGINE |
| C71024-10 | SLING ASSEMBLY – AFT ENGINE MOUNT, CFM ENGINE |
| C71024-20 | SLING ASSEMBLY – AFT ENGINE MOUNT, CFM ENGINE |
| C71025-1 | SAFETY SCREEN – PERSONNEL BARRIER, CFM56-7 INLET |
| C71026-1 | SLING EQUIP |
| C71027-1 | INSTALLATION/REMOVAL FRAME EQPT-INLET COWL7 |
| C71029-1 | BOOTSTRAP EQPT-CFM LEAP-1B ENGINE |
| C71030-1 | Fixture -Proofload, LEAP - 1B |
| C71031-1 | SLING EQPT - FAN COWL，CFM LEAP-1B ENGINE/CFMLEAP-1B |
| C71032-1 | Safety Screen - Personnel Barrier, LEAP-1B Inlet |
| C71033-1 | REMOVAL/INSTALLATIONFRAME EQPT - INLETCOWL，CFM LEAP-1BENGINE/CFM LEAP-1B |
| C71034-1 | INLET GUARD – ENGINE RUN-UP |
| C71035-1 | LANYARD-PERSONNEL SAFETY |
| C71036-1 | STABILIZER - ENGINEMOUNT，CFM LEAP-1B/CFMLEAP-1B |
| C71037-1 | SUPPORT - ENGINE ANTI-ICE DUCT，CFM LEAP-1B/CFM LEAP-1B |
| C71038-1 | Alignment / Thread Protector |
| C71039-1 | Engine Sling Equipment - Overhead Shop Handling |
| C71040-1 | Torque Equipment - Engine Mount Bolt |
| C71040-30 | TORQUE EQUIPMENT – ENGINE MOUNT BOLTS, CFM LEAP-1B |
| C71040-34 | TOOL |
| C71040-5 | TOOL |
| C71041-1 | UNLOCK POLE - FAN COWL HOLD OPEN RODS |
| C71043-1 | CLAMP SET - HOLD OPE |
| C75001-1 | SWITCH PUSHER, SYSTEM TEST |
| C76001-10 | Rigging Pin - 737-300/400/500 |
| C76001-11 | RIGGING PIN |
| C76001-12 | RIGGING PIN |
| C76001-9 | RIGGING PIN |
| C76002 | HAND TOOL SET-CONTROL STAND,DISASSEMBLY/ASSEMBLY |
| C76002-10 | LOCK WASHER BREAK TOOL |
| C76002-2 | SCREWDRIVER ASSY |
| C76002-20 | TOOL |
| C76002-24 | CONTROL STAND EQPT |
| C76002-25 | CONTROL STAND EQPT |
| C76002-26 | CONTROL STAND EQPT |
| C76002-30 | CONTROL SHAFT NUT SOCKET |
| C76002-6 | RIGHT CONTROL SHAFT WRENCH |
| C76002-8 | CONTROL SHAFT NUT WRENCH |
| C76002-9 | LOCKWASHER REMOVAL TOOL |
| C77004-10 | TEST BOX-GENERIC AVM INTERFACE |
| C78001-13 | HOLD OPEN ROD |
| C78001-14 | FITTING ASSY |
| C78003-52 | SLING HANDLE T/R ENGINE |
| C78004-1 | LOCKPIN EQPT |
| C78004-2 | PIN ASSY |
| C78005-21 | HAND PUMP |
| C78005-22 | PUMP ASSY |
| C78005-26 | HAND PUMP – OPENING SYSTEM, THRUST REVERSER |
| C78005-53 | HAND PUMP - OPENING SYSTEM，THRUST REVERSER |
| C78005-54 | TOOL |
| C78005-60 | TOOL |
| C78006-1 | ALIGMENT GUIDE CFM56-3 FWD ENG MOUNT |
| C78009-1 | REM/INSTL TOOL |
| C78009-19 | REM/INSTL TOOL |
| C78009-36 | TOOL |
| C78009-38 | REM/INSTL TOOL |
| C78009-39 | REM/INSTL TOOL |
| C78009-64 | STRAP ASSY |
| C78009-72 | REMOVE/INSTALL TOOL – PRIMARY EXHAUST ASSEMBLIES |
| C78009-88 | REMOVE/INSTALL TOOL - PRIMARY EXHAUST ASSYS |
| C78010-1 | LATCHING TOOL – THRUST REVERSER C-DUCT HALVES |
| C78011-37 | DOLLY EQPT |
| C78011-60 | DOLLY EQPT |
| C78011-78 | HYDR SYSTEM ASSY |
| C78012-14 | Hold Open Eqpt - Thrust Reverser - 737-300/400/500 |
| C78012-15 | TOOL |
| C78012-16 | TOOL |
| C78014-6 | WRENCH SET |
| C78014-9 | THREAD PROTECTOR |
| C78016-1 | LATCHING LEVER – THRUST REVERSER COWLING |
| C78017-1 | ALIGNMENT TOOL – LOWER AUXILIARY SLIDER, THRUST REVERSER TRANSLATING SLEEVE |
| C78018-1 | SLING EQPT |
| C78018-30 | 44200 Pin |
| C78018-47 | SLING EQPT |
| C78018-50 | SLING EQPT |
| C78018-51 | AFT HINGE FTG ASSY |
| C78018-6 | SPUD ASSY |
| C78018-65 | Web Connector |
| C78019-13 | TOOL |
| C78019-15 | HOLD OPEN EQPT |
| C78019-17 | CENTER BEAM ASSY |
| C78020-1 | T/R COWL LATCH TOOL |
| C78020-11 | LATCHING TOOL |
| C78020-14 | LATCHING TOOL |
| C78020-15 | LATCHING TOOL |
| C78021-1 | EQUIPMENT HOLD OPEN |
| C78022-1 | SLING EQUIPMENT - THRUST REVERSER SLEEVE |
| C78022-35 | SLING EQUIPMENT – THRUST REVERSER SLEEVE |
| C78023-1 | COLLAR EQPT |
| C78023-13 | LOCK ASSEMBLY – THRUST REVERSER ACTUATOR, CFM56-7 |
| C78023-15 | TOOL |
| C78023-2 | COLLAR ASSY |
| C78025-21 | ACTUATOR EQUIPMENT |
| C78025-30 | ACTUATOR INSTALLATION/REMOVAL |
| C78026-156 | TOOL |
| C78026-161 | BOOM HOIST – GROUND BASED REMOVAL/INSTALLATION |
| C78026-259 | BOOM HOIST-GROUND BASED RMVL/INSTL |
| C78028-1 | ALIGNMENT EQUIPMENT – UPPER AUXILIARY SLIDER, THRUST REVERSER TRANSLATING SLEEVE |
| C78030-1 | GAP MEASUREMENT GAUGE – THRUST REVERSER ACTUATOR SYSTEM LOCKING ACTUATOR |
| C78030-10 | GAP MEASUREMENT GAUGE - TRAS LOCKING ACTUATOR/ |
| C78031-1 | SLING EQPT - THRUSTREVERSER OPENING，CFMLEAP-1B ENGINE/LEAP-1B |
| C78032-1 | SLING EQPT-THRUST REVERSER ，CFM LEAP - 1 B ENGINE |
| C78033-1 | HOLD OPEN EQPT - THRUSTREVERSER，CFM LEAP-1BENGINE/LEAP-1B |
| C78033-40 | EQUIPMENT |
| C78034-1 | HOIST EQPT - THRUSTREVERSER SLEEVE, CFMLEAP-1B ENGINE/CFM LEAP |
| C78035-1 | OCK EQPT-THRUST REVERSEROPENING ACTUATORS，CFMLEAP-1B ENGINE/LEAP-1B |
| C78035-14 | 15°LOCK EQPT-THRUST REVERSER OPENING ACTUATORS，CFM LEAP-1B ENGINE |
| C78036-1 | STAND - STORAGE/WORK， CFM LEAP-1B THRUST REVERSER |
| C78039-1 | Removal Kit - Drag Link Bushing (Aircraft with titanium T/R inner walls only) |
| C78040-1 | Drive Socket – Thrust Reverser Sync Lock, Manual Dr |
| C78040-10 | TOOL |
| C78041-1 | TOOL |
| C78045-1 | TOOL |
| C79001-1 | TEST EQPT |
| CAL24LOT-JX | CIRCUIT BREAKER LOCKOUT WITH STEAMER |
| CFD1142-10-000 | TROLLEY-HANDLING,MLG |
| CFD1142-30-000 | TROLLEY-HANDLING,MLG |
| CFM56-3 | Engine stand |
| CFM56-5A/5B | TOOL |
| CFM56-5B | Engine stand |
| CFM56-7EngineStand | TOOL |
| CHA141382 | END FLOAT CHECKING GAGE |
| CHA141478 | BACKLASH CHECKING TOOL - FLAP SCREWJACKS 1 THRU 6 |
| CHS943 | SPECIAL SPANNER |
| COM-1529 | HAND PUMP TO REFURBISH IDG OR CSD OIL |
| COM-1781 | TOOL |
| COM-1818 | Dolly - Wheel/Brake Change） |
| COM-4046 | TIRE DEFLATOR SMALL BORE SCREW ON |
| CP25581 | BRACKET |
| CP30523 | TOOL |
| CP30810-2 | TOOL |
| CP30810-3 | TOOL |
| CPAM-532 | TOOL |
| CS-710 | TOOL |
| CS-710-144 | REMOVE/INSTALL TOOL |
| CTE3160 | CART - FUEL ACCESSOR |
| D17961-101 | LOCK PIN ASSY |
| D21852 | EXTRACTOR |
| D22333000 | PIN LOCK SAFETY MLG |
| D23080000 | GROUND SAFETY LOCK |
| D23156000 | PIN-SAFETY |
| D23304000 | PIN-LOCK GROUND |
| D2565800100000 | FLY AWAY SUIT CASE |
| D46034 | CASTELLATED WRENCH |
| D46073 | EXTRACTOR |
| D46074 | ADAPTER |
| D46216 | DUMMY PIN |
| D46217 | TOOL-INSERTION MG ACTUATING CYLINDER SHAFT |
| D46219 | EXTRACTOR |
| D46220 | EXTRACTOR |
| D46221 | EXTRACTOR |
| D46222 | EXTRACTOR |
| D46223 | EXTRACTOR |
| D46224 | EXTRACTOR |
| D46225 | EXTRACTOR |
| D46226 | EXTRACTOR |
| D46237 | SAFETY COLLAR-MLG |
| D46237-3 | PIN |
| D46242 | TOOL |
| D46347 | EXTRACTOR |
| D46360 | TOOL |
| D46485 | EXTRACTOR |
| D46486 | ADAPTER |
| D46493 | DRIVING BLANK |
| D46795 | JAWS-FALSE |
| D47584 | ADAPTOR |
| D47857 | PIN |
| D72684-111 | TOOL |
| D97B00-003 | ACTUATOR MECHANICAL |
| DAH602622 | TOOL |
| DAH602734 | MLG DOOR ACTUATOR，GROUNDLOCK SLEEVE |
| DAS34530 | SIZING DIE |
| DG-200 | TOOL |
| DH13PM | TOOL |
| DJ030-22211 | TOOL |
| D-PK-M05102 | TOOL |
| DRT67212 | SPANNER-NUT BOGIE |
| DRT68003 | COMPRESSOR - SPRING |
| DRT68006 | SPRING-EXPANDER |
| DRT68007 | TOOL |
| DRT68009 | GAG SIDE STAY |
| DRT68010 | SIDE STAY CLAMP |
| DRT68015 | TOOL |
| DRT68019 | GAG-BRAKE ROD |
| DRT68020 | TOOL |
| DRT68022 | TOOL |
| DRT68023 | GAG - SHOCK ABSORBER |
| DRT68031 | SLEEVE - GROUND LOCK |
| DRT68032 | TORQUE ADAPTOR |
| DRT68053 | RESTRAINT - BELLCRANK |
| DRT68177 | TOOL |
| DRT68191 | TOOL |
| DRT68210 | TOOL |
| DRT68211 | TOOL |
| DRT68216 | FIXTURE-LOAD |
| DRT68229 | TOOL |
| DRT68230 | GAG, SHOCK ABSORBER |
| DRT68237 | SPANNER - TORQUE |
| DRT68238 | FIXTURE - TORQUE |
| DRT68269 | TOOL |
| DRT68729 | SPANNER-UPPER CARDAN |
| DRT68817 | REACTOR-BOGIE,PIN |
| DRT68822 | ADAPTOR TORQUE |
| DRT68824 | TOOL |
| DRT68826 | TOOL |
| DRT68827 | TOOL |
| DRT68828 | TOOL |
| DRT68833 | SPANER-LOWER CARDAN |
| DRT68835 | TOOL |
| DRT68836 | GAG-SIDE STAY |
| DRT68837 | GAG-BRAKE ROD |
| DRT68838 | GAG-SHOCK ABSORBER |
| DRT68839 | GAG-BOGIE BEAM |
| DRT68840 | CLAMP SIDE STAY |
| DRT68841 | TOOL |
| DRT68842 | BELLCRANK RESTRAINT |
| DRT68860 | GUIDE CONE |
| DRT68861 | CONE GUIDE |
| DRT68862 | GUIDE CONE |
| DRT68864 | LOCK, STAY BRACE TOOL |
| DRT68865 | TO ASSEMBLY BOGIE PIVOT PIN |
| DRT68866 | GUIDE CONE |
| DRT68897 | LOCATION ASSY |
| DRT68920 | EXTRACTOR-PIN,R LINK |
| DRT68921 | TOOL |
| DRT68923 | GROUND LOCK SLEEVE |
| DRT68923-10 | TOOL |
| DRT68925 | RECOIL NUT SPANNER |
| DRT68930 | TOOL-GLAND ASSY |
| DRT68933 | POST-ASSEMBLY |
| DRT68934 | TOOL |
| DRT68935 | ADAPTOR - TORQUE |
| DRT68973 | ADAPTER, CHARGING - MLG |
| DRT69129 | BOGIE STOP PAD INSTALLATION TOOL |
| DRT69193 | TOOL |
| DRT69292 | TORQUE REACTOR |
| DRT69371 | PIN MLG A350 |
| DRT69426 | TOOL |
| DRT69434 | SPANNER - MLG AXLE NUT |
| DRT69437 | PROTECTOR - MLG WHEEL AXLE |
| DRT69510 | TOOL |
| DRT69512 | EXTRACTOR - ANTI ROTATION PIN |
| DRT69513 | PIN, BRAKE ROD PIN AND NUT |
| DRT69678 | SOCKET LWR CARDAN |
| DRT69679 | SOCKET UPR CARDAN |
| DRT69680 | LOWER CARDAN SOCKET |
| DRT69681 | UPPER CARDAN SOCKET |
| DRT69704 | 39MM FILL AND LEVEL STOP |
| DZZ0001-501 | TOOL |
| DZZ0006-15 | TOOL |
| DZZ0006-29 | TOOL |
| DZZ0006-509 | TOOL |
| DZZ0011-1 | TOOL |
| DZZ0014-1 | TOOL |
| DZZ0014-501 | TOOL |
| DZZ0017-501 | TOOL |
| DZZ7018-1 | TOOL |
| DZZ7029-1 | TOOL |
| DZZ7030-1 | TOOL |
| DZZ7030-1-GSE | TOOL |
| DZZ7044-1 | TOOL |
| DZZ7049-1 | TOOL |
| DZZ7050-1 | TOOL |
| DZZ7055-1 | TOOL |
| DZZ7074-1 | TOOL |
| DZZ7078-1-392 | TOOL |
| DZZ7084-1 | TOOL |
| DZZ7084-63 | TOOL |
| DZZ7089-1 | TOOL |
| DZZ7092-1 | TOOL |
| DZZ7108-1 | TOOL |
| DZZ7113-1 | TOOL |
| DZZ7130-1 | TOOL |
| DZZ7133-3 | TOOL |
| DZZ7133-5 | TOOL |
| DZZ7134-503 | TOOL |
| DZZ7134-507 | TOOL |
| DZZ7154-1 | Adapter-MLG axle nut torque |
| DZZ7157-503 | TOOL |
| DZZ7179-173 | TOOL |
| DZZ7179-199 | TOOL |
| DZZ7179-201 | TOOL |
| DZZ7187-1 | TOOL |
| DZZ7192-1 | TOOL |
| DZZ7195-1 | TOOL |
| DZZ7295-1 | TOOL |
| DZZ7295-501 | TOOL |
| DZZ7297-1 | TOOL |
| DZZ7308-1 | TOOL |
| DZZ7316-25 | TOOL |
| DZZ7316-3 | TOOL |
| DZZ7317-1 | TOOL |
| DZZ7323-1 | TOOL |
| DZZ7349-1 | TOOL |
| DZZ7356-1 | TOOL |
| DZZ7369-1-392 | TOOL |
| DZZ7369-501-392 | TOOL |
| DZZ7800-0/DZZ0014-1 | TOOL |
| E19-E2 tow bar | TOOL |
| E20000Z3-1 | SENSOR KEY TOOL |
| E2000Z3-1 | TOOL |
| E20998 | SENSOR KEY TOOL |
| E2J52362-1 | TOOL |
| E71516-00 | FIRING PIN RETRACTION PLIER |
| E82061-001 | TOOL |
| EMB00016-9 | TOOL |
| EMB-00016-009 | PLUMB - AIRCRAFT RIGGING |
| EMB-00053-001 | WRENCH - RECONNECT, AILERON/ELEVATOR CONTROLS |
| EMB-00068-001 | EXTRACTOR |
| EMB-00168-001 | GSE 080 - BOX - LEAKAGE TEST |
| EMB-00168-003 | BOX-LEAKAGE TEST |
| EMB-00222-002 | TOOL |
| EMB-00574-002 | HOSE - BLEEDING, WHEEL BRAKE |
| EMB-00976-001 | TOOL |
| EMB-00977-001 | TOOL |
| EMB-01163-003 | DUMMY FILTER ELIMENT |
| EMB-01548-012 | TOOL |
| EMB-01548-013 | TOOL |
| EMT320001 | MLG PINTLE PIN |
| ES750-51 | GAUGE-ENDPIECE |
| ES750-53 | GAUGE ASSY |
| ES750-57 | PDU ROLLER WEAR GAUGE |
| ES750-99 | GAUGE |
| F0003210000000 | TOOL |
| F1402369 | EXTRACTING TOOL |
| F21949 | ADJUSTING PIN |
| F26516000 | INSTALLATION TOOL |
| F26526000 | TOOL |
| F26527000 | TOOL - TIRE & WHEEL ASSEMBLE |
| F26529000-1 | INSTALLATION TOOL FOR BEARING CUP |
| F26588000 | TOOL |
| F26610000 | TOOL |
| F26616000 | TEST TOOL - FUSE PLUGS |
| F26618000 | HALF WHEEL BALANCING |
| F26630200 | TOOL |
| F26691000 | TOOL FOR PISTON |
| F26691000-1 | TOOL |
| F26692000 | INSTALLATION TOOL |
| F26693000 | COMPRESSION TOOL |
| F26756100 | TOOL |
| F26786000 | REMOVAL TOOL FOR BEARING CUP |
| F26792000 | TOOL |
| F26792000-1 | TESTER |
| F27220000 | HOISTING DEVICE |
| F27531000 | TOOL |
| F27532000 | TOOL |
| F27533000 | TOOL REMOVAL |
| F27534100 | TOOL |
| F27535000 | TOOL |
| F27537000 | TOOL REMOVAL MLG BEARING |
| F2753700-1 | TOOL |
| F27539000 | TOOL |
| F27701000 | TOOL |
| F27871000 | TOOL |
| F27872000 | TOOL |
| F27873000 | TOOL |
| F27874000 | TOOL |
| F27877000 | TOOL |
| F27878000 | TOOL |
| F27988000 | EXTRACTOR - SIU |
| F2800600 | TOOL |
| F28006000 | DISK |
| F28164000 | TOOL |
| F28183000 | DRILLING TOOL |
| F46753-1000 | TOOL |
| F46753-1000 | TOOL |
| F46754-100 | TOOL |
| F467541000 | PROTECTOR |
| F46754-1000 | PROTECTOR |
| F47127 | TOOL |
| F52485-500 | PROTRACTOR ASSEMBLY – AIRPLANE CONTROL SURFACES |
| F70038 | WRENCH ASSY |
| F70043 | GAUGE ASSEMBLY – AIRPLANE ATTITUDE |
| F70085 | WRENCH-SPANNER,BEARING RETAINER NUT |
| F70167-1 | ASSEMBLY JIG – STABILIZER TRIM ACTUATOR |
| F70199-1 | INFLATION TOOL |
| F70199-13 | INFLATION TOOL |
| F70199-15 | VALVE COVER |
| F70199-18 | INFLATION TOOL |
| F70199-19 | INFLATION TOOL |
| F70199-1G | TOOL |
| F70199-2 | TOOL |
| F70199-20 | INFLATION TOOL |
| F70199-24 | INFLATION TOOL |
| F70199-25 | TIRE PRESSURE GAUGE |
| F70199-26 | INFLATION TOOL |
| F70199-27 | PRESSURE GAUGE ASSY |
| F70199-2G | Inflation Tool |
| F70199-35 | TOOL |
| F70199-52 | INFLATION TOOL |
| F70199-53 | INFLATION TOOL |
| F70199-6 | AIR CHUCK |
| F70200-1 | INFLATION TOOL |
| F70200-10 | TOOL |
| F70200-11 | TOOL |
| F70200-14 | INFLATION TOOL |
| F70200-15 | HOSE ASSY |
| F70200-16 | TOOL |
| F70200-17 | INFLATION TOOL |
| F70200-18 | INFLATION TOOL |
| F70200-19 | INFLATION TOOL ASSY |
| F70200-1G | TOOL |
| F70200-2 | TOOL |
| F70200-20 | INFLATION TOOL ASSY |
| F70200-3 | TOOL |
| F70200-35 | INFLATION TOOL-STRUT |
| F70200-36 | TOOL |
| F70200-4 | NEEDLE VALVE |
| F70200-5 | HOSE ASSY |
| F70200-6 | TOOL |
| F70200-7 | TOOL |
| F70200-8 | TOOL |
| F70200-9 | TOOL |
| F70206-1 | ADAPTER ASSEMBLY – HOLLOW BOLT, FUEL LEAK TRACING |
| F70207-1 | KIT-RIGGING PIN |
| F70207-101 | RIGGING PIN ASSY |
| F70207-109 | KIT-RIGGING PIN |
| F70207-113 | RIGGING PIN ASSY |
| F70207-114 | RIGGING PIN ASSY |
| F70207-115 | RIGGING PIN ASSY |
| F70207-116 | RIGGING PIN ASSY |
| F70207-117 | RIGGING PIN ASSY |
| F70207-128 | KIT-RIGGING PIN |
| F70207-129 | RIGGING PIN ASSY |
| F70207-139 | KIT-RIGGING PIN |
| F70207-14 | RIGGING PIN ASSY |
| F70207-151 | KIT - RIGGING PIN |
| F70207-152 | TOOL |
| F70207-23 | RIGGING PIN ASSY |
| F70207-4 | RIGGING PIN ASSY |
| F70207-66 | RIGGING PIN ASSY |
| F70207-7 | RIGGING PIN ASSY |
| F70207-8 | RIGGING PIN ASSY |
| F70207-85 | RIGGING PIN ASSY |
| F70207-88 | RIGGING PIN ASSY |
| F70207-9 | RIGGING PIN ASSY |
| F70230-1 | TEMPORARY REPAIR TOOL – SELF-SEALING RIVETS, FUEL SYSTEM |
| F70230-3 | TOOL |
| F70250-36 | LIFTING FIXTURE ASSEMBLY – MAIN CARGO DOOR |
| F70258 | PERSONNEL SAFETY BARRIER-CARGO DOOR |
| F70258-1 | NET-ASSY OF |
| F70263-1 | LOCK ASSEMBLY – NOSE LANDING GEAR OLEO |
| F70284-1 | WEAR GAGE SET |
| F70284-2 | WEAR GAGE |
| F70300-1 | ADAPTER - FLAP DRIVE |
| F70312 | KIT-CROWFOOT WRENCHES |
| F70312-1 | WRENCHES |
| F70312-22 | KIT - CROWFOOT WRENCHES |
| F70312-26 | CROWFOOT WRENCH |
| F70312-27 | WRENCH-CROWFOOT |
| F70312-28 | WRENCH-CROWFOOT |
| F70312-3 | KIT – CROWFOOT WRENCHES |
| F70312-30 | WRENCH-CROWFOOT |
| F70312-32 | WRENCH-CROWFOOT |
| F70312-34 | WRENCH-CROWFOOT |
| F70312-38 | WRENCH-CROWFOOT |
| F70312-4 | KIT – CROWFOOT WRENCHES |
| F70312-45 | WRENCH-CROWFOOT |
| F70312-46 | WRENCH-CROWFOOT |
| F70312-47 | WRENCH-CROWFOOT |
| F70312-48 | WRENCH-CROWFOOT |
| F70312-50 | WRENCH-CROWFOOT |
| F70312-51 | WRENCH-CROWFOOT |
| F70312-52 | WRENCH-CROWFOOT |
| F70313-2 | STANDARD BOX – SUPPORT EQUIPMENT |
| F70313-4 | STANDARD BOX – SUPPORT EQUIPMENT |
| F70321-10 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-11 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-12 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-13 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-14 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-15 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-16 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-17 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-18 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-19 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-20 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-32 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-34 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-8 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70321-9 | INSTALLATION MANDREL – SHRINK FIT BUSHING |
| F70326-1 | TORQUE WRENCH ADAPTER – MANUAL STABILIZER TRIM WHEEL |
| F70328-1 | PROBE – FILM RESISTANCE MEASURING |
| F70330-1 | STATIC BAL EQPT |
| F70330-125 | STATIC BALANCE EQUIPMENT – CONTROL SURFACES |
| F70330-126 | STATIC BALANCE EQUIPMENT – CONTROL SURFACES |
| F70330-3 | STATIC BALANCE EQUIPMENT – CONTROL SURFACES |
| F70330-4 | STATIC BALANCE EQUIPMENT – CONTROL SURFACES |
| F70333-24 | ADAPTER ASSY |
| F70333-25 | ADAPTER ASSY |
| F70336-1 | SPANNER WRENCH |
| F70336-4 | TOOL |
| F70339-43 | TEST EQUIPMENT – DOOR SNUBBER EXTENSION AND RETRACTION |
| F71252 | ADAPTER – 16/32-INCH SPLINE, 3/4-INCH MALE HEX |
| F71267 | WRENCH ASSEMBLY - PINION GEAR |
| F71290-1 | WRENCH – SPANNER, BEARING RETAINER NUT |
| F71290-7 | WRENCH – SPANNER, BEARING RETAINER NUT |
| F71291-500 | COMPRESSOR – ACTUATOR SPRING, STABILIZER TRIM |
| F71292-17 | Protractor base kit-control surface |
| F71313-31 | WRENCH – SOCKET, ROD END BEARING |
| F71313-33 | WRENCH – SOCKET, ROD END BEARING |
| F71313-35 | WRENCH – SOCKET, ROD END BEARING |
| F71313-36 | WRENCH – SOCKET, ROD END BEARING |
| F71313-37 | WRENCH – SOCKET, ROD END BEARING |
| F71313-41 | WRENCH – SOCKET, ROD END BEARING |
| F71313-44 | WRENCH – SOCKET, ROD END BEARING |
| F71313-47 | WRENCH – SOCKET, ROD END BEARING |
| F71313-48 | WRENCH – SOCKET, ROD END BEARING |
| F71313-51 | WRENCH – SOCKET, ROD END BEARING |
| F71313-52 | WRENCH – SOCKET, ROD END BEARING |
| F71313-55 | WRENCH – SOCKET, ROD END BEARING |
| F71313-6 | WRENCH – SOCKET, ROD END BEARING |
| F71313-7 | WRENCH – SOCKET, ROD END BEARING |
| F71313-8 | WRENCH – SOCKET, ROD END BEARING |
| F71329 | LEAKAGE TRACING DEVICE-INTEGRAL TANK LEAKAGE TEST |
| F71336-500 | LOCK ASSEMBLY – STABILIZER TRIM |
| F71336-501 | LOCK ASSEMBLY-STABILIZER TRIM |
| F72701-34 | END GUIDE |
| F72701-35 | THREADED SPACER |
| F72701-36 | BOLT GUIDE |
| F72701-37 | ALIGNMENT PIN |
| F72701-38 | ALIGNMENT PIN |
| F72719-5 | TOWING EYE BOLT ASSEMBLY – MAIN GEAR |
| F72719-500 | EYE BOLT ASSY-TOWING |
| F72719-6 | SPACER |
| F72719-8 | MLG TOWING |
| F72735 | LOCK ASSY |
| F72735-1 | PIN |
| F72735-13 | PIN-STEERING |
| F72735-3 | CABLE |
| F72735-4 | PIN SAFETY TOW NLG |
| F72756 | SPANNER |
| F72767-3 | Wrench-spanner,gland nut,MLG |
| F72790 | PROTRACTOR MOUNT ASSY- PILOTS & COPILOTS CONTROL WHEEL |
| F72823-36 | TOOL |
| F72823-40 | TEST EQUIP-STATIC PT TEMP SENS. |
| F72867-1 | Adapter Assy，Control Wheel, Torque & Force Test |
| F72880-4 | THREAD PROTECTOR – LANDING GEAR AXLE |
| F72913-10 | AXLE & THD PROTECTION SET-737 MAIN GEAR |
| F72913-11 | THREAD PROTECTOR |
| F72913-13 | AXLE & THD PROTECTION SET-737 MAIN & NOSE GEAR |
| F72913-14 | MLG THREAD PROTECTOR-UNDERSIZED |
| F72913-15 | NLG THREAD PROTECTOR-UNDERSIZED |
| F72913-6 | THREAD PROTECTOR |
| F72913-8 | AXLE PROTECTOR |
| F72918-1 | DUMMY TEST RELIEF VALVE – MODULAR SYSTEM |
| F72924-1 | HOLDER – STABILIZER TRIM JACKSCREW BALLNUT AND SCREW ASSEMBLY |
| F72928-111 | TOOL |
| F72928-18 | HOSE ASSY |
| F72928-33 | PRESSURE REGULATOR |
| F72928-52 | PRESSURE REGULATOR |
| F72928-55 | TEST BOX ASSY |
| F72928-58 | PRESSURE REGULATOR |
| F72928-59 | AIR REGULATOR HOSE ASSY |
| F72928-63 | PRESSURE REGULATOR |
| F72942-1 | LUBRICATION SET - ENTRY,CARGO,SERVICE,AND GALLEY DOOR CAMSHAFT BEARINGS |
| F72949-1 | TOOL – 727/737 FUEL DRIPSTICK OPERATING |
| F72950-138 | APU ADAPTOR & CART SET-MODEL 737 |
| F72950-139 | APU ADAPTOR STAND-MODEL 737 |
| F72950-158 | TRANSPORTATION CART |
| F72950-3 | TRANSPORTATION CART |
| F72951-1 | MANOMETER |
| F72952-1 | TOOL |
| F72952-14 | ADAPTER SET – PROTRACTOR, FORWARD THRUST LEVER |
| F72952-15 | ADAPTER SET – PROTRACTOR, FORWARD THRUST LEVER |
| F72952-2 | CONTROL SURFACE PROTRACTOR THRUST LEVER ADAPTER |
| F72959-10 | SPANNER WRENCH |
| F72959-31 | WRENCH ASSY |
| F72959-32 | WRENCH ASSY |
| F72959-33 | WRENCH ASSY |
| F72959-34 | WRENCH ASSY |
| F72959-35 | SPANNER WRENCH – AN STANDARD TYPE |
| F72959-36 | WRENCH ASSY |
| F72959-37 | WRENCH ASSY |
| F72959-38 | WRENCH ASSY |
| F72959-39 | WRENCH ASSY |
| F72959-40 | WRENCH ASSY |
| F72959-41 | WRENCH ASSY |
| F72959-42 | WRENCH ASSY |
| F72959-9 | SPANNER WRENCH – AN STANDARD TYPE |
| F72977-26 | ADAPTER EXT ASSY |
| F72977-44 | GAUGE EQUIPMENT – HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING |
| F72977-45 | GAGE EQPT |
| F72977-46 | GAGE EQPT |
| F72977-47 | GAGE EQPT |
| F72977-62 | GAGE EQPT |
| F72977-64 | ADAPTER ASSY |
| F72988-7 | BEAM ASSY |
| F72995-1 | DRAIN ASSY |
| F80000-6 | TOOL |
| F80000-7 | ADAPTER ASSY |
| F80001-1 | JACK PAD ASSY |
| F80002-1 | CRADLE AND HOISTING ASSEMBLY – AUXILIARY POWER UNIT (APU) |
| F80002-24 | CRADLE AND HOISTING ASSEMBLY – AUXILIARY POWER UNIT (APU) |
| F80006-2 | CABLE ASSY |
| F80006-51 | SLING ASSY |
| F80006-52 | SLING ASSY |
| F80006-54 | SLING ASSY |
| F80006-56 | 3-DROP CABLE ASSY |
| F80006-67 | SLING ASSY |
| F80011-1 | CRADLE ADAPTER ASSEMBLY – AC GENERATOR AND CONSTANT SPEED DRIVE |
| F80012-1 | ADAPTOR ASSY PIN SPANNER |
| F80013-1 | ADAPTER ASSEMBLY – PIN SPANNER |
| F80014-16 | STAB.JACKSCREW-HOIST ADAPTER |
| F80014-2 | STAB.JACKSCREW-HOIST ADAPTER |
| F80016-19 | LOCK ASSEMBLY – OLEO, MAIN GEAR |
| F80017-1 | LOCK ASSEMBLY – GROUND/FLIGHT SPOILERS |
| F80017-19 | LOCK ASSEMBLY |
| F80017-23 | LOCK |
| F80017-33 | LOCK ASSY-SPOILER |
| F80018-1 | SPANNER WRENCH |
| F80018-2 | SPANNER WRENCH |
| F80020-5 | ADAPTER WRENCH |
| F800234-1 | TOOL |
| F80025-30 | SLING ASSY |
| F80027-13 | HORIZONTAL STABILIZER LOCK ASSEMBLY |
| F80027-18 | LOCK EQPT |
| F80027-33 | TOOL |
| F80027-41 | LOCK EQPT-HORIZONTAL STABILIZER |
| F80027-44 | TOOL |
| F80033-1 | WRENCH ASSY |
| F80033-4 | WRENCH ASSY |
| F80033-8 | WRENCH ASSY |
| F80035-18 | SLING ASSEMBLY – VERTICAL TAIL |
| F80039-1 | HOIST ASSEMBLY -AUXILIARY POWER UNIT |
| F80039-43 | HOIST EQUIPMENT - APU |
| F80040-15 | LOCK ASSEMBLY, GROUND SPOILER ACTUATOR |
| F80040-2 | Spoiler Ground Lock |
| F80048-58 | LOCK ASSEMBLY – LEADING EDGE FLAP AND SLAT ACTUATORS |
| F80048-59 | LOCK ASSEMBLY – LEADING EDGE FLAP AND SLAT ACTUATORS |
| F80048-60 | LOCK ASSEMBLY – LEADING EDGE FLAP AND SLAT ACTUATORS |
| F80048-84 | LOCK ASSEMBLY – LEADING EDGE FLAP AND SLAT ACTUATORS |
| F80048-89 | LOCK ASSEMBLY – LEADING EDGE FLAP AND SLAT ACTUATORS |
| F80048-90 | LOCK ASSEMBLY – LEADING EDGE FLAP AND SLAT ACTUATORS |
| F80048-95 | LOCK ASSEMBLY – LEADING EDGE FLAP AND SLAT ACTUATORS |
| F80049-1 | TOOL |
| F80049-17 | LOCK ASSY |
| F80049-2 | Lock Assembly - Flight Controls |
| F80049-31 | LOCK ASSY |
| F80049-46 | LOCK ASSY |
| F80049-56 | LOCK ASSY |
| F80049-57 | GUARD ASSY |
| F80049-65 | LOCK ASSY |
| F80049-66 | LOCK ASSEMBLY – FLIGHT CONTROLS |
| F80049-67 | GUARD ASSY |
| F80051-1 | WRENCH ADAPTER – FACE SPANNER LUG |
| F80053-1 | WRENCH ASSEMBLY – FACE SPANNER, LUG |
| F80055-1 | TRAMMEL BAR ASSY |
| F80055-10 | TRAMMEL BAR ASSEMBLY |
| F80055-36 | TOOL |
| F80056-1 | PLUG SET – NOSE WHEEL STEERING CYLINDER |
| F80057-1 | SUPPORT ASSEMBLY – FLAP DRIVE SCREW |
| F80060-2 | JACKING ADAPTER |
| F80060-6 | JACKING ADAPTER ASSY |
| F80060-7 | ADAPTER |
| F80063-501 | FIXTURE – ELEVATOR RIGGING AND RESTRAINING |
| F80068-27 | SUPPORT ASSEMBLY – AFT FUSELAGE JACKING POINT |
| F80080-128 | FUEL TANKS & VENT SYS TESTING KIT |
| F80080-129 | FUEL TANKS & VENT SYS TESTING KIT |
| F80096-4 | HOLDING FIXTURE – FORWARD TRUNNION BEARING HOUSING, MAIN GEAR |
| F80096-7 | HOLDING FIXTURE – FORWARD TRUNNION BEARING HOUSING, MAIN GEAR |
| F80106-1 | WRENCH – LUG SPANNER |
| F80106-2 | WRENCH – LUG SPANNER |
| F80109-3 | LOCK ASSEMBLY – THRUST REVERSER ISOLATION VALVE |
| F80109-9 | LOCK ASSEMBLY – THRUST REVERSER ISOLATION VALVE |
| F80113-10 | Body |
| F80113-105 | ROLLER SWAGE KIT |
| F80113-106 | BODY ASSY |
| F80113-107 | BODY ASSY |
| F80113-108 | ROLLER |
| F80113-109 | ANVIL |
| F80113-113 | NUT |
| F80113-15 | PILOT |
| F80113-16 | PILOT |
| F80113-18 | PILOT |
| F80113-2 | BODY ASSY |
| F80113-23 | PILOT |
| F80113-24 | PILOT |
| F80113-26 | PILOT |
| F80113-27 | SPACER |
| F80113-28 | ROLLER |
| F80113-30 | ANVIL |
| F80113-36 | ROLLER |
| F80113-37 | ROLLER SWAGE KIT |
| F80113-4 | BODY ASSY |
| F80113-5 | BODY ASSY |
| F80113-50 | ROLLER SWAGE KIT |
| F80113-53 | BODY ASSY |
| F80113-56 | ANVIL |
| F80113-60 | SPACER |
| F80113-64 | ROLLER SWAGE KIT |
| F80114-1 | TOOL |
| F80114-25 | TOOL |
| F80114-34 | HOIST EQPT |
| F80114-35 | HOIST EQPT |
| F80114-82 | HOIST EQPT |
| F80114-84 | CRADLE ASSY |
| F80115-1 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR |
| F80115-10 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR |
| F80115-11 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR |
| F80115-12 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR |
| f80115-13 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR |
| F80115-14 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR |
| F80115-16 | THREAD PROTECTOR |
| F80115-17 | THREAD PROTECTOR |
| F80115-2 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR |
| F80115-3 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR |
| F80115-8 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR |
| F80116-11 | TOOL |
| F80116-12 | TOOL |
| F80116-13 | TOOL |
| F80116-16 | TOOL |
| F80117-1 | ROLLER SEAGE ASSY |
| F80117-10 | ROLLER SEAGE EQPT |
| F80118-1 | SLEEVE SWAGE KIT |
| F80118-15 | SLEEVE SWAGE KIT |
| F80118-27 | KIT – BEARING RETENTION/REMOVAL |
| F80118-31 | SLEEVE SWAGE KIT |
| F80118-38 | SWAGE & REMOVAL KIT |
| F80118-42 | SWAGE & REMOVAL KIT |
| F80122-12 | ADAPTER EQUIPMENT – TORQUE WRENCH, FLAP DRIVE TRANSMISSION |
| F80122-14 | ADAPTER EQUIPMENT – TORQUE WRENCH, FLAP DRIVE TRANSMISSION |
| F80122-15 | ADAPTER EQUIPMENT – TORQUE WRENCH, FLAP DRIVE TRANSMISSION |
| F80122-16 | ADAPTER EQUIPMENT – TORQUE WRENCH, FLAP DRIVE TRANSMISSION |
| F80126-9 | PULLER EQPT |
| F80135-13 | CABLE ASSEMBLY – HYDRAULIC LEAKAGE CHECK |
| F80140-1 | TOOL REMOVAL |
| F80141-1 | THREAD PROTECTOR AND PIN ALIGNMENT – 737 MAIN LANDING GEAR |
| F80145-4 | Door Assembly - Purging, Center Integral Wing Fuel Tank |
| F80150-1 | LOCK – RUDDER, POWER CONTROL UNIT REMOVED |
| F80153-1 | PIN ASSY |
| F80158-17 | N.G. TRUNNION PIN & BEARING PULLER SET |
| F80162-1 | CLAMP – NOSE GEAR STEERING ACTUATOR ROD |
| F80164-35 | AUXILIARY POWER UNIT AIR INLET SCREEN |
| F80166-1 | TEST FIXTURE – PRESSURE RELIEF VALVE, FLAME ARRESTOR SURGE TANK |
| F80167-1 | LUBRICATION TOOL SET – TRAILING EDGE FLAP CARRIAGE ROLLER |
| F80167-13 | LUBRICATION TOOL SET – TRAILING EDGE FLAP CARRIAGE ROLLER |
| F80168-1 | SOCKET,NOSE GEAR |
| F80168-2 | SOCKET,MAIN GEAR |
| F80168-3 | SOCKET – AXLE NUT |
| F80169-1 | EXPANDER SET |
| F80176-1 | TORQUE WRENCH ADAPTER – MAIN LANDING GEAR TRUNNION, AFT BEARING NUT |
| F80176-8 | TORQUE WRENCH ADAPTER – MAIN LANDING GEAR TRUNNION, AFT BEARING NUT |
| F80177-14 | BOLT REMOVAL EQUIPMENT – HORIZONTAL STABILIZER |
| F80178-1 | SETTING TOOL – FORWARD ENTRY DOOR LATCH ROLLER |
| F80179-1 | TOOL ADJUST LIGHT RETRACTABLE |
| F80183-1 | THREAD PROTECTOR – CENTER SECTION, HORIZONTAL STABILIZER HINGE PIN INSTALLATION |
| F80185-4 | FITTING-AIRPLANE TIEDOWN |
| F80188-17 | SLING – HANDLING, AUXILIARY POWER UNIT (APU) |
| F80195-1 | DOWEL SET – THRUST LEVER CONTROL STAND |
| F80197-5 | WRENCH SET – LIMIT SWITCH, FLAP CONTROL UNIT |
| F80198-12 | GAGU ASSY |
| F80198-13 | GAGU ASSY |
| F80198-14 | GAGU ASSY |
| F80198-15 | GAGU ASSY |
| F80201-1 | DRAIN TOOL - FUEL SUMP/B737 |
| F80209-1 | RIGGING BEAM - FLAPS |
| F80209-2 | BEAM RIG FLAP OUTBD |
| F80212-19 | TOOL |
| F80212-30 | ADAPTER-RUDDER PENAL FORCE CHECK |
| F80213-46 | SLING |
| F80213-73 | INBD SLING EQPT |
| F80213-78 | OUTBD SLING EQPT |
| F80213-79 | CRADLE,INNER |
| F80213-80 | CRADLE,OUTER |
| F80213-82 | STRAP/BUCKLE ASSY |
| F80213-83 | STRAP/BUCKLE ASSY |
| F80219-46 | LOAD INDICATING SYSTEM – ENGINE INSTALLATION EQUIPMENT |
| F80222-1 | PROTRACTOR ASSY,AILERON TAB |
| F80222-11 | PROTRACTOR-AILERON TAB ALLIGNMENT |
| F80226-1 | FITTING ASSEMBLY – NOSE MOORING |
| F80226-3 | FITTING ASSEMBLY – NOSE MOORING |
| F80229-15 | TEST EQUIPMENT – FIRE EXTINGUISHING SYSTEM |
| F80229-52 | SHORTING PLUG ASSY |
| F80229-59 | ADAPTER CABLE ASSY |
| F80229-61 | ADAPTER CABLE ASSY |
| F80229-69 | TEST EQUIPMENT FIRE EXTINGUISHER |
| F80230-1 | RIGGING BEAM – ELEVATOR INDEX PLATE INSTALLATION |
| F80234-1 | LOCK ASSEMBLY – MAIN LANDING GEAR SHOCK STRUT |
| F80239-21 | SAFETY LANYARD PERSONNEL，ENGINE MAINTENANCE |
| F80239-22 | SAFETY LANYARD – PERSONNEL, ENGINE MAINTENANCE |
| F80239-25 | SAFETY LANYARD – PERSONNEL, ENGINE MAINTENANCE |
| F80241-17 | Restraint - Tethering, Aft Doors ***Recovery*** |
| F80248-8 | RIGGING FIXTURE – ELEVATOR TAB |
| F80249-7 | TORQUE SOCKET – BALL NUT/SCREW ASSEMBLY, STABILIZER TRIM |
| F80255-11 | ALIGNMENT & GUIDE PINS |
| F80255-12 | ALIGNMENT AND GUIDE EQUIPMENT – HORIZONTAL STABILIZER INSTALLATION AND REMOVAL |
| F80257-1 | WRENCH, BOX END, RATCHET – AFT CONE BOLT |
| F80263 | TOOL |
| F80263-1 | HOLDING FIXTURE – PISTON, LEADING EDGE SLAT ACTUATOR |
| FE171901 | TOOL |
| FE374120000 | PIN |
| FH01-20-26 | TOOL |
| FIL3300 | OIL MIGRATION TOOL |
| FIL567EB | TOOL |
| FIL567EB+FIL567EC | TOOL |
| FIL567EC | TOOL |
| FIL8100B | TOOL |
| FIL8100B6-250 | TROLLEY R I TROLLEY |
| FIL8200 | NLG Handling Trolley |
| FIL8300 | TOOL |
| FIL8400A | TOOL |
| FILJYT-5P | TOOL |
| FK24273 | COVER-COMMON NOZZLE ASSEMBLY |
| FME65-73761 | HOLDING FIXTURE MAIN LANDING GEAR |
| FME65B80713-1 | STAND ASSEMBLY – HORIZONTAL STABILIZER ACTUATOR |
| FPS-001 | TOOL |
| FRDH141 | ADAPTER-TORQUE |
| FRH100014A | FUEL LOW PRESS |
| FTC-102 | COVER - PROTECTIVE TAT PROBE |
| G07002-1 | JACKING BAR EQUIPMENT – MAIN LANDING GEAR AXLE |
| G07005-1 | ADAPTER ASSEMBLY, AIRCRAFT JACKING – POINTS IV AND V |
| G12001-12 | RIG PIN ASSY |
| G12001-4 | RIG PIN ASSY |
| G12001-47 | RIGGING PIN KIT |
| G12001-50 | RIGGING PIN KIT |
| G12001-6 | RIG PIN ASSY |
| G12001-60 | RIGGING PIN KIT |
| G20004-15 | STAKING EQUIPMENT – BODY LANDING GEAR AND WING LANDING GEAR, RETRACT ACTUATOR, ROD END AND HEAD END |
| G20008-6 | TOOL |
| G20011-1 | ATTACH FITTING SET |
| G20011-6 | LOCK ASSY |
| G20015-1 | WRENCH – SPANNER, SAFETY LANYARD, TIE DOWN LOCKS |
| G21001-11 | LOCKOUT,SWITCH |
| G21003-1 | PROBE-STATIC PRESSURE |
| G21003-2 | GAGE ASSY |
| G21004-1 | VACUUM HARNESS – CABIN PRESSURE CONTROLLER |
| G21007-1 | AIR FLOW CUP ASSY |
| G21009-57 | ADAPTER EQUIPMENT – HEAT EXCHANGER/PLENUM |
| G24004-70 | HOIST EQUIPEMNT |
| G24006-1 | SUPPORT HOOK - ENGINE POWER FEED CABLE，PW 4000 ENGINES |
| G24012-1 | HOIST ADAPTER - IDG |
| G24014-60 | HOIST EQUIPMENT – APU BATTERY |
| G24015-1 | DISPATCH EQUIPMENT – APU GENERATOR BLANKING PLATE |
| G25009-29 | HANDLING EQUIPMENT |
| G25012-8 | WRENCH KIT |
| G25016-1 | SLING EQUIPMENT – SLIDE REMOVAL, STRETCHED UPPER DECK |
| G26001-161 | TEST EQUIPMENT – FIRE EXTINGUISHING SYSTEM |
| G26001-166 | TEST EQUIPMENT – FIRE EXTINGUISHING SYSTEM |
| G26001-167 | TEST EQUIPMENT – FIRE EXTINGUISHING SYSTEM |
| G26001-168 | TEST EQUIPMENT – FIRE EXTINGUISHING SYSTEM |
| G26001-72 | ADAPTER CABLE |
| G26001-91 | TEST EQUIPMENT – FIRE EXTINGUISHING SYSTEM |
| G26002-42 | INSTALLATION/REMOVAL EQUIPMENT – FIRE EXTINGUISHER BOTTLE |
| G26005-10 | TOOL |
| G26005-13 | ADAPTER - HOT WIRE ANEMOMETER |
| G26005-14 | TOOL |
| G26005-17 | ADAPTER - HOT WIRE ANEMOMETER |
| G26005-24 | Adapter-hot wire anemometer |
| G26005-28 | TOOL |
| G26005-9 | ADAPTER - HOT WIRE ANEMOMETER |
| G26006-61 | CLEANING EQPT - SMOKEDETECTION SYSTEM |
| G26008-13 | TEST EQUIPMENT – NON-METERED DISCHARGE TUBING, CARGO FIRE EXTINGUISHER |
| G26009-130 | PLUG KIT |
| G26009-87 | TEST GAUGE/REGULATOR |
| G26009-88 | PLUG KIT |
| G26009-89 | PLUG KIT |
| G26010-176 | INSTALLATION/REMOVAL EQUIPMENT – FIRE EXTINGUISHER BOTTLE |
| G26097-1 | TOOL |
| G27001-1 | LOCK OPEN EQUIPMENT – INBOARD SPOILER ACTUATOR NUMBER 5 AND NUMBER 8 |
| G27002-1 | LOCK OPEN EQUIPMENT – INBOARD SPOILER ACTUATOR NUMBER 6 AND NUMBER 7 |
| G27008-19 | LOCK EQUIPMENT – RUDDER ACTUATOR |
| G27010-25 | SLING ASSEMBLY, LOWER RUDDER INSTALLATION AND REMOVAL |
| G27012-44 | SLING EQUIPMENT – UPPER RUDDER |
| G27013-9 | RIGGING SET – INBOARD KRUEGER FLAP NUMBERS 11 THRU 16 |
| G27016-68 | HOIST FRAME EQPT |
| G27016-69 | HOIST FRAME EQPT |
| G27017-1 | BAR – RIGGING, FLAP TRACK FAIRING, NO. 1 AND NO. 8 DOOR |
| G27023-1 | TEST EQUIPMENT – FREEPLAY, FLIGHT CONTROLS |
| G27023-124 | TEST EQUIPMENT – FREEPLAY, FLIGHT CONTROLS |
| G27023-125 | TEST EQUIPMENT – FREEPLAY, FLIGHT CONTROLS |
| G27023-126 | TEST EQUIPMENT – FREEPLAY, FLIGHT CONTROLS |
| G27023-136 | TEST EQUIPMENT – FREEPLAY, FLIGHT CONTROLS |
| G27030-1 | TORQUE ADAPTER – HORIZONTAL STABILIZER ACTUATOR |
| G27032-8 | ACTUATOR LOCK - OUTBOARDSPOILER |
| G27033-2 | ADAPTER CABLE – OUTBOARD AILERON LOCKOUT |
| G27034-1 | SPLINE ADAPTER – ANGLE GEARBOX DRIVE, INBOARD TRAILING EDGE FLAP |
| G27035-1 | SLING EQPT |
| G27036-186 | MEASURING EQUIPMENT – HORIZONTAL STABILIZER HINGE BEARING FREE PLAY |
| G27036-66 | SCREW ASSY |
| G27036-74 | MEASURING EQPT |
| G27037-13 | LOCK EQPT |
| G27037-21 | LOCK EQPT |
| G27040-1 | PERSONNEL LANYARD EQUIPMENT – WING |
| G27043-208 | HANDLING EQUIPMENT – HORIZONTAL STABILIZER ACTUATOR |
| G27043-209 | HANDLING EQUIPMENT – HORIZONTAL STABILIZER ACTUATOR |
| G27043-210 | HANDLING EQUIPMENT – HORIZONTAL STABILIZER ACTUATOR |
| G27047-54 | SLING EQPT |
| G27048-1 | TEST EQUIPMENT – INBOARD ELEVATOR ACTUATOR |
| G27049-74 | REM/INSTL EQPT -OUTBOARD T.E.FLAP/B747-8 |
| G27052-135 | HANDLING KIT - INBOARD T.E. FLAP/B747-8 |
| G27057-1 | HOLD OPEN LOCK – INBOARD SPOILER ACTUATOR |
| G27060-1 | SLING EQUIPMENT – REMOVAL/INSTALLATION, OUTBOARD AILERON |
| G27063-76 | INBD LOCK EQPT - TEFLAPS AND CARRIAGES |
| G27064-31 | ADAPTER - TE FLAP ACTUATOR，REMOVAL/INSTALLATION，TRACK 1,2,3,&6,7,8 |
| G27067-1 | FIXTURE EQPT |
| G27067-2 | FIXTURE EQPT |
| G27067-80 | GAUGE ASSY |
| G27067-81 | FIXTURE EQPT |
| G27068-1 | BALL SCREW SUPPORT -TE FLAP DRIVE |
| G27073-1 | BOOTSTRAP CLAMP EQUIPMENT – FAIRING TRAILING EDGE FLAP TRACK |
| G27079-1 | REMOVAL/INSTALLATION EQUIPMENT – FORWARD ATTACH FITTING, INBOARD TRAILING EDGE FLAPS |
| G27084-1 | HANDLING DOLLY – FAIRING, TRAILING EDGE FLAP TRACK |
| G27086-17 | MEASURING EQUIPMENT |
| G27088-1 | SUPPORT EQUIPMENT – VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS |
| G27088-2 | SUPPORT EQUIPMENT – VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS |
| G27090-2 | ADAPTER ASSY |
| G27090-54 | REMOVAL/INSTALLATION ADAPTER – INBOARD ELEVATOR ACTUATOR |
| G27091-1 | SPLINE ADAPTERS - ANGLE GEARBOX DRIVE， INBD & OUTBD TE FLAPS |
| G27095-1 | LADDER EQPT |
| G27098-42 | HOISTING EQUIPMENT – INBOARD TRAILING EDGE FLAP ACTUATOR, POSITIONS 4 AND 5 |
| G27106-1 | SPANNER WRENCH – REMOVAL/INSTALLATION, CANOE FAIRING AERO PLUGS |
| G28001-22 | AIR MOVING EQUIPMENT – AUXILIARY FUEL TANK VENTILATION |
| G28001-23 | TOOL |
| G28005-14 | CHECK FIXTURE EQPT |
| G28005-18 | CHECK FIXTURE EQPT |
| G28005-23 | CHECK FIXTURE EQPT |
| G28005-29 | CHECK FIXTURE EQPT |
| G28005-35 | CHECK FIXTURE EQPT |
| G28005-39 | PAN HEAD SCREW |
| G28009-27 | TOOL |
| G28011-16 | PLUG – FUEL VENT SCOOP, WING TIP |
| G28012-1 | TEST EQPT |
| G28013-20 | TEST EQUIPMENT – OVERRIDE/JETTISON FUEL PUMP, FAULT CURRENT DETECTOR |
| G28014-1 | ADAPTER EQUIPMENT – FUEL SUMP DRAIN VALVES |
| G28014-10 | TOOL |
| G28014-11 | TOOL |
| G28014-5 | Adapter |
| G28014-6 | TOOL |
| G28015-1 | DRAIN FITTING – SURGE TANK |
| G28018-2 | FITTING ASSY GE90 |
| G28018-26 | FUEL FEED TEST EQPT |
| G28018-28 | FUEL FEED TEST EQPT |
| G28018-4 | FITTING ASSY RB211 |
| G28018-7 | FITTING ASSY TRENT800 |
| G28019-73 | TEST EQUIPMENT – FUEL TANK LEAK |
| G28020-1 | WRENCH – SHROUD, APU FUEL DRAIN |
| G28022-1 | BLANKING PLATES AND PLUG EQUIPMENT – AUXILIARY TANK REFUEL/TRANSFER LINES |
| G29007-1 | MUFFLER / SILENCER |
| G29013-33 | TOOL |
| G29015-1 | GFCI HYD PUMP TESTER |
| G30001-1 | BLOCK – HEIGHT GAUGE, WIPER ARM |
| G32004-5 | GAGE EQPT |
| G32005-8 | GAGE EQPT |
| G32007-1 | PROTECTOR – AXLE, WING AND BODY LANDING GEAR |
| G32007-7 | PROTECTOR |
| G32007-9 | THREAD PROTECTOR ASSY |
| G32008-1 | THREAD PROTECTOR EQPT |
| G32008-5 | THREAD PROTECTOR EQPT |
| G32010-3 | COLLAR ASSY |
| G32012-1 | BRAKE PULLER EQUIPMENT – MAIN LANDING GEAR |
| G32012-11 | BRAKE PULLER EQUIPMENT – MAIN LANDING GEAR |
| G32014-29 | TESTER SENSOR BRAKE CONTROL |
| G32015-1 | SUPPORT STAND – BODY GEAR STEERING ACTUATOR |
| G32015-34 | TOOL |
| G32021-18 | FORCE GAGE EQUIPMENT – LANDING GEAR LEVER |
| G32022-1 | TEST EQUIPMENT – TORSION LINK FREE PLAY CHECK, NOSE LANDING GEAR |
| G32027-1 | ALIGN GUIDE – BOLT STEERING MECHANISM, BODY LANDING GEAR |
| G32028-116 | WING/BODY GEAR JACK EQPT |
| G32028-117 | WING/BODY GEAR JACK EQPT |
| G32028-118 | WING COLLAR ASSY RIGHT HAND GEAR |
| G32028-119 | OPP-118 |
| G32028-134 | TURNBUCKLE ASSY |
| G32028-135 | TURNBUCKLE JACK BLG |
| G32028-146 | WING/BODY GEAR JACK EQPT |
| G32028-148 | TURNBUCKLE ASSY |
| G32028-149 | LARGE TURNBUCKLE ASSY |
| G32028-164 | WING/BODY GEAR JACK EQPT |
| G32031-1 | SLING ASSY-WING LANDING GEAR |
| G32031-10 | SLING EQPT |
| G32032-1 | HOLDING EQUIPMENT – INNER CYLINDER AND METERING ROD, WING LANDING GEAR |
| G32033-1 | SLING EQPT |
| G32033-18 | SLING EQUIPMENT – LOWER SEAL REMOVAL/INSTALLATION, NOSE LANDING GEAR |
| G32036-1 | PIN ASSEMBLY EQUIPMENT – GROUND LOCK, NOSE LANDING GEAR |
| G32036-2 | PIN ASSEMBLY EQUIPMENT – GROUND LOCK, NOSE LANDING GEAR |
| G32039-25 | WRENCH EQUIPMENT – WHEEL RETENTION NUT, WLG AND BLG |
| G32039-4 | WRENCH ASSY - WHEEL RETENTION NUT |
| G32039-42 | TOOL |
| G32041-38 | WRENCH KIT – BODY LANDING GEAR |
| G32043-1 | WRENCH KIT – NOSE LANDING GEAR |
| G32043-13 | TOOL |
| G32044-1 | REMOVAL/INSTALLATION EQUIPMENT – JURY AND DRAG STRUT, BODY LANDING GEAR |
| G32046-1 | REMOVAL/INSTALLATION EQUIPMENT – RETRACT ACTUATOR, BODY LANDING GEAR |
| G32047-1 | REMOVAL/INSTALLATION EQUIPMENT – TRUNNION FORK, WING LANDING GEAR |
| G32048-38 | LOCK EQUIPMENT |
| G32048-4 | TOOL |
| G32048-41 | LOCK EQUIPMENT – DOOR, BODY LANDING GEAR |
| G32049-1 | LOCK EQUIPMENT |
| G32050-1 | HOIST EQPT-RETRACT ACTUATOR,NLG |
| G32051-1 | HANDLE LOCK – WING & BODY LANDING GEAR DOORS, GROUND RELEASE |
| G32052-1 | SYSTEM PIN-NLG |
| G32052-2 | PIN ASSY |
| G32053-78 | SLING – RETRACT ACTUATOR, WING GEAR |
| G32054-1 | REMOVAL/INSTALLATION EQUIPMENT – DOORS, WING LANDING GEAR AND BODY LANDING GEAR |
| G32056-1 | RETENTION TOOL |
| G32063-1 | PULLER EQUIPMENT – SHEAR PIN, BEARING HOUSING, WING LANDING GEAR |
| G32065-1 | HOIST EQUIPMENT – DRAG STRUT, NOSE LANDING GEAR |
| G32072-1 | LOCKOUT PIN – NOSE LANDING GEAR, STEERING BYPASS |
| G32073-1 | PLIERS – BRAKE TEMPERATURE CONNECTORS |
| G32075-16 | TEST EQUIPMENT - BRAKE BLEED PORT |
| G32078-1 | Clamp assy-nose landing gear steering |
| G32079-1 | Manifold - Service, Landing Gear Struts |
| G34002-1 | CALIBRATION EQPT |
| G34002-2 | CALIBRATION EQPT |
| G34002-5 | CHECKING FIXTURE |
| G35003-1 | RESTRAINING EQPT |
| G35003-4 | RESTRAINING EQPT |
| G36018-7 | WRENCH SET – FAN AIR TEMPERATURE SENSOR MOUNTING BOLT |
| G36035-13 | HOSE ASSY |
| G36035-18 | 45º FITTING ASSY |
| G36035-32 | ADAPTER ASSY |
| G36035-36 | GE & PW FITTINGS BOX |
| G36035-37 | FILTER FITTING ASSY |
| G36035-38 | FILTER FITTING ASSY |
| G36035-39 | HOSE FITTING |
| G36035-77 | Test eqpt-pneumatic system health check |
| G38002-2 | PLUG EQUIPMENT – DUAL PORTED WASTE WATER DRAIN MAST |
| G38004-10 | BLOCKAGE RMVL TOOL |
| G38004-13 | BLOCKAGE RMVL TOOL |
| G38004-17 | BLOCKAGE REMOVAL TOOL – VACUUM LAVATORY SYSTEM |
| G38005-111 | TEST CHAMBER EQUIPMENT – LAVATORY SERVICE PANEL |
| G38005-61 | ADAPTER EQPT |
| G38006-1 | BLOCKAGE RMVL EQPT |
| G47001-19 | TEST EQUIP NITROGEN |
| G49002-95 | CRADLE EQPT |
| G49002-96 | CRADLE EQPT |
| G49002-98 | CRADLE ASSY |
| G49005-61 | SLING EQPT |
| G49005-68 | SLING EQUIPMENT – AUXILIARY POWER UNIT (APU) |
| G49007-1 | THREAD PROTECTOR EQUIPMENT – APU RETENTION BOLTS |
| G49007-5 | THREAD PROTECTOR EQUIPMENT – APU RETENTION BOLTS |
| G49008-1 | SLING EQUIPMENT – AUXILIARY POWER UNIT (APU) REAR MOUNT |
| G49009-1 | SUPPORT EQPT |
| G49010-1 | DISPATCH KIT – ACTUATOR REPLACEMENT LINK, APU AIR INLET DOOR |
| G49011-1 | SLING EQUIPMENT- APU GENERATOR |
| G500-145RN | HYDRAULIC CRANE-RE- |
| MOVAL/INSTALLATION, | |
| LANDING GEAR | |
| G51002-1 | FALL PROTECTION – OVERHEAD PERSONNEL SUPPORT |
| G51003-1 | TOOL |
| G51004-1 | STATIC BALANCE EQUIPMENT – FLIGHT CONTROL SURFACES |
| G52001-8 | TOOL |
| G52015-1 | TEST EQPT |
| G52015-12 | TEST EQPT |
| G52015-17 | TEST EQPT |
| G52016-1 | SLING – TYPE A DOOR REMOVAL/INSTALLATION |
| G52017-22 | ESCAPE SLIDE SIMULATION |
| G52023-14 | SAFETY BARRIER ASSY |
| G52031-15 | DUMMY LATCH PIN SET – SIDE CARGO DOOR, MAIN DECK |
| G52032-1 | REMOVAL EQUIPMENT – HINGE PINS, MAIN CARGO DOOR |
| G52035-1 | SPANNER WRENCH EQUIPMENT |
| G52038-1 | SLING EQUIPMENT – BULK CARGO DOOR |
| G52039-1 | OVERHEAD SLING EQPT |
| G52040-1 | PERSONNEL BARRIER |
| G52040-82 | PERSONNEL BARRIER – NOSE CARGO DOOR |
| G52041-1 | SET - DUMMY LATCH PIN |
| G53001-104 | SCAFFOLD EQUIPMENT – PRESSURE BULKHEAD ACCESS |
| G53001-134 | SCAFFOLD EQUIPMENT – PRESSURE BULKHEAD ACCESS |
| G53001-230 | SCAFFOLD EQUIPMENT – PRESSURE BULKHEAD ACCESS |
| G53002-19 | RADMOE SLING |
| G53002-34 | SLING – RADOME ASSEMBLY |
| G53002-37 | B747 radome removal/instl sling kits |
| G54002-1 | SLING ASSY |
| G54003-1 | GAUGE – DIAGONAL BRACE, NACELLE STRUT |
| G54004-36 | SLING |
| G54006-24 | SLUG KIT |
| G54007-125 | BASE PLATE ASSY |
| G54007-165 | STRUT SLING ASSY |
| G54007-89 | MOUNT BASE PLATE ASSY |
| G54007-91 | MOUNT BASE PLATE ASSY |
| G54007-93 | MOUNT BASE PLATE ASSY |
| G54008-50 | TOOL |
| G54008-68 | REMOVAL/INSTALLATION KIT – FUSE PIN |
| G54008-70 | TOOL |
| G54014-1 | ADAPTER – PIVOT BOLT, SPRING BEAM |
| G54015-1 | WRENCH SET – STRUT INSTALLATION, UPPER LINK, FRONT SPAR |
| G54016-1 | SLING EQPT - STRUT REMOVAL/INSTALLATION/B747-8 |
| G54017-38 | RMVL/INSTL KIT - FUSEPIN |
| G54020-1 | SLING EQPT |
| G54020-3 | BASE EQPT |
| G55001-1 | SLING EQUIPMENT – VERTICAL FIN |
| G57002-24 | SLING EQUIPMENT |
| G57003-17 | TURNBUCKLE – WING TRAILING EDGE RIB INSTALLATION |
| G57004-7 | INSTL/REMOVAL TOOL |
| G57006-1 | RIGGING BEAM – FIXED TRAILING EDGE, UPPER PANEL |
| G57008-1 | Holder Torque - Wing Landing Gear |
| G57011-1 | BUSHING REPLACEMENT KIT |
| G57012-1 | SPOTFACE EQUIPMENT – CORROSION REMOVAL, WING BOX SKINS |
| G601R101004-1 | CABLE KIT; DROP DOWN DOOR |
| G601R101103 | TOOL |
| G601R102001-1 | KIT- MOORING |
| G601R121605-1 | PANEL, GASEOUS |
| G601R270001-1 | KIT, RIGGING PINS |
| G601R270005-1 | PLATE ASSEMBLY, AILERON/RUDDER |
| G601R274101-1 | TOOL |
| G601R276202-27 | Kit Assy − PCU Safety Tools |
| G601R276202-3 | TOOL |
| G601R324301-1 | KIT - BRAKE BLEEDING |
| G601R324306-1 | TOOL |
| G601R325102-1 | TOOL |
| G601R326101-1 | TOOL |
| G601R326106-1 | TOOL |
| G601R521109-1 | TOOL COMPRESSION GAS SPRING |
| G601R710008-1 | TOOL |
| G601R710009-1 | TOOL |
| G601R710010-1 | TOOL |
| G670100001-1 | TOOL |
| G670100002-1 | TOOL |
| G670-321101-2 | SLEEVE; AXLE PROTECTION |
| G670-321102-3 | THREAD PROTECTOR |
| G71001-125 | TORQUE ADOPTER |
| G71001-181 | BOOTSTRAP EQUIPMENT – CF6-80C2B ENGINE |
| G71002-45 | Engine Cradle, CF6-80C2B Engine |
| G71002-46 | TOOL |
| G71002-48 | ENGINE CRADLE |
| G71003-105 | ENG 1 & 4 OUTBD ARM CABLE ASSY |
| G71003-161 | ENG 1 & 4 UPR ARM SWIVEL FITTING ASSY |
| G71003-176 | UPR FWD SPRT ASSY |
| G71003-209 | BOOTSTRAP EQPT |
| G71003-210 | LWR FWD SPRT ASSY |
| G71003-211 | INBD ARM ASSY |
| G71003-212 | OUTBD ARM ASSY |
| G71003-216 | ENG 1 & 4 OUTBD ARM ASSY |
| G71003-223 | PIN ASSY |
| G71003-234 | PIN ASSY |
| G71003-24 | COUPLING ROD ASSY |
| G71003-25 | BOOTSTRAP CABLE ASSY |
| G71003-34 | FLANGE PROTECTOR ASSY |
| G71007-18 | BRACKET ASSY,OUTBOARD |
| G71007-19 | BRACKET ASSY,INBOARD |
| G71007-28 | SLING EQPT-INLET COWL |
| G71007-30 | SLING ASSY |
| G71009-207 | FIXTURE – PROOF LOAD, BOOTSTRAP EQUIPMENT |
| G71010-79 | HANDING EQPT |
| G71010-80 | HANDING EQPT |
| G71010-81 | HANDING EQPT |
| G71013-1 | SLING-FAN COWL |
| G71014-1 | BEAM – ENGINE HANDLING, RB211-524 |
| G71015-75 | CRADLE |
| G71020-1 | WRENCH – FLEX NUT, 15TH STAGE MANIFOLD AND DUCT, PW4000 |
| G71021-16 | EXTENSION EQPT |
| G71022 | HOLD OPEN EQPT-ENGINE FAN/CORE COWL,CF6-80C2B |
| G71022-45 | LH T/R ATTACHMENT ASSY |
| G71022-46 | RH T/R ATTACHMENT ASSY |
| G71022-54 | HOLD OPEN ASSY |
| G71023-52 | HOLD OPEN EQPT |
| G71025-39 | SLING |
| G71028-82 | BOOTSTRAP EQPT-CF6-50-ENGINE |
| G71029-90 | EQUIPMENT - BOOTSTRAP |
| G71030-1 | SLING EQUIPMENT – NOSE COWL, CF6-50 AND RB211-524 ENGINES |
| G71030-13 | TOOL |
| G71032-1 | SLING EQUIPMENT – INLET COWL, CF6-50 AND RB211-524 ENGINES |
| G71037-130 | ENGINE CHANGE KIT – GENX-2B |
| G71037-145 | Load cell calibration kit |
| G71037-16 | HOLD OPEN RIGHT ARM ASSEMBLY |
| G71037-23 | TOOL |
| G71037-26 | Extension，3' |
| G71038-1 | UNLOCK POLE EQUIPMENT – FAN COWL HOLD OPEN ROD |
| G71038-13 | UNLOCK POLE - FAN COWL HOLD OPEN RODS |
| G71040-1 | TRANSPORTATION EQUIPMENT – ENGINE MOUNT STABILIZATION |
| G71042-41 | HOIST EQUIPMENT – ENGINE MOUNTS AND THRUST LINKS |
| G71043-1 | SLING EQUIPMENT – FAN COWL |
| G71044-1 | SLING EQUIPMENT – FAN COWL SUPPORT BEAM, GENX-2B |
| G71045-1 | 6 TON HOIST ASSY |
| G71045-13 | TOOL |
| G71045-15 | TOOL |
| G71045-2 | 3 TON HOIST ASSY |
| G71045-39 | TOOL |
| G71046-76 | STAND ASSEMBLY – STORAGE, INLET ASSEMBLY |
| G71048-1 | THREAD PTOTECTOR EQPT |
| G752040-82 | TOOL |
| G76002-15 | TOOL |
| G76002-18 | PROTECTOR ADAPTER |
| G76002-19 | PROTECTOR ADAPTER |
| G76002-37 | PROTRACTOR |
| - THRUST | |
| REVERSER | |
| G76002-42 | TOOL |
| G78002-1 | HOLD OPEN SET |
| G78003-25 | STRAP ASSY |
| G78003-31 | TOOL |
| G78003-53 | SLING EQPT |
| G78003-8 | STRAP ASSY,FWD |
| G78003-9 | STRAP ASSY,AFT |
| G78005-10 | ADAPTER |
| G78006-74 | DOLLY(LH) |
| G78006-75 | DOLLY(RH) |
| G78007-71 | SLING EQUIPMENT – REMOVAL/INSTALLATION FAN REVERSER SLEEVE, GENX-2B |
| G78008-77 | THRUST REVERSER CHANGE KIT – GENERAL ELECTRIC GENX-2B |
| G78009-1 | GAUGE |
| GSB1000029 | TOOL |
| GSE170-LTC52013 | SAFETY LOCK, PASSENGER AND SERVICE DOORS |
| GSE55916 | BOGIE TRUCK TROLLEY |
| GSE55923 | WRENCH NUT,AXL BLG AND WLG |
| GSE55925 | GUIDE BULLET WHEEL ASSEMBLY B.L.G.&W.L.G. |
| GSE55933 | KIT-WRENCH,TORQUE REACTOR RETAINING PIN.NUT LWR TORQUE LINK-BLG |
| GSE55935 | R & I TOOL PIN.GROUND LOCK.BLG |
| GSE55937 | KIT -WRENCH, TORQUE REACTOR BLG |
| GSE55946 | LIFTING EQUIPMENT |
| GSE55949 | RESTRAINT-BOGIE ACTUATOR,WLG |
| GSE56111 | TOOL - COMPRESSION, SHOCK STRUT WLG |
| GSE56142 | GUIDE BULLET PIN,UPPER & LWR TORSION LINKS BODY LANDING GEAR |
| GSE56143 | BULLET -GUIDE, TORSION LINK APEX PIN BLG |
| GSE56212 | GAG - SIDE STAY, WLG |
| GSE56845 | REACTOR-TORQUE |
| H21828 | EXTRACTOR |
| H21966-1000 | EXTRACTOR SUPS. BY AC FITTED WITH A T.P.I.S. AND |
| H4660A | TOOL |
| H-4660A | TOOL |
| H46828 | ATR 72 AXLE NUT WRENCH |
| H47015 | PLUG-TEST |
| H47280 | EXTRACTOR |
| H47281 | EXTRACTOR |
| H47281-1 | TOOL |
| H47682 | ADAPTER |
| H47712 | EXTRACTOR |
| H-5265 | AIR CHUCK / 8V1 |
| H-5265A | TOOL |
| HA2273-1 | KEY AND TETHERED FLAG |
| HAT-AB-0573-01 | TOOL |
| HAT-AB-0573-02 | TOOL |
| HAT-AB-0573-03 | TOOL |
| HAT-AB-0573-04 | TOOL |
| HC600-1P | TOOL |
| HIX1001 | SLING,HANDLING |
| HIX10010 | TOOL |
| HIX1001-0G | SLING,HANDLING |
| HIX1003 | HANDLING BRACKET-PIVOTING DOOR |
| HIX3001 | WORKSTAND-MOBILE |
| HIX3002 | HOLD-OPEN ROD-PIVOTING DOOR |
| HIX3005 | SLEEVE SAFETY-DOOR PIVOTING |
| HIX3005-0G | SAFETY SLEEVE PIVOTING DOOR. |
| HIX3007 | STAND-HYDRAULIC ACTUATOR ROD |
| HIX3008 | LOCK-OUT PIN |
| HIX3008-0G | THRUST REV LOCK OUT PIN |
| HIX3009 | TOOL |
| HIX3010 | CHECK TOOL - J RING |
| HIX30100 | TOOL |
| HIX3010-0 | CHECK TOOL - J-RING |
| HIX3010-0G | CHECK TOOL - J-RING |
| HIX3010G | TOOL |
| HIX4001 | PUMP-ACTUATOR, FAN REVERSER |
| HIX6002 | PLUG T/R RIGHT ENGIN |
| HIX6003 | HALF PLUG, LEFT-THRU |
| HPX421A | GENERIC 1N23 OR |
| PN: HPX421A, | |
| HPX421B, 1N23WE, | |
| 423B USE | |
| HSK6263-1 | TEST KIT- FLIGHT DECK DOOR(Equivalent functional tools) |
| HTE660020 | TOOL |
| HTE714-85G | TOOL |
| HU10623 | TOOL |
| HU12675 | TOOL |
| HU12676 | TOOL |
| HU12678 | TOOL |
| HU18493 | TOOL |
| HU19015 | TOOL |
| HU19036-1 | EXTRACTOR - BORESCOPE PLUG |
| HU19385-1 | TOOL |
| HU20365-4 | TOOL |
| HU20368-1 | TOOL |
| HU20430-2 | TOOL |
| HU20432-1 | TOOL |
| HU20598-3 | TOOL |
| HU20679-1 | TOOL |
| HU20744 | TOOL |
| HU20746-1 | TOOL |
| HU20767 | TOOL |
| HU20767-2 | TOOL |
| HU20892 | TOOL |
| HU21182-1 | TOOL |
| HU21350-1 | TOOL |
| HU21561-2 | TOOL |
| HU21580 | TOOL |
| HU21885 | TOOL |
| HU21887 | TOOL |
| HU23869-2 | TOOL |
| HU24430 | TOOL |
| HU24461 | TORQUE CHECK PLUG |
| HU24462 | TORQUE CHECK PLUG |
| HU24463 | TORQUE CHECK PLUG |
| HU24464 | TORQUE CHECK PLUG |
| HU24465 | TORQUE CHECK PLUG |
| HU24466 | TORQUE CHECK PLUG |
| HU24467 | TORQUE CHECK PLUG |
| HU24468 | TORQUE CHECK PLUG |
| HU24532 | TOOL |
| HU25597-5 | TOOL |
| HU25928 | TOOL |
| HU25928-2 | TOOL |
| HU26828-2 | TOOL |
| HU26895 | TOOL |
| HU27012 | TOOL |
| HU27790 | AVIATION TOOL |
| HU28196 | TOOL |
| HU28445 | TOOL |
| HU28499 | EXTRACTOR - ADAPTER |
| HU28565-3 | TOOL |
| HU28653 | TOOL |
| HU28691-1 | TOOL |
| HU28734 | TOOL |
| HU28745-2 | TOOL |
| HU28761 | TOOL |
| HU28844 | TOOL |
| HU28909-2 | TOOL |
| HU28950-3 | TOOL |
| HU29173 | PIN LOCATION |
| HU29216 | TOOL |
| HU29216-2 | TOOL |
| HU29240 | TOOL |
| HU29255 | IMPACT EXTRACTOR BODY |
| HU29362 | TOOL |
| HU29363 | TOOL |
| HU29555 | TOOL |
| HU30630-2 | TOOL |
| HU30631 | TOOL |
| HU30632 | TOOL |
| HU30644-2 | TOOL |
| HU30695 | TOOL |
| HU30832-2 | TOOL |
| HU31321 | TOOL |
| HU31325 | TOOL |
| HU31435 | TOOL |
| HU31902 | ALIGNMENT PIN |
| HU32599 | TOOL |
| HU33562 | TOOL |
| HU33643 | TOOL |
| HU33680-1 | TOOL |
| HU33734 | TOOL |
| HU33854 | Lift sling |
| HU34068 | TOOL |
| HU34304 | TOOL |
| HU35059 | TOOL |
| HU35098-1 | TOOL |
| HU35119-2 | TOOL |
| HU35121 | TOOL |
| HU35122-1 | TOOL |
| HU35274 | TOOL |
| HU35382-1 | LIFTING ADAPTER |
| HU35451 | EXTRACTOR |
| HU35492 | TOOL |
| HU35522-2 | TOOL |
| HU35829-2 | TOOL |
| HU35859-1 | TOOL |
| HU35861 | TOOL |
| HU35865 | TOOL |
| HU36012 | TOOL |
| HU36018 | TOOL |
| HU36041 | TOOL |
| HU36263 | TOOL |
| HU36327-1 | TOOL |
| HU36634 | LIFTING TOOL |
| HU36787 | TOOL |
| HU36987-1 | TOOL |
| HU36989 | TOOL |
| HU36990-2 | TOOL |
| HU36991 | TOOL |
| HU36992 | TOOL |
| HU36994-1 | TOOL |
| HU37060 | TOOL |
| HU37260 | TOOL |
| HU37292-4 | TOOL |
| HU37331-5 | TOOL |
| HU37373-1 | TOOL |
| HU37374-2 | TOOL |
| HU37504 | TOOL |
| HU37523-2 | TOOL |
| HU37525-1 | TOOL |
| HU37526-1 | IMMOBILISER-TORQUE |
| HU37527 | TOOL |
| HU37527-1 | SPANNER - TORQUE TIGHTEN FAN CUR |
| HU37528 | TOOL |
| HU37529 | TOOL |
| HU37561 | TOOL |
| HU37581-3 | TOOL |
| HU37582-3 | TOOL |
| HU37584 | TOOL |
| HU37594 | ADAPTOR-CHOCKING PAD & SLIDER |
| HU37604 | TOOL |
| HU37606 | TOOL |
| HU37624 | TOOL |
| HU37628 | TOOL |
| HU37639-2 | FIXTURE |
| HU37640 | TOOL |
| HU37646-1 | TOOL |
| HU37648 | TOOL |
| HU37693 | ASSEMBLY TOOL |
| HU37694 | ASSEMBLY TOOL |
| HU37706 | TOOL |
| HU37782 | PILOT-GUIDE R I FAN DISK AND BLADES |
| HU37802-2 | TOOL |
| HU37807-2 | TOOL |
| HU37809 | TOOL |
| HU37862 | TOOL |
| HU37986 | COVER PROTECT - DISK CURVIC COUPLING |
| HU37987 | COVER - PROTECT, |
| HU38001 | TOOL |
| HU38029 | TOOL |
| HU38056 | EXTRACTOR |
| HU38122-3 | Turning tool |
| HU38260 | TOOL |
| HU38270 | TOOL |
| HU38390-3 | PEEN TOOL |
| HU38411 | TOOL |
| HU38452 | TOOL |
| HU38456-3 | TOOL |
| HU38479 | TOOL |
| HU38633-1 | TOOL |
| HU38642 | EXTRACTOR/ADJUSTING TOOL |
| HU38835-1 | TOOL |
| HU38836 | TOOL |
| HU38837 | PLIERS-CRIMPING SEALING WASHER AND NOZZLW FEED TUBE |
| HU38892-2 | TOOL |
| HU38921 | TOOL |
| HU39037-1 | TOOL |
| HU39311 | IMMOBILING SPANNER |
| HU39312 | IMMOBILING SPANNER |
| HU39313 | IMMOBILING SPANNER |
| HU39483 | TOOL-FITTING FAN BLADE ASSY |
| HU39652 | EXTRACTOR ADAPTOR |
| HU39652-1 | EXTRACTOR FUEL SPRAY NOZZLE |
| HU39713 | TOOL |
| HU39840 | TOOL |
| HU40025 | TURNING TOOL |
| HU40100 | TOOL |
| HU40160 | TOOL |
| HU40172 | TOOL |
| HU40197 | TOOL |
| HU40218 | TOOL |
| HU40238 | TOOL |
| HU40239 | TOOL |
| HU40248-1 | TOOL |
| HU40324 | TURNING TOOL - ROTATE IP SYSTEM |
| HU40371 | TOOL |
| HU40372 | TOOL |
| HU40373 | TOOL |
| HU41334 | TOOL |
| HU41503 | TOOL |
| HU41504 | TOOL |
| HU41676-1 | TOOL |
| HU41705 | TOOL |
| HU41716 | TOOL |
| HU41730 | TOOL |
| HU41792 | TOOL |
| HU41850-2 | TOOL |
| HU41852 | TOOL |
| HU42018-2 | GAUGE - TAPER CHECK |
| HU42130-1 | GAUGE TAPER - FAN TIP CLEARANCE |
| HU42192 | TOOL |
| HU42200 | TOOL |
| HU42209 | TOOL |
| HU42375 | EXTRACTOR-AIR INTAKE SPINNER |
| HU42673-1 | TOOL |
| HU42673-2 | TOOL |
| HU43165 | TOOL |
| HU43324 | TOOL |
| HU43325 | TOOL |
| HU43328 | TOOL |
| HU43343 | TOOL |
| HU43455 | TOOL |
| HU43489-1 | TOOL |
| HU43915 | SOCKET-REMOV/INST IGNITOR PLUG |
| HU44042 | EXTRACTOR - HP OIL FILTER |
| HU44115 | TOOL |
| HU44200 | MANDREL -ASSEMBLE OIL SLINGER,DEDICATED ALTERNATOR |
| HU44201 | TOOL |
| HU44202 | EXTRACTR -REMOVAL .DEDICATED ALTERNATOR OIL SLINGER |
| HU44204 | SPANNER - ALTERNATOR |
| RETENTION NUT | |
| HU44265 | DOWEL |
| HU44483 | TOOL |
| HU44525-1 | IMMOBILIZER |
| HU44525-2 | Immobiliser |
| HU44811 | TOOL |
| HU44811-1 | TOOL |
| HU44819 | ADAPTOR - CHOCKING PAD AND SLIDER |
| HU44954 | TOOL |
| HU45084 | TOOL |
| HU45311 | MVP BAG |
| HU45473 | TOOL |
| HU45518-1 | TOOL |
| HU45551 | TOOL |
| HU45555-1 | TOOL |
| HU50110 | EXTRACTOR |
| HU50248 | TOOL |
| HU50255 | TOOL |
| HU50282 | TOOL |
| HU50304-6 | TOOL |
| HU50305-2 | TOOL |
| HU50307 | EXTRACTOR ADAPTOR |
| HU50397-2 | TOOL |
| HU50463-2 | TOOL |
| HU50484 | TOOL |
| HU50485 | TOOL |
| HU50822-3 | TOOL |
| HU50861-2 | TOOL |
| HU51071 | TOOL |
| HU51166 | TOOL |
| HU51243 | TOOL |
| HU51358-2 | TOOL |
| HU51359-1 | TOOL |
| HU51409 | LEVER - OPEN VIGV BY LEVERING STARBOARD RAM. |
| HU51410 | IMMBLSER |
| HU51492-1 | TOOL |
| HU51738-2 | TOOL |
| HU51777-1 | TOOL |
| HU55019 | TOOL |
| HU55060-1 | SLING-ENGNE |
| HU55062-3 | TOOL |
| HU55063-1 | TOOL |
| HU55065-4 | TOOL |
| HU55074-3 | CRADLE FOR GEARBOX |
| HU55083-5 | TROLLEY - POSITION GEARBOX UNITS IDG |
| HU55091-5 | TOOL |
| HU55094 | BAR,TOE-MULTI-PURPOSE STAND |
| HU55105-2 | SUPPORT-FRONT AND |
| REAR ENGINE MOUNTS | |
| HU55108-1 | SLING,TURNOVER&INSTALLATION FOR FLIGHT CNA |
| HU55108-4 | SLING,ASSEMBLY,FOR REMOVAL/INSTALLATION |
| HU55108-5 | TOOL |
| HU55118-1 | TOOL |
| HU55119-3 | TOOL |
| HU55142 | Mat–Air intake cowl/A330 |
| HU55142-1 | MAT-AIR INTAKE COWL |
| HU55148 | PUMP-HAND HYDRAULIC TRU |
| HU55151-1 | BRACE-FAN COWL DOOR TO'C' DUCT-STARBOARD |
| HU55152-1 | BRACE-FAN COWL DOOR TO'C' DUCT-PORT |
| HU55178-2 | TOOL |
| HU55181-1 | SPRUNG ADAPTER-R I EXTERNAL GEARBOX MODU |
| HU55211-1 | TOOL |
| HU55217-3 | TOOL |
| HU55218-2 | Turnover adapter |
| HU55230 | TOOL |
| HU55230-1 | TROLLEY NOZZLE ASSY |
| HU55230-2 | TROLLTY(UPPER&LOWER)CNA FIT REMOVAL&PARKING |
| HU55231 | TROLLEY(UPPER)CNA FIT,REMOVAL&PARKING |
| HU55231-1 | TOOL |
| HU55257 | TOOL |
| HU55276-1 | Support pillar |
| HU55280-3 | TOOL |
| HU55280-3+HU55281-4+HU55094 | TOOL |
| HU55281-3 | CRADLE - ENGINE TRENT 700 |
| HU55281-4 | CRADLE, ENGINE-TRENT |
| HU55324-6 | TOOL |
| HU55330-1 | ADAPTOR ,SUPPORT |
| HU55334 | TOOL |
| HU55336-1 | PARKING-STAND COMMON NOZZLE ASSY |
| HU55344 | TOOL |
| HU55360 | TOOL |
| HU55391-1 | PARKING-STAND AIR INTAKE COWL |
| HU55418-5 | ROLL-OVER STAND |
| HU55436-2 | Adapter - Trolley, Install/Remove IDG |
| HU55437 | TOOL |
| HU55437-1 | TOOL |
| HU55437-2 | ADAPTER POSITIONER |
| HU55439-5 | LIFTER |
| HU55630 | BAG |
| HU55656 | TOOL |
| HU55736-1 | TOOL |
| HU55761 | ADAPTOR,HOIST |
| HU55864-1 | TOOL |
| HU55865-4 | JACKING TROLLEY FOR GEARBOX ASSEMBLY |
| HU55903-1 | TOOL |
| HU55905 | TOOL |
| HU55949 | TOOL |
| HU55950 | TOOL |
| HU56064 | TOOL |
| HU56090 | T700,PEDESTALS.ENGINE PARKING |
| HU56187-1 | TOOL |
| HU56203-1 | TOOL |
| HU56204 | TOOL |
| HU56474 | TOOL |
| HU56545-2 | TROLLEY JACK - LRU |
| HU80277 | HOSE |
| HU80283 | TOOL |
| HU80298 | FLEXIBLE DRIVE BRUSH |
| HU80887 | TOOL |
| HU80888 | TOOL |
| HU80954 | TOOL |
| HU80955 | IMMOBILIZER |
| HU81007 | TOOL |
| HU81215 | TOOL |
| HU81215-1 | INHIBITING BYPASS HOSE FOR HMU |
| HU81332 | TOOL |
| HU82134 | TOOL |
| HU82353 | TOOL |
| HU85001 | WASHER EXTRACTOR |
| HU85002 | IMMOBILIZER |
| HU85003 | Extractor |
| HU85004 | INSERTION TOOL - DRIVE, DRIVING GEAR |
| HU85007 | TOOL |
| HU85008 | LOCKNUT WRENCH |
| HU85249-1 | TOOL |
| HU85298 | PUSHER-OIL DISTRIBUTOR, GEARBOX DRIVE GEAR |
| HU85484 | TOOL |
| HU85509 | WRENCH - VESPEL LOCKNUT, GEARBOX DRIVE GEAR |
| HU85515 | IMMOBILIZER - ANTI-ROTATION, GEARBOX DRIVE GEAR |
| HU87101 | BATI DE STOCKAGE ETDE MANUTENTION STORAGE AND HANDLING TROLLEY |
| HU87104-2 | HARNAIS DE HISSAGE,PORLE SUP UPPER PIVOT DOOR, LIFT SLING |
| HU87105-3 | Lifter - Lower Pivot Doors, Thrust Rever |
| HU87106 | TROLLEY |
| HU87110 | Strut - Removal/Installation, Pivot Door |
| HU87111-2 | TOOL |
| HU87112-1 | CENTRALISING TOOL - RVT |
| HU87112-2 | CENTRALISING TOOL |
| HU87113 | TOOL |
| HU87113-1 | SAFETY STRUT - HOLD OPEN DEVICE（1EA=2PCS） |
| HU87115 | TOOL INSTL, BEARING PIVOT DOOR |
| HU87116 | SOCKET |
| HU87119 | EXTRACTOR |
| HU87120 | EXTRACTOR |
| HU87121-1 | EXTRACTOR |
| HU87122 | PROTECTOR |
| HU87124 | SUPPORT - IMMOBILISE ACTUATOR |
| HU87127 | INSTALLATION EXTRA |
| HU87128 | INSTALLATION EXTRACT |
| HU87129 | INSTALLATION EXTRA |
| HU87131 | TOOL |
| HU87131-1 | EXTRACTOR |
| HU87132 | COLLAR HOLD OPEN PIVOT DOOR |
| HU87133 | Sling - Removal/Installation 'C' Ducts |
| HU87500 | FIXTURE INST PRECOOLER DUCT |
| HU87506 | TOOL |
| HU87506-1 | TOOL |
| HU87516 | TOOL |
| HU87525 | CLAMP |
| HU87527 | INSTALLATION TOOL |
| HU87528 | SHAFT DUMMY |
| HU88000 | SLING-R I HINGED COWLS |
| HU88000-1 | SLING-R I HINGED COWLS |
| HU88001 | TROLLEY |
| HU89000 | COVER-AIR INTAKE COWL |
| HU89020-2 | TROLLEY |
| HU89022-2 | COVER, NOSE |
| HU89023-1 | BLANK |
| HU89024-1 | COVER-VENTILATION AIR INTAKE |
| HU89025-1 | SLING TURNOVER-AIR INTAK |
| HU89025-1-5 | TOOL |
| HW93718 | HYDRAULIC JACK |
| IAE1F10003 | PUSHER-INSTALLATION |
| IAE1F10004 | PUSHER-INSTALLATION |
| IAE1F10007 | PULLER-REMOVAL |
| IAE1F10008 | PULLER-REMOVAL |
| IAE1F10009 | PULLER-REMOVAL |
| IAE1F10010 | PULLER-REMOVAL |
| IAE1F10011 | TOOL |
| IAE1F10012 | TOOL |
| IAE1F10021 | STAND STORAGE ENGINE ASSY GEARBOX MODULE GROUP |
| IAE1F10022 | TOOL |
| IAE1F10023 | ADAPTER HANDLING-GEARBOX |
| IAE1F10026 | TOOL |
| IAE1F10028 | PEDESTAL, FIXED |
| IAE1F10031 | PUSHER-INSTALLATION |
| IAE1F10032 | PUSHER-INSTALLATION |
| IAE1F10041 | TEC LIFT ADAPTER |
| IAE1F10042 | EYE LIFTING REAR BARE ENGINE |
| IAE1F10043 | FIXTURE,SUPPORT TEC |
| IAE1F10044 | TOOL |
| IAE1F10049 | STAND VERTICAL LPT MODULE GROUP |
| IAE1F10051 | TOOL |
| IAE1F10052 | SLING, TWO CABLES |
| IAE1F10067 | PULLER-REMOVAL |
| IAE1F10069 | PULLER-REMOVAL |
| IAE1F10070 | PUSHER-INSTALLATION |
| IAE1F10072 | PUSHER-INSTALLATION |
| IAE1F10080 | STAND HORIZONTAL LPT MODULE GROUP |
| IAE1F10082 | PIN, GUIDE |
| IAE1F10085 | PENESTAL ADJUSTABLE |
| IAE1F10158 | TOOL |
| IAE1F10195 | TOOL |
| IAE1F10200 | TOOL |
| IAE1F10210 | TOOL |
| IAE1F10211 | TOOL |
| IAE1F10220 | TOOL |
| IAE1F10238 | TOOL |
| IAE1F10243 | TOOL |
| IAE1F10252 | TOOL |
| IAE1F10253 | TOOL |
| IAE1F10254 | TOOL |
| IAE1F10255 | TOOL |
| IAE1F10256 | TOOL |
| IAE1F10260 | V2500 LIGTING BEAM |
| IAE1F10292 | PULLER，REMOVAL L/H FRONT MOUNT PIN G.B.X |
| IAE1F10293 | PULLER，REMOVAL R/H FRONT MOUNT PIN G.B.X |
| IAE1F10294 | PULLER, REMOVAL CENTER FRONT MOUNT PIN G.B.X |
| IAE1F10363 | ADJUSTABLE SLING |
| IAE1F10412 | PULLER |
| IAE1J12000 | BRACKET REAR-ENGINE ASSY |
| IAE1J12004 | PULLER PUSHER |
| IAE1J12007 | ADAPTER, SLING |
| IAE1J12008 | TRUNNION - REAR - ENGINE ASSY INTERMEDIATE ( 1 PA |
| IAE1J12016 | TOOL |
| IAE1J12017 | TOOL |
| IAE1J12019 | STAND TRANSPORT STORAGE ENGINE ASSY FAN ROTOR |
| IAE1J12020 | LEVER, PULLER |
| IAE1J12026 | TOOL |
| IAE1J12027 | TOOL |
| IAE1J12091 | TOOL |
| IAE1J12100 | TOOL |
| IAE1J12104 | TOOL |
| IAE1J12105 | TOOL |
| IAE1J12106 | TOOL |
| IAE1J12110 | TOOL |
| IAE1J12121 | LEVER, PULLER |
| IAE1J12125 | HAMMER SLIDING |
| IAE1J12141 | BOLT-PULLER |
| IAE1J12180 | TOOL |
| IAE1J12181 | TOOL |
| IAE1J12182 | TOOL |
| IAE1J12183 | COVER-PROTECTION |
| IAE1J12187 | WEBBING STRAP COVER PROTECTION |
| IAE1J12188 | BOLT-PULLER |
| IAE1J12221 | TOOL |
| IAE1J12244 | TOOL |
| IAE1J12263 | TOOL |
| IAE1J12269 | TOOL |
| IAE1J12511 | TOOL |
| IAE1J12517 | HANDLE-TURNING |
| IAE1J13400 | WRENCH,MECHANICAL-ENGINE |
| ASSY,DRAIN PORT,FUEL | |
| COOLED OIL COOLER | |
| IAE1J13504 | PULLER REMOVAL |
| IAE1M14083 | TOOL |
| IAE1M14084 | TOOL |
| IAE1M14117 | GAGE CHECKING GO/NO GO |
| IAE1M14118 | GAGE GO/NO GO |
| IAE1M14121 | GAGE CHECKING |
| IAE1M14122 | GAGE CHECKING GO/NO GO |
| IAE1N20001 | FIXTURE-COMMON NOZZLE |
| ASSEMBLY/V2500 | |
| IAE1N20002 | SLING - FAN THRUST REVERSER |
| IAE1N20003 | SLING, LIFTING - COMMON NOZZLE ASSY. |
| IAE1N20004 | DOLLY, COMMON NOZZLE |
| IAE1N20005 | DOLLY-WORKSTAND THRUST REVERSER LEFT HAND |
| IAE1N20006 | TOOL |
| IAE1N20007 | DOLLY-THRUST REVERSERSTORAGE/V2500 |
| IAE1N20008 | COVER, COMMON NOZZLE |
| IAE1N20009 | PUMP HYDRAULIC UNIT-REVERSER C-DUCT |
| IAE1N20010 | PIN-LOCK OUT/V2500 |
| IAE1N20011 | DOLLY C- DUCT ENGINE L/H |
| IAE1N20012 | DOLLY C- DUCT ENGINE R/H |
| IAE1N20014 | SLING-LIFTING |
| IAE1N20015 | SLING，AFT ENGINE |
| MOUNT/V2500 | |
| IAE1N20023 | ADAPTER |
| IAE1N20049 | PIN - LOCKOUT ACTUATOR |
| IAE1N20400 | COVER-INLET COWL |
| IAE1N20401 | DOLLY-INLET COWL |
| IAE1N20402 | DOLLY-FAN COWL DOORS |
| IAE1N20403 | SLING-INLET COWL |
| IAE1N20404 | SLING-FAN COWL DOORS |
| IAE1N20406 | ROTATABLE DOLLY |
| IAE1N20444 | MANUAL SONIC TEST TOOL |
| IAE1N2OO15 | TOOL |
| IAE1P16042 | ADAPTER |
| IAE1P16092 | GAGE, IGNITER |
| IAE1P16094 | TOOL |
| IAE1P16139 | TOOL |
| IAE1P16184 | PULLER, KNOCKER |
| IAE1P16271 | TOOL |
| IAE1P16376 | LOCATING PIN |
| IAE1P16567 | TOOL |
| IAE1P16614 | PIN, VSV RIGGING |
| IAE1P16624 | PULLER |
| IAE1P17038 | PULLER SLIDE CASE TURBO EXHAUST ASSY |
| IAE1P17039 | PULLER |
| IAE1P17041 | TOOL |
| IAE1R18000 | Wrench-engine assy-external plumbing |
| IAE1R18001 | WRENCH |
| IAE1R18002 | WRENCH |
| IAE1R18003 | WRENCH |
| IAE1R18214 | BUILD STAND |
| IAE1R18254 | PIN RIGGING |
| IAE1R18282 | PIN, RIGGING |
| IAE1R18325 | TOOL |
| IAE1R18423 | TOOL |
| IAE1R18674 | SPANNER |
| IAE1R18685 | ADAPTER - INHIBITING RIG |
| IAE1R18757 | INHIBITING RIG |
| IAE1R18891 | PIN RIGGING |
| IAE1R18892 | PIN |
| IAE1R18893 | TOOL |
| IAE1R18894 | TOOL |
| IAE1R18895 | TOOL |
| IAE1R19313 | GAUGE - BAYONET SLOT WEAR |
| IAE1R19416 | WRENCH |
| IAE1R19786 | CONNECTOR |
| IAE2J12030 | TOOL |
| IAE2J12623 | INSPECTION FIXTURE |
| IAE2J13056 | TOOL |
| IAE2P16204 | TUBE-BORESCOPE GUIDE |
| IAE2R18902 | TEST BLOCK- TRANSIENT |
| IAE3J13516 | TOOL |
| IAE3J13517 | TOOL |
| IAE3R19016 | TOOL |
| IAE3R19017 | TOOL |
| IAE3R19469 | CUTTER PROFILE |
| IAE3R19574 | TOOL |
| IAE4J12034 | BRAKE TOOL |
| IAEIN20008 | TOOL |
| IL2940-1 | Norco fitting |
| IL3412-1 | TOOL |
| IL3412-2 | TOOL |
| J07001-23 | JACK FITTING-FORWARD BODY |
| J07001-25 | JACK FITTING-FORWARD BODY |
| J07002-1 | TOOL |
| J07002-1 | JACK FITTING-INNER WING |
| J07003-1 | TOOL |
| J07003-1 | JACK FITTING |
| J07004-59 | EMERGENCY JACKING EQUIPMENT – NOSE LANDING GEAR |
| J07005-52 | JACKING EQUIPMENT – MAIN LANDING GEAR (EMERGENCY CONDITION) |
| J07008-1 | SLING EQUIPMENT |
| J07008-22 | SLING EQUIPMENT |
| J07008-30 | SLING EQUIPMENT |
| J07011-2 | HOIST EQUIPMENT – AIRPLANE RECOVERY, WITHOUT MAIN LANDING GEAR |
| J07013-1 | JACKING EQUIPMENT – MAIN LANDING GEAR AXLE (EMERGENCY CONDITION) |
| J10001-1 | PLUG |
| J10001-13 | PLUG |
| J10001-14 | PLUG |
| J10001-2 | PLUG |
| J10001-25 | PLUG |
| J10003-18 | TOOL |
| J10005-1 | PLUG – VENT DUCT |
| J10006 | PROTECTIVE EQUIPMENT, GE90-115B ENGINE |
| J10007-1 | WEIGHT EQUIPMENT – DUMMY ENGINE |
| J10013-1 | TOOL |
| J10013-13 | TOOL |
| J12001-21 | LADDERS – ACCESS DOORS 112AL AND 117AL |
| J12005-1 | ACCESS STAND – CABIN CROWN |
| J12007-1 | ADAPTER – NOSE LANDING GEAR STRUT SERVICING |
| J20001-63 | HOIST EQUIPMENT – LINE REPLACEABLE UNIT (LRU), MAIN ELECTRICAL/ELECTRONIC (EE) BAY |
| J20002-43 | LOAD POSITIONER |
| J20002-44 | LOAD POSITIONER |
| J20002-59 | POSITIONER |
| J20002-67 | LOAD POSITIONER - ENGINE |
| ACCESSORIES | |
| J20003-14 | RIG PIN ASSY |
| J20003-34 | RIG PIN ASSY |
| J20003-6 | RIG PIN ASSY |
| J20004-1 | PERSONNEL EQUIPMENT – SHOCK ABSORBING LANYARD, HORIZONTAL STABILIZER |
| J20004-8 | TOOL |
| J20005-17 | PERSONNEL EQPT |
| J20005-18 | INTERLOCK ASSY |
| J20005-3 | LINE ASSY |
| J20005-32 | TOOL |
| J20006-24 | PERSONNEL EQPT |
| J20009-108 | HYD JACK ASSY |
| J20009-109 | HYD JACK ASSY |
| J20009-110 | HYD JACK ASSY |
| J20009-136 | ADAPTER |
| J20009-38 | HYD JACK ASSY |
| J20009-50 | LOAD POSITIONER ADAPTER |
| J20009-68 | CRADLE ADAPTER |
| J20009-70 | CRADLE ADAPTER |
| J20009-78 | HYD JACK ASSY |
| J20009-80 | TOOL |
| J20009-88 | CRADLE ADAPTER |
| J20009-98 | TOOL |
| J20011-1 | TOOL |
| J21001-132 | HOIST ADAPTER EQPT |
| J21001-133 | HOIST ADAPTER EQPT |
| J21001-134 | FISHPOLE ADAPTER EQPT |
| J21001-136 | HX ADAPTER ASSY |
| J21001-137 | C/R ADAPTER ASSY |
| J21001-138 | ACM ADAPTER ASSY |
| J21001-154 | TOOL |
| J21001-155 | TOOL |
| J21001-156 | ADAPTER - HOIST, AIR CONDITIONING PACK |
| J21001-7 | SLING ASSY |
| J21001-72 | HOIST ADAPTER EQPT |
| J21001-73 | HOIST ADAPTER EQPT |
| J21001-74 | HX ADAPTER ASSY |
| J21001-75 | C/R ADAPTER ASSY |
| J21001-76 | ACM ADAPTER ASSY |
| J21001-77 | ALIGNMENT ROD ASSY |
| J21001-79 | HOIST ADAPTER EQPT |
| J21001-80 | HOIST ADAPTER EQPT |
| J21001-82 | HX ADAPTER ASSY |
| J21001-83 | C/R ADAPTER ASSY |
| J21001-84 | ACM ADAPTER ASSY |
| J21003-1 | MAINTENANCE PLATFORM EQUIPMENT |
| J21006-1 | LOCK – HOLD OPEN, OUTFLOW VALVE |
| J21007-1 | ADAPTER EQUIPMENT – ADJUSTABLE ANGLE, BOOM HOIST |
| J21007-26 | Tube |
| J21007-31 | ADAPTER EQUIPMENT – ADJUSTABLE ANGLE, BOOM HOIST |
| J21008-7 | DISPATCH EQPT |
| J21008-8 | COVER PLATE |
| J22001-1 | TOOL SET |
| J22001-8 | TOOL SET |
| J22002-1 | SPLINE WRENCH – GEARBOX, AUTOTHROTTLE CONTROL STAND |
| J23001-26 | HOIST ADAPTER |
| J23002-16 | HOIST ADAPTER |
| J24001-50 | HOIST ADAPTER – VARIABLE SPEED CONSTANT FREQUENCY (VSCF) GENERATOR (PW/GE/RR ENGINES) |
| J24002-73 | HOIST ADAPTER-IDG |
| J24005-1 | HOIST EQPT |
| J24011-1 | DISPATCH KIT – VARIABLE SPEED CONSTANT FREQUENCY (VSCF) GENERATOR |
| J24014-24 | TOOL |
| J24015-1 | PRESSURE TEST EQPT |
| J24015-2 | PRESSURE TEST EQPT |
| J24015-23 | PRESSURE TEST EQUIPMENT – ENGINE GENERATORS |
| J24015-3 | PRESSURE TEST EQPT |
| J24016-1 | BATTERY INSPECTION GAUGE TOOL |
| J24016-2 | TOOL |
| J24018-1 | TOOL |
| J24019-1 | TOOL |
| J25006-20 | INSTALLATION/REMOVAL EQUIPMENT – OFF WING ESCAPE SLIDE |
| J25008-1 | CART |
| J25009-1 | AIR FLOW REGULATOR – PNEUMATIC PRESSURE TEST, OFF-WING ESCAPE SLIDE |
| J25010-1 | DOLLY EQPT |
| J25010-95 | DOLLY EQUIPMENT – OVERHEAD FLIGHT ATTENDANT REST (OFAR)/ OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION |
| J25011-64 | ADAPTER EQUIPMENT – OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE, REMOVAL / INSTALLATION |
| J25011-68 | TOOL |
| J25013-46 | HOISTING EQPT-VEST MDL |
| J25013-67 | TOOL |
| J25014-1 | BLANKING PLATE – FREIGHTER COMMON TURNTABLE, POWERED DRIVE UNIT, MAIN DECK |
| J25016-1 | TEST STAND – LATCH ACTUATOR, OFF-WING ESCAPE SLIDE COMPARTMENT DOOR |
| J26004-24 | Equipment - Test, Fire Extinguishing |
| System | |
| J26004-25 | CABLE ASSY |
| J26004-26 | CABLE ASSY |
| J26004-27 | CABLE ASSY |
| J26004-54 | TOOL |
| J26005-1 | TEST EQUIPMENT |
| J26006-32 | CONTROLLER EQUIPMENT – POWER SUPPLY, ELECTRICAL/ELECTRONIC COOLING FANS |
| J26008-16 | LARGE REDUCER ASSY |
| J26008-35 | TEST EQPT |
| J26009-16 | TEST EQUIPMENT – FIRE EXTINGUISHING TUBING, CARGO COMPARTMENT |
| J27001-1 | CLAMP ASSEMBLY – RUDDER TAB |
| J27002-1 | LOCK, HORIZONTAL STABILIZER ACTUATOR BALL NUT |
| J270026-50 | TOOL |
| J27003-1 | DRIVE ADAPTER – TORQUE TUBE COUPLING, LEADING EDGE SLAT |
| J27004-1 | REMOVAL/INSTALLATION EQUIPMENT – SLAT POWER DRIVE UNIT |
| J27004-24 | REMOVAL/INSTALLATION EQUIPMENT – SLAT POWER DRIVE UNIT |
| J27005-33 | LOCK EQUIPMENT |
| J27005-48 | LOCK EQUIPMENT |
| J27005-49 | LOCK ASSY-INBD |
| J27005-64 | LOCK EQUIPMENT FOR |
| INBOARD/OUTBOARD SPOI | |
| J27006-43 | SLING ASSY |
| J27006-48 | TOOL |
| J27007-15 | HOIST EQUIPMENT – HORIZONTAL STABILIZER TRIM ACTUATOR |
| J27007-7 | HOIST EQPT |
| J27007-9 | TOOL |
| J27008-13 | SLING |
| J27009-1 | DOLLY – HORIZONTAL STABILIZER TRIM ACTUATOR |
| J27010-56 | ADAPTER – CONTROL WHEEL |
| J27011-23 | SLING EQUIPMENT – INBOARD TRAILING EDGE FLAP |
| J27011-39 | SLING EQUIPMENT – INBOARD TRAILING EDGE FLAP |
| J27012-20 | SLING – REMOVAL/INSTALLATION, FLAPERON |
| J27013-1 | TOOL |
| J27013-20 | SLING EQUIPMENT – ELEVATOR REMOVAL/INSTALLATION |
| J27013-27 | SLING EQUIPMENT – ELEVATOR REMOVAL/INSTALLATION |
| J27014-19 | SLING EQUIPMENT – SLAT, INBOARD AND OUTBOARD, REMOVAL/INSTALLATION |
| J27015-1 | SPLINE ADAPTER - LEADING EDGE/TRAILING EDGE POWER DRIVE UNIT, MANUAL DRIVE |
| J27016-46 | REM/INSTL EQPT |
| J27017-19 | RIGGING EQPT |
| J27019-1 | PIN SET |
| J27020-1 | RIGGING EQUIPMENT – OUTBOARD TRAILING EDGE FLAPS |
| J27021-1 | DRIVE ADAPTER – TORQUE TUBE COUPLING, TRAILING EDGE FLAP |
| J27022-1 | ADAPTER-TORQUE |
| J27023-54 | REMOVAL/INSTALLATION EQUIPMENT – TRANSMISSION, TRAILING EDGE FLAP |
| J27024-65 | SLING EQUIPMENT – RUDDER, REMOVAL/INSTALLATION |
| J27024-66 | SLING EQUIPMENT – RUDDER, REMOVAL/INSTALLATION |
| J27025-1 | SLING – REMOVAL/INSTALLATION, RUDDER TAB |
| J27026-49 | RESTRAINT EQPT |
| J27026-50 | RESTRAINT EQPT |
| J27027-1 | HOIST EQPT |
| J27027-130 | Hoist eqpt-rem/instl,rudder puc |
| J27027-2 | FRAME & ARM ASSY |
| J27027-52 | HOIST EQPT |
| J27028 | LOCK-RUDDER AND ELEATOR POWER CONTROL UNIT |
| J27028-14 | LOCK-RUDDER & ELEVATOR PCU |
| J27028-20 | LOCK |
| J27028-21 | LOCK |
| J27028-31 | LOCK |
| J27028-38 | LOCK |
| J27028-39 | LOCK - ELEVATOR POWER CONTROL UNIT |
| J27028-41 | TOOL |
| J27030-1 | RIGGING EQUIPMENT – LEADING EDGE SLAT INSTALLATION |
| J27030-11 | TOOL |
| J27030-12 | TOOL |
| J27030-29 | RIGGING EQUIPMENT – LEADING EDGE SLAT INSTALLATION |
| J27030-3 | TOOL |
| J27030-4 | TOOL |
| J27030-7 | TOOL |
| J27030-8 | TOOL |
| J27030-9 | TOOL |
| J27033-1 | LOCK |
| J27034-13 | GAP GAGE – SPOILER TO FLAP CLEARANCE |
| J27035-55 | LOCK EQPT-PLAP |
| J27035-59 | LOCK EQPT-PLAP |
| J27036-53 | CRADLE ASSY |
| J27037-1 | ELECTRICAL COVERS |
| J27038-16 | GAUGE ASSEMBLY – FLAP SKEW SENSOR |
| J27043-18 | CLAMP EQUIPMENT – DRIVE SHAFT, TRAILING EDGE FLAP |
| J27045-1 | SUPPORT EQUIPMENT – FLAPERON |
| J27046-1 | CLAMP EQUIPMENT – LEADING EDGE SLAT DRIVE SHAFT |
| J27047-1 | DRIVE BOLT |
| J27048-14 | REM/INSTL EQPT |
| J27050-1 | WRENCH – COUPLING SLEEVE, FLAP ACTUATION |
| J27051-1 | WRENCH – WING TRAILING EDGE FLAP SUPPORT NUT |
| J27052-1 | ADAPTER |
| J27057-29 | MEASUREMENT EQUIPMENT – BEARING WIDTH |
| J27058-17 | Sleeve |
| J27061-1 | OVERHAUL EQUIPMENT – STABILIZER TRIM ACTUATOR |
| J27072-1 | ADAPTER – TEST, SPOILER AUXILIARY RETRACTION DEVICE (SARD) SYSTEM |
| J27074-1 | SPANNER WRENCH |
| J27076-10 | TEST ASSY |
| J27076-11 | TEST EQPT |
| J27076-5 | TEST EQPT |
| J27076-6 | ADAPTER ASSY |
| J27078-1 | DRIVE ADAPTER EQUIPMENT – ACTUATOR, HORIZONTAL STABILIZER TRIM |
| J27079-38 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY |
| J27079-47 | Suction Cup Assy |
| J27079-57 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY |
| J27081-1 | RIGGING EQPT |
| J27083-1 | ADAPTER CABLE – TESTER, FLAP SKEW SENSOR |
| J27084-72 | TEST EQUIPMENT – TRAILING EDGE FLAP TRANSMISSION, NO-BACK BRAKE OPERATION TEST |
| J27084-79 | TEST EQUIPMENT – TRAILING EDGE FLAP TRANSMISSION, NO-BACK BRAKE OPERATION TEST |
| J27093-1 | TOOL |
| J27096-1 | FLAPERON RIGGING ASSEMBLY – SECTION 13 |
| J27126-1 | RIGGING TOOL |
| AILERON | |
| J28002-13 | DEFUELING FITTING - MAIN |
| AND OVERRIDE PUMP | |
| J28006-1 | SEALING TOOL – RIVET, FUEL TANK |
| J28007-1 | PRESSURIZATION EQPT |
| J28007-11 | ADAPTER ASSY |
| J28008-1 | BLANKING EQUIPMENT – INHIBIT, FUEL SYSTEM |
| J28010-113 | Elbow |
| J28010-13 | ELBOW |
| J28010-138 | TUBE ASSY |
| J28010-154 | CONSOLE EQUIPMENT |
| J28010-26 | CONSOLE EQPT |
| J28012-1 | DRAIN HOSE |
| J28012-13 | B777 CENTER FUEL TANK SUMP DRAIN FITTING TOOL |
| J28012-2 | HOSE ASSY |
| J28013-1 | B777 DRAIN FITTING FUEL SYSTEM |
| J28013-2 | FITTING ASSY |
| J28014-1 | ADAPTER EQUIPMENT - FUEL SUMP DRAIN VLAVE |
| J28015-1 | TEST EQUIPMENT – LEAK AND PRESSURE, AUXILIARY TANK FUEL LINE SHROUD |
| J28017-1 | ADAPTER EQUIPMENT – DRY BAY PRESSURIZATION, WING |
| J28017-10 | TOOL |
| J29002-1 | REMOVAL/INSTALLATION EQUIPMENT – RAM AIR TURBINE |
| J29003-72 | HOIST ADAPTOR |
| J29003-85 | HOIST ADAPTER |
| J29003-93 | HOIST ADAPTER - ADU |
| REMOVAL/INSTL | |
| J29006-1 | BLEEDER HOSE EQUIPMENT – HYDRAULIC SYSTEM |
| J29007-1 | TOOL |
| J29007-2 | TOOL |
| J29007-3 | TOOL |
| J32001-35 | THUMB SCREW |
| J32001-63 | TOOL |
| J32001-64 | TOOL |
| J32001-67 | MEASURING EQUIPMENT – BRAKE PEDAL |
| J32001-68 | SPL-11464 EQUIPMENT |
| J32002-104 | Hand knob |
| J32002-120 | SLING EQUIPMENT – DRAG AND SIDE STRUT REMOVAL/ INSTALLATION, MAIN LANDING GEAR |
| J32002-14 | DRAG STRUT SADDLE ASSY |
| J32002-16 | SIDE STRUT SADDLE ASSY |
| J32002-2 | DRAG STRUT CENTER SADDLE ASSY |
| J32002-3 | SIDE STRUT CENTER SADDLE ASSY |
| J32002-40 | TOOL |
| J32002-43 | 3001 BLOCK ASSY |
| J32002-44 | 3003 BLOCK ASSY |
| J32002-45 | 4001 BLOCK ASSY |
| J32002-46 | 4003 BLOCK ASSY |
| J32002-6 | LARGE PIN ASSY |
| J32002-60 | SLING EQPT-DRAG AND SIDE STRUT,MLG |
| J32002-61 | SLING EQPT-DRAG AND SIDE STRUT,MLG |
| J32002-62 | SADDLE ASSY |
| J32002-63 | PIN AND STRAP ASSY |
| J32002-64 | DRAG STRUT THREAD PROTECTOR |
| J32002-65 | SIDE STRUT THREAD PROTECTOR |
| J32002-66 | 3001 BLOCK ASSY |
| J32002-73 | SLING EQPT-DRAG AND SIDE STRUT,MLG |
| J32002-98 | SLING EQUIPMENT – DRAG AND SIDE STRUT REMOVAL/ INSTALLATION, MAIN LANDING GEAR |
| J32004-21 | PULLER EQUIPMENT – TRUNNION PIN – NOSE LANDING GEAR |
| J32004-22 | PULLER EQUIPMENT – TRUNNION PIN – NOSE LANDING GEAR |
| J32004-23 | PULLER EQUIPMENT – TRUNNION PIN – NOSE LANDING GEAR |
| J32004-24 | Puller Assy |
| J32004-26 | Hammer Assy |
| J32005-19 | PULLER EQUIPMENT – TRUNNION PIN, NOSE LANDING GEAR, UPPER DRAG STRUT |
| J32005-21 | TOOL |
| J32007-1 | PROTECTOR EQPT |
| J32007-2 | THREAD PROTECTOR |
| J32007-3 | AXLE PTOTECTOR |
| J32008-1 | PULLER EQPT |
| J32008-31 | RMVL EQPT |
| J32008-74 | RMVL EQPT |
| J32008-88 | Puller eqpt-brake system pins, main landing gear |
| J32009-29 | REPLACEMENT EQPT |
| J32009-45 | REPLACEMENT EQPT |
| J32009-49 | REPLACEMENT EQUIPMENT – NOSE LANDING GEAR LOWER SEALS |
| J32010-106 | PULLER EQUIPMENT |
| J32010-107 | PULLER EQUIPMENT |
| J32010-110 | PULLER EQUIPMENT - BRAKE SLEEVES, MAIN LANDING GEAR AXLES |
| J32010-62 | PULLER EQUIPMENT |
| J32011-3 | DOWNLOCK ASSY-MLG |
| J32011-4 | DOWNLOCK ASSY-NLG |
| J32011-7 | DOWNLOCK ASSY-NLG |
| J32012-18 | PULLER EQUIPMENT |
| J32012-19 | PLUG ASSY |
| J32013-1 | ADJUSTMENT EQPT |
| J32014-116 | REPLACEMENT EQUIPMENT – LOWER BEARING SEALS, MAIN LANDING GEAR |
| J32015-1 | RIGGING EQUIPMENT – NOSE LANDING GEAR “NOT COMPRESSED” SENSORS |
| J32016-9 | PULLER, PIN – RETRACT ACTUATOR, MAIN LANDING GEAR |
| J32017-18 | SLING ASSEMBLY – ACTUATOR, MAIN LANDING GEAR DOOR |
| J32018-14 | Adjustment eqpt-downlock stop MLG side & drag struts |
| J32018-19 | ADJUSTMENT EQUIPMENT – DOWNLOCK STOP, MAIN LANDING GEAR SIDE AND DRAG STRUTS |
| J32018-28 | TOOL |
| J32019-59 | SLING EQPT |
| J32019-61 | HOOK ACTUATOR CLAMP ASSY |
| J32019-97 | SLING EQPT |
| J32020-1 | SLING,ACTUATORS |
| J32020-10 | SLING – STEERING AND TRUCK POSITIONER ACTUATORS, MAIN LANDING GEAR |
| J32020-14 | SLING – STEERING AND TRUCK POSITIONER ACTUATORS, MAIN LANDING GEAR |
| J32020-15 | SLING – STEERING AND TRUCK POSITIONER ACTUATORS, MAIN LANDING GEAR |
| J32025-1 | HOIST ADAPTER EQUIPMENT – NLG DRAG STRUT, REMOVAL/INSTALLATION |
| J32025-29 | HOIST ADAPTER EQUIPMENT – NLG DRAG STRUT, REMOVAL/INSTALLATION |
| J32026-1 | SLING EQUIPMENT – HANDLING, NOSE LANDING GEAR |
| J32027-47 | HOIST EQPT |
| J32027-63 | HOIST EQPT |
| J32028-1 | LOCK PIN EQPT |
| J32028-2 | PIN ASSY,NLG |
| J32028-3 | PIN ASSY,MLG |
| J32030-44 | DOLLY – TRANSPORTATION, NOSE LANDING GEAR |
| J32031-12 | PROTECTOR EQPT-MAIN LANDING GEAR |
| J32031-13 | THREAD PROTECTOR ASSY |
| J32031-3 | AXLE PROTECTOR ASSY |
| J32032-19 | TOOL |
| J32032-22 | WRENCH EQPT |
| J32032-23 | WRENCH |
| J32032-3 | SLEEVE |
| J32032-4 | SUPPORT ROD ASSY |
| J32034-1 | TURNBUCKLE EQPT |
| J32036-27 | RMVL/INSTL EQPT |
| J32036-55 | RMVL/INSTL EQPT |
| J32036-56 | RMVL/INSTL EQPT |
| J32036-57 | RMVL/INSTL EQPT |
| J32036-75 | REMOVAL/INSTALLATION EQUIPMENT – AFT TRUNNION PIN, MAIN LANDING GEAR |
| J32037-106 | SPRING RMVL/INSTL EQPT |
| J32037-122 | SPRING RMVL/INSTL EQPT |
| J32037-138 | SPRING REMOVAL/INSTALLATION EQUIPMENT – MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) |
| J32037-139 | SPRING REMOVAL/INSTALLATION EQUIPMENT – MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) |
| J32037-165 | TOOL |
| J32037-93 | UPPER SPRING FITTING ASSY |
| J32037-94 | LOWER SPTING FITTING ASSY |
| J32038-13 | INBD PULLER ROD |
| J32038-42 | RMVL/INSTL EQPT |
| J32038-52 | RMVL/INSTL EQPT |
| J32038-53 | RMVL/INSTL EQPT |
| J32042-19 | Thread Protector |
| J32042-20 | Thread Protector |
| J32042-21 | TOOL |
| J32042-22 | TOOL |
| J32042-23 | TOOL |
| J32042-24 | TOOL |
| J32042-26 | TOOL |
| J32042-27 | Thread Protector |
| J32042-29 | TOOL |
| J32042-63 | TOOL |
| J32042-74 | TOOL |
| J32042-78 | TOOL |
| J32042-83 | TOOL |
| J32042-89 | Wrench kit-landing gear |
| J32043-116 | TOWER ASSY |
| J32043-119 | LIFT LUG EQPT |
| J32043-124 | SLING EQPT |
| J32043-125 | SLING EQPT |
| J32043-141 | TOWER ASSY |
| J32043-149 | LIFT BODY |
| J32043-151 | SLING EQPT |
| J32043-175 | EQUIPMENT – MAIN LANDING GEAR, REMOVAL AND INSTALLATION |
| J32043-176 | EQUIPMENT – MAIN LANDING GEAR, REMOVAL AND INSTALLATION |
| J32048-25 | HANDING EQPT |
| J32048-5 | Lwr support assy |
| J32048-52 | HANDING EQPT |
| J32048-53 | HANDING EQPT |
| J32048-55 | STRAP ASSY |
| J32048-56 | CAM BUCKLE STRAP ASSY |
| J32048-57 | STRAP ASSY |
| J32052-1 | EXTENSION BAR – FUNCTIONAL TEST, NOSE LANDING GEAR STEERING |
| J32052-4 | TOOL |
| J32054-116 | TOOL |
| J32054-117 | EQUIP MLG/NLG INNER |
| J32054-118 | Upper assy，MLG |
| J32054-50 | TETAINER EQPT |
| J32054-51 | TETAINER EQPT |
| J32054-56 | LOWER ASSY,MLG |
| J32054-61 | RETAINER ASSY,NLG |
| J32054-91 | TETAINER EQPT |
| J32054-92 | TETAINER EQPT |
| J32055-1 | TORQUE ADAPTER SET – LANDING GEAR COMPONENTS |
| J32055-3 | TORQUE ADAPTER SET – LANDING GEAR COMPONENTS |
| J32055-50 | TORQUE ADAPTER SET |
| J32055-61 | TORQUE ADAPTER SET – LANDING GEAR COMPONENTS |
| J32055-81 | TORQUE ADAPTER SET – LANDING GEAR COMPONENTS |
| J32055-82 | TORQUE ADAPTER SET – LANDING GEAR COMPONENTS |
| J32060-1 | DRAIN EQPT |
| J32061-2 | TOOL |
| J32062-1 | TRANSPORTATION EQPT |
| J32062-26 | TOOL |
| J32063-1 | LOCATING EQUIPMENT – UPLOCK ROLLER, MAIN LANDING GEAR DOOR |
| J32065-1 | ALIGNMENT PIN, MAIN LANDING GEAR TOW FITTING |
| J32065-7 | ALIGNMENT PIN – MAIN LANDING GEAR TOW FITTING |
| J32071-10 | LOCKOUT PIN-FWD & AFT LOCK LINK,RETR TAIL SKID |
| J32072-35 | REMOVAL EQUIPMENT |
| J32072-39 | EXTRACTOR ASSY |
| J32072-50 | REMOVAL EQUIPMENT – DYNAMIC SEAL, NOSE LANDING GEAR AND MAIN LANDING GEAR |
| J32073-13 | POSITION ASSY |
| J32073-21 | HOIST EQUIPMENT |
| J32073-3 | POSITIONER WRENCH ASSY |
| J32073-4 | WRENCH BAR |
| J32076-1 | RMVL SLING EQPT |
| J32076-13 | RMVL SLING EQPT |
| J32077-67 | TRANSPORTATION DOLLY EQUIPMENT – STRUT ASSEMBLY/INNER CYLINDER MAIN LANDING GEAR |
| J32078-1 | DOLLY – TRANSPORTATION, TRUCK BEAM ASSEMBLY, MAIN LANDING GEAR |
| J32082-7 | Puller Assy |
| J32082-73 | REPLACEMENT EQUIPMENT – LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) |
| J32082-98 | REPLACEMENT EQUIPMENT – LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) |
| J32084-1 | SHOCK STRUT EQPT |
| J32085-10 | WRENCH ASSY |
| J32085-11 | WRENCH ASSY |
| J32085-12 | WRENCH ASSY |
| J32085-13 | WRENCH ASSY |
| J32085-14 | Thread protector |
| J32085-15 | Thread protector |
| J32085-16 | Thread protector |
| J32085-17 | Thread protector |
| J32085-18 | Thread protector |
| J32085-19 | Thread protector |
| J32085-20 | Thread protector |
| J32085-21 | Thread protector |
| J32085-23 | Thread protector |
| J32085-29 | Socket |
| J32085-30 | Open End Wrench |
| J32085-31 | SOCKET |
| J32085-34 | 3 1/4-Inch Socket |
| J32085-37 | Thread protector |
| J32085-38 | Thread protector |
| J32085-39 | Thread protector |
| J32085-64 | WRENCH ASSY |
| J32085-68 | Thread protector |
| J32085-69 | Thread protector |
| J32085-76 | WRENCH KIT |
| J32085-77 | WRENCH KIT |
| J32085-8 | WRENCH |
| J32085-88 | KIT WRENCH MLG/NLG |
| J32085-89 | WRENCH,FOR MAIN & NOSE LANDING GEARS |
| J32085-9 | WRENCH ASSY |
| J32087-1 | TURNBUCKLE EQUIPMENT – SHOCK STRUT, MAIN LANDING GEAR |
| J32090-17 | SPRING RMVL/INSTL EQPT |
| J32090-53 | SPRING RMVL/INSTL EQPT |
| J32090-69 | SPRING RMVL/INSTL EQPT |
| J32090-70 | SPRING RMVL/INSTL EQPT |
| J32093-1 | RMVL/INSTL EQPT |
| J32095-1 | GAUGE, MISMATCH |
| J32096-1 | BLEED HOSE – BRAKE |
| J32108-16 | VALVE |
| J34002-18 | TEST FIXTURE-ANGLE OF ATTACK |
| J34002-19 | TEST FIXTURE-ANGLE OF ATTACK |
| J34002-34 | TOOL |
| J34002-35 | TOOL |
| J36001-119 | PRECOOLER EQUIPMENT – REMOVAL/INSTALL, ROLLS ROYCE TRENT 800 |
| J36006-1 | REMOVAL/INSTALLATION EQUIPMENT – PRECOOLER, GE90 ENGINE |
| J36009-1 | PRESSURE TEST EQUIPMENT – DUCT ASSEMBLY |
| J36020-1 | REMOVAL/INSTALLATION EQUIPMENT – PRECOOLER, GE90 ENGINES |
| J36026-1 | TOOL |
| J36026-6 | BLANKING-PLATE - PRSOV |
| J38001-16 | PRESSURIZATION EQPT |
| J38001-20 | AVIATION TOOL |
| J38003-1 | WATER AND WASTE TANK REMOVAL AND INSTALLATION TOOL |
| J38004-247 | PUMP EQUIPMENT – VACUUM LAVATORY SYSTEM |
| J38004-287 | TOOL |
| J41004-9 | TOOL |
| J45002-1 | ADAPTER CABLE – PORTABLE MAINTENANCE ACCESS TERMINAL (PMAT) TO RJ-45 |
| J46001-1 | ALIGNMENT FIXTURE |
| J47125 | POSITIONING PIN NON-TPIS KIT (EV NLG) |
| J47200 | SUPPORT |
| J47201 | TOOL |
| J47548 | PROTECTOR |
| J47548-1 | CONE |
| J47548-2 | SCREW |
| J47549 | ADAPTER |
| J47554 | GUIDE CONE |
| J47555 | EXTRACTOR |
| J47556 | EXTRACTOR |
| J47557 | GUIDE CONE |
| J47558 | EXTRACTOR |
| J47560 | GUIDE CONE |
| J47561 | EXTRACTOR |
| J47562-1000 | EXTRACTOR |
| J47563 | EXTRACTOR |
| J47564 | WRENCH |
| J47565 | TOOL |
| J47566 | TOOL |
| J47587 | GUIDE CONE |
| J47588 | GUIDE CONE |
| J47750 | WRENCH |
| J47779 | PROTECTIVE CONE |
| J47893 | TOOL |
| J47999 | GUIDE CONE |
| J49001-9 | BALLAST – FISHPOLE INSTALLATION, APU GENERATOR REMOVED |
| J49002-29 | SLING-APU |
| J49003-43 | CABLE HOIST EQPT |
| J49003-47 | CHAIN HOIST EQPT |
| J49006-67 | CRADLE |
| J49007-29 | DOLLY, TRANSPORTATION – APU |
| J51001-1 | BARRIER |
| J51002-7 | PLATFORM – SERVICE, FORWARD APU FIREWALL |
| J51003-59 | STATIC BALANCE EQUIPMENT – FLIGHT CONTROL SURFACES |
| J51004-1 | VACUUM GENERATOR TEST EQUIPMENT |
| J51005-1 | INSTL/REMOVAL ADAPTER |
| J51005-7 | INSTL/REMOVAL ADAPTER |
| J52001-34 | HOLD OPEN EQUIPMENT – PASSENGER ENTRY DOOR |
| J52002-1 | SLING EQUIPMENT – BULK CARGO DOOR |
| J52003-1 | BARRIER,DOOR 112AL |
| J52003-2 | BARRIER,DOOR 117AL |
| j52009-103 | BARRIER ASSY |
| J52009-109 | BARRIER |
| J52009-111 | BARRIER ASSY |
| J52009-149 | BARRIER – PASSENGER ENTRY DOORS |
| J52009-55 | BARRIER ASSY |
| J52009-68 | FRAME ASSY |
| J52009-69 | LOCK ASSY,AFT |
| J52009-70 | TOOL |
| J52011-1 | LARGE CARGO DOOR SAFETY BARRIER EQPT |
| J52011-11 | NET ASSY,SCD |
| J52011-12 | STRAP ASSY,SCD |
| J52011-13 | LOWER TUBE,SCD |
| J52011-14 | UPPER TUBE,SCD |
| J52011-2 | SMALL CARGO DOOR SAFETY BARRIER EQPT |
| J52013-1 | TOOL KIT, CARGO DOOR RIGGING ADJUSTMENT |
| J52014-1 | RIGGING SIMULATOR – ESCAPE SLIDE, PASSENGER DOOR |
| J52020-1 | BARRIER |
| J52020-1 | TOOL |
| J52021-1 | SCREW EQUIPMENT – SAFETY, PASSENGER DOOR COUNTERBALANCE SPRING |
| J52024-23 | TEST EQUIPMENT – LATCH ASSEMBLY, BLOW OUT DOORS |
| J52024-24 | TEST EQUIPMENT – LATCH ASSEMBLY, BLOW OUT DOORS |
| J52025-1 | SPRING HOLDER EQPT |
| J52026-1 | COMPRESSION EQUIPMENT – BULK CARGO DOOR COUNTERBALANCE SPRING |
| J52027-1 | TEST BOX – CONNECTOR, SQUIB |
| J52032-39 | SLING – MAIN DECK CARGO DOOR |
| J52037-1 | SWITCH ACTUATOR |
| J52039-1 | PERSONNEL BARRIER EQPT |
| J52039-103 | TOOL |
| J52039-2 | PERSONNEL BARRIER EQPT |
| J52039-4 | STRAIGHT FITTING ASSY |
| J52039-87 | PERSONNEL BARRIER EQPT |
| J52039-88 | PERSONNEL BARRIER EQPT |
| J52039-90 | PERSONNEL BARRIER EQPT |
| J52039-91 | PERSONNEL BARRIER EQPT |
| J52039-92 | PERSONNEL BARRIER EQPT |
| J52041-1 | GAGE – GO/NO-GO, FORWARD CARGO DOOR RIGGING ADJUSTMENT TOOL |
| J53001-1 | LADDER EQUIPMENT – EMPENNAGE ACCESS, VERTICAL FIN |
| J53001-12 | PLATE ASSY |
| J53001-13 | PLATE ASSY |
| J53002-1 | ACCESS LADDER – HORIZONTAL STABILIZER |
| J53003-235 | MAINTENANCE PLATFORM EQUIPMENT – PRESSURE BULKHEAD ACCESS |
| J53003-236 | MAINTENANCE PLATFORM EQUIPMENT – PRESSURE BULKHEAD ACCESS |
| J53004-1 | WRENCH SET |
| J53005-1 | REMOVAL/INSTALLATION EQUIPMENT – RIGID CARGO BARRIER |
| J54001-73 | STRUT UNLOAD SLING |
| J54001-74 | BASE PLATE ASSY |
| J54001-75 | BASE PLATE ASSY |
| J54001-76 | BASE PLATE ASSY |
| J54001-92 | STRUT UNLOAD SLING |
| J54001-93 | STRUT UNLOAD SLING |
| J54001-94 | STRUT UNLOAD SLING |
| J54003-2 | STRUT SLING EQPT,RR |
| J54003-50 | SLING EQUIPMENT – REMOVAL/INSTALLATION, ENGINE STRUTS |
| J54004-131 | REMOVAL/INSTALLATION EQUIPMENT – AFT STRUT FAIRING |
| J54004-62 | REMOVAL/INSTALLATION EQUIPMENT - AFT STRUT FAIRING |
| J54005-32 | HOIST ADAPTER – DIAGONAL BRACE, REMOVE/INSTALL |
| J54005-51 | HOIST ADAPTER – DIAGONAL BRACE, REMOVE/INSTALL |
| J54007-26 | TOOL |
| J54007-52 | REMOVAL/INSTL KIT |
| J54007-53 | REMOVAL/INSTL KIT |
| J54007-54 | REMOVAL/INSTL KIT |
| J54007-55 | REMOVAL/INSTL KIT |
| J54007-56 | REMOVAL/INSTL KIT |
| J54009-25 | SLING EQPT |
| J54016-1 | PLATFORM – AFT STRUT FAIRING REMOVAL/INSTALLATION |
| J55002-1 | LOCK ASSY |
| J55002-36 | LOCK ASSY |
| J55002-37 | TEST EQPT |
| J55002-53 | LOCK ASSEMBLY – HORIZONTAL STABILIZER |
| J55002-59 | LOCK ASSEMBLY – HORIZONTAL STABILIZER |
| J55003-9 | REMOVAL/INSTALLATION EQUIPMENT – HINGE PIN, HORIZONTAL STABILIZER |
| J55004-35 | JACKING EQPT |
| J55005-32 | SLING EQPT |
| J55006-114 | TORQUE EQUIPMENT |
| J56001-1 | PROTECTIVE COVER – MAINTENANCE ACCESS TERMINAL (MAT) |
| J57003-1 | SLING EQPT |
| J57003-16 | SLING EQUIPMENT – RAKED WING TIP INSTALLATION AND REMOVAL |
| J71001-12 | TOOL |
| J71001-46 | EXTRA LONG CABLE ASSY |
| J71001-47 | SHORT CABLE ASSY |
| J71001-48 | LONG CABLE ASSY |
| J71001-61 | STRAP ASSY |
| J71001-62 | TOOL |
| J71001-63 | SLING EQUIPMENT |
| J71001-66 | SLING EQUIPMENT |
| J71001-94 | TOOL |
| J71002-57 | TORQUE EQPT |
| J71002-58 | RATCHET RETAINER ASSY |
| J71002-60 | CABLE ASSY |
| J71002-75 | TORQUE EQPT |
| J71002-95 | TORQUE EQUIPMENT – ENGINE MOUNT BOLT GE90 |
| J71003-153 | BOOTSTRAP EQPT |
| J71003-154 | FWD ARM ASSY |
| J71004-10 | DRIFT PIN ASSY |
| J71004-2 | SLING ASSY |
| J71004-24 | Sling - Fan Cowl |
| J71004-4 | LWR STRAP ASSY |
| J71004-5 | UPR STRAP ASSY |
| J71004-9 | SLING-FAN COWL |
| J71005-84 | BOOTSTRAP EQUIPMENT – PRATT AND WHITNEY ENGINES |
| J71007-89 | TORQUE EQUIPMENT – MOUNT BOLTS, PW ENGINES |
| J71008-1 | TORQUE EQUIPMENT – ROLLS ROYCE, TRENT, ENGINE MOUNT |
| J71008-15 | TORQUE EQUIPMENT – ROLLS ROYCE, TRENT, ENGINE MOUNT |
| J71008-8 | TORQUE EQUIPMENT – ROLLS ROYCE, TRENT, ENGINE MOUNT |
| J71009-18 | Pin Assy |
| J71009-19 | Pin Assy |
| J71009-20 | TOOL |
| J71009-28 | Pin |
| J71009-68 | BOOTSTRAP EQUIPMENT – TRENT 800 ENGINE |
| J71009-69 | BOOTSTRAP EQUIPMENT – TRENT 800 ENGINE |
| J71013-25 | ADAPTER EQUIPMENT – STABILIZATION, PRATT & WHITNEY ENGINE MOUNT |
| J71013-44 | ADAPTER EQUIPMENT – STABILIZATION, PRATT & WHITNEY ENGINE MOUNT |
| J71015-28 | SLING EQUIPMENT – FAN COWL SUPPORT BEAM, PW AND GE90 ENGINES |
| J71019-1 | STABILIZATION EQUIPMENT – ENGINE MOUNTS, ROLLS ROYCE TRENT |
| J71019-2 | STABILIZATION EQUIPMENT – ENGINE MOUNTS, ROLLS ROYCE TRENT |
| J71030-1 | UNLOCK POLE – FAN COWL HOLD OPEN RODS |
| J71031-18 | ALIGNMENT/THREAD PROTECTOR EQUIPMENT – THRUST LINK, ROLLS ROYCE ENGINE |
| J71031-19 | ALIGNMENT/THREAD PROTECTOR EQUIPMENT – THRUST LINK, ROLLS ROYCE ENGINE |
| J71032-1 | MAT – PROTECTIVE, ENGINE INLET, GE, PW AND RR |
| J71032-11 | MAT – PROTECTIVE, ENGINE INLET, GE, PW AND RR |
| J71032-15 | MAT - PROTECTIVE, ENGINE INLET |
| J71033-109 | HOLD OPEN EQUIPMENT – FAN COWL, TRENT 800 |
| J71037-1 | ADAPTER ASSEMBLY – STABILIZATION, ROLLS ROYCE AFT ENGINE MOUNT |
| J71038-1 | STAND |
| J71038-2 | STAND ASSEMBLY – STORAGE, INLET ASSEMBLY |
| J71038-70 | STAND ASSEMBLY |
| J71039-1 | TOOL |
| J71039-155 | GUARD – INLET, ENGINE RUNUP SAFETY |
| J71043 | BOOTSTRAP EQPT-GE90 ENGINE |
| J71043-102 | TOOL |
| J71043-119 | BOOTSTRAP EQUIPMENT - GE90 ENGINE |
| J71043-129 | BOOTSTRAP EQPT |
| J71043-130 | BOOTSTRAP EQPT |
| J71043-131 | BOOTSTRAP EQPT |
| J71043-131-GE90 | ENGINE CHANGE KIT |
| J71043-63 | SHEAVE ASSY |
| J71043-94 | BOOTSTRAP EQPT |
| J71047-93 | STORAGE CART – SUPPORT EQUIPMENT |
| J71063-1 | LATCHING TOOL – ENGINE FAN COWL |
| J71063-15 | LATCH TOOL |
| J76002-1 | WRENCH – SPANNER, THRUST LEVER CONTROL, STAND SHAFT ASSEMBLY |
| J78002-97 | SLING EQUIPMENT – PRATT AND WHITNEY FAN THRUST REVERSER |
| J78003-27 | HOLD OPEN EQPT |
| J78004-123 | SLING EQUIPMENT – GE90 FAN THRUST REVERSER |
| J78004-124 | TOOL |
| J78004-125 | TOOL |
| J78004-89 | SLING EQPT-FAN REVERSER |
| J78004-90 | HINGE FITTINGS |
| J78005-1 | THREAD PROTECTOR EQPT |
| J78005-10 | THREAD PROTECTOR EQPT |
| J78005-3 | THREAD PROTECTOR EQPT |
| J78006-11 | HOLD OPEN EQUIPMENT – THRUST REVERSER, ROLLS ROYCE TRENT 800 |
| J78007-58 | RMVL/INSTL EQPT |
| J78007-65 | ADJ HANDLE ASSY |
| J78007-74 | RMVL/INSTL EQPT |
| J78007-85 | RMVL/INSTL EQPT |
| J78015-1 | SLING EQPT |
| J78015-77 | LIFTING EQPT |
| J78015-96 | ARM ATTACHMENT EQPT |
| J78015-97 | ARM ATTACHMENT EQPT |
| J78017-59 | SLING EQUIPMENT – ROLLS ROYCE FAN THRUST REVERSER |
| J78022-60 | HOLD OPEN EQUIPMENT – THRUST REVERSER PRATT AND WHITNEY ENGINES |
| J78023-102 | STAND – TRANSPORTATION, PRATT AND WHITNEY FAN THRUST REVERSER |
| J78028-1 | WRENCH – EXTENDED, THRUST REVERSER T-BOLT LATCH |
| J78031-140 | TOOL |
| J78031-146 | TOOL |
| J78031-85 | STAND – TRANSPORTATION/WORK, GE90 THRUST REVERSER |
| J78035-1 | HOLD OPEN EQUIPMENT – ROLLS ROYCE THRUST REVERSER, THERMAL BLANKET REMOVAL/INSTALLATION |
| J8031-85 | TOOL |
| JMP/CF34/D/6000 | PROBE |
| JMP/CF34/D/6553 | ENGINE COMPRESSOR WASHING |
| JMP/TRENT/D/4702 | WASHING PROBES |
| JMP-CF34-D-6553 | ENGINE COMPRESSOR WASHING RIG PROBE |
| JX-BHM | TOOL |
| JXHK-08-27 | rain proof type Engine cleaning device |
| JXHK-CL-02-PQ02 | the connotation hook gun（use for CFM56-5B） |
| JXHK-CL-02-PQ03 | Connotation hook gun |
| use for CFM56-7B | |
| JXHK-CL-02-PQ04 | the connotation hook gun（use for V2500-A5） |
| JXHK-CL-02-PQ11 | the connotation hook gun（use for LEAP-1A） |
| JXHK-GB-1219 | GROUND POWER CART-Hydraulic Ground |
| Power Unit (3500psi) | |
| JXHK-GB-1230 | 65T JACK, AXLE(T-type with air pump |
| JXHK-GB-1255 | 50T Axle Jack(portable， manual） |
| JXHK-GB-1265 | TOOL |
| JXHK-GB-1290 | AXLE JACK -90 TON(T-type with air pump,Alt:RT9050-001) |
| JXHK-GB-1292 | TOOL |
| JXHK-GB-1345 | 45T Axle Jack(T-type with air pump) |
| JXHK-GB-1356 | 50T Axle Jack(portable， manual，generic version） |
| JXHK-GB-1360 | 60T Axle Jack(T-type with air pump) |
| JXHK-GB-1773 | TOOL |
| JXHK-GB-1775 | LEAP ENGINE PROBE/CFM LEAP(A:JMP/LEAP/D/7028) |
| JXHK-GB-1776 | NOSE JACK(A320/B737 15T) |
| JXHK-GB-1778 | MAIN / WING JACK(A320/B737 40T) |
| JXHK-GB-1780 | SAFETY / TAIL JACK(A320/B737 15T) |
| JXHK-GB-1795 | NOSE JACK (SSJ100 SWL 10T) |
| JXHK-GB-1797 | MAIN/WING JACK(SSJ100 |
| SWL20T) | |
| JX-LTCQ-737 | TOOL |
| JX-LTCQ-A320 | TOOL |
| JX-ZZJ-28 | TOOL |
| JX-ZZJ-29 | TOOL |
| JX-ZZJ-30 | TOOL |
| K05001-1 | EXTENSION CABLE – BRAKE RELEASE, MAIN LANDING GEAR |
| K07001-14 | EMERGENCY JACKING EQUIPMENT – MAIN LANDING GEAR |
| K07001-18 | EMERGENCY JACKING EQUIPMENT – MAIN LANDING GEAR |
| K07003-15 | JACK FITTING |
| K07004-1 | JACK FITTING EQPT |
| K07005-1 | JACK FITTING EQPT |
| K07006-1 | SLING EQUIPMENT – LIFTING/TETHERING AIRPLANE RECOVERY |
| k10001-1 | PROTECTIVE COVER-WHEEL/TIRE/BRAKE,MLG & NLG |
| K10001-2 | PROTECTIVE COVER-WHEEL/TIRE/BRAKE,MLG & NLG |
| K10001-26 | PROTECTIVE COVER – WHEEL/TIRE/BRAKE, MAIN LANDING GEAR AND NOSE LANDING GEAR |
| K10001-27 | TOOL |
| K10003-1 | TETHERING EQUIPMENT – ENGINE PYLON, AIRPLANE RECOVERY |
| K10004-1 | PLUG SET – EXHAUST VENT, THERMAL ANTI-ICING |
| K10005-34 | TETHERING RESTRAINT – ENTRY DOORS |
| K10007-1 | PROTECTIVE COVER |
| K10007-12 | PROTECTIVE COVER-ENGINE INLET,GE GENX |
| K10008-14 | PROTECTIVE PLUG EQUIPMENT – ENGINE EXHAUST, GE GENX |
| K10008-23 | PROTECTIVE PLUG EQUIPMENT – ENGINE EXHAUST, GE GENX |
| K10009-15 | TOOL |
| K10009-3 | TOOL |
| K10009-4 | TOOL |
| K10010-22 | TETHERING EQUIPMENT – INBOARD AND OUTBOARD FLAP SUPPORT |
| K10011-1 | PROTECTIVE COVER – ENGINE INLET, RR TRENT 1000 |
| K10011-2 | TOOL |
| K10012-14 | PROTECTIVE PLUG - ENGINE EXHAUST, RR |
| K10012-15 | TOOL |
| K10013-15 | PROTECTIVE PLUG - ENGINE FAN AIR EXHAUST, RR |
| K10013-16 | TOOL |
| K10013-17 | TOOL |
| K12003-1 | FILL TOOL – HYDRAULIC STRUT, SEMI LEVER GEAR STANDARD PRACTICES – AIRFRAME |
| K12004-1 | TOOL |
| K20001-64 | HOIST – FORWARD ELECTRONIC/EQUIPMENT (E/E) BAY LINE REPLACEABLE UNITS (LRU) |
| K20002-1 | TOOL |
| K20002-25 | EQUIPMENT - PERSONNEL, ENGINE STRUT SHOCK ABSORBING LANYARD |
| K20003-49 | Personnel Eqpt – Shock Absorbing Lanyard,Upper Wig |
| K20003-92 | PERSONNEL EQUIPMENT – SHOCK ABSORBING LANYARD, UPPER WING |
| K20004-30 | TOOL |
| K20004-46 | PERSONNEL EQUIPMENT – SHOCK ABSORBING LANYARD, HORIZONTAL STABILIZER |
| K20004-60 | PERSONNEL EQUIPMENT – SHOCK ABSORBING LANYARD, HORIZONTAL STABILIZER |
| K20008-35 | TOOL |
| K20008-55 | HOIST – AFT ELECTRICAL/ELECTRONIC BAY LINE REPLACEABLE UNITS |
| K20009-14 | PIN - RIG, RUDDER PEDAL ARMS |
| K20010-31 | WEB SLING ASSY |
| K20013-1 | REMOVAL/INSTALLATION EQUIPMENT – BATTERY AND BATTERY ENCLOSURE, ELECTRONIC EQUIPMENT BAY |
| K20014-1 | WRENCH |
| K20015-1 | HOIST – BOOM, GENERAL, 1000 LB MAX CAPACITY |
| K20015-2 | HOIST – BOOM, GENERAL, 1000 LB MAX CAPACITY |
| K20015-3 | HOIST – BOOM, GENERAL, 1000 LB MAX CAPACITY |
| K2008-55 | TOOL |
| K21001-1 | INSTALL/REMOVE/TRANSPORT CART – SUPPLEMENTAL COOLING UNIT |
| K21001-79 | INSTALL/REMOVE/TRANSPORT CART – SUPPLEMENTAL COOLING UNIT |
| K21002-62 | TRANSPORT EQUIPMENT – CARGO REFRIGERATION UNIT REMOVAL AND INSTALLATION |
| K21003-1 | INSTALLATION/REMOVAL EQUIPMENT – POWER ELECTRONICS COOLING SYSTEM (PECS) COOLING PUMP |
| K21003-67 | INSTALLATION/REMOVAL EQUIPMENT – POWER ELECTRONICS COOLING SYSTEM (PECS) COOLING PUMP |
| K21004-4 | SLING ASSY |
| K21004-72 | ADAPTER EQPT |
| K21004-73 | ADAPTER ASSY |
| K21004-79 | TOOL |
| K21004-80 | Sling assy |
| K21004-84 | ADAPTER EQUIPMENT – HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION |
| K21004-85 | ADAPTER EQUIPMENT – HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION |
| K21006-46 | JACK ADAPTER |
| K21006-53 | JACK ADAPTER – AIR COMPRESSOR, AIR CONDITIONING PACK |
| K21008-1 | JACK ADAPTER |
| K21010-45 | RAM AIR FAN,AC PACK-JACK ADAPTER |
| K21010-54 | RAM AIR FAN, AIR CONDITIONING PACK – JACK ADAPTER |
| K21011-1 | Adapter equipment-adjustable angle,jack |
| K21011-62 | ADAPTER EQPT |
| K21012-1 | SUPPORT - HOSE, FLUID SERVICE CART |
| K21013-36 | REMOVAL/INSTALLATION EQUIPMENT – FORWARD CARGO AIRCONDITIONING (FCAC) PUMP |
| K21014-1 | JACK ADAPTER |
| K21016-129 | ADAPTER KIT - CTOP - POWER ELECTRONICS COOLANT SYSTEM SERVICING |
| K21016-130 | ADAPTER KIT - CSC AND C-TOP CART, POWER ELECTRONICS COOLING SYSTEM |
| K21016-136 | SUPPLEMENT CSC ADAPTER KIT |
| K21018-1 | DISPATCH EQUIPMENT – BYPASS ASSEMBLY, GALLEY COOLING UNIT AND SUPPLEMENTAL COOLING UNIT |
| K21026-1 | PROTECTIVE SCREEN – RAM AIR INLET, GROUND OPERATIONS |
| K21026-94 | PROTECTIVE SCREEN – RAM AIR INLET, GROUND OPERATIONS |
| K21028-25 | Off Set Wrench, 3/8 Inch, 12 Point Box Head |
| K21029-1 | ADAPTER – JACK, SECONDARY HEAT EXCHANGER |
| K21029-19 | ADAPTER - JACK, SECONDARY HEAT EXCHANGER |
| K21031-1 | TOOL |
| K21031-3 | Alignment Fixture, Quad Heat Exchanger |
| K23001-1 | INSTALLATION TOOL – HF COUPLER |
| K24001-1 | HOIST ADAPTER ASSEMBLY - VFSG & ASG |
| K24001-114 | HOIST ADAPTER ASSY |
| K24001-118 | HOIST ADAPTER ASSY |
| K24001-119 | HOIST ADAPTER ASSEMBLY – VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) |
| K24001-120 | ASG ADAPTERS - HOIST/APU |
| K24001-3 | HOIST ADAPTER ASSEMBLY – VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) |
| K24001-4 | HOIST ADAPTER ASSEMBLY – VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) |
| K24002-1 | DISPATCH EQUIPMENT – MOTOR CONTROLLERS |
| K24002-2 | DISPATCH EQUIPMENT – MOTOR CONTROLLERS |
| K24002-71 | DISPATCH EQUIPMENT – MOTOR CONTROLLERS |
| K24005-94 | HOIST ADAPTER - VFSG, RR ENGINE STAND |
| K24012-1 | DISPATCH KIT – APU STARTER GENERATOR (ASG) |
| K24015-1 | WRENCH - BATTERY ENCLOSURE, EE BAY |
| K25001-1 | LEVER – STOWAGE BIN RELEASE |
| K25002-139 | LIFTING EQUIPMENT – OVERHEAD FLIGHT ATTENDANT REST (OFAR)/OVERHEAD FLIGHT CREW REST (OFCR) MODULE, REMOVAL/INSTALLATION |
| K25003-1 | LIFTING EQUIPMENT – UPPER VESTIBULE MODULE REMOVAL/INSTALLATION |
| K25005-125 | DOLLY EQUIPMENT – OVERHEAD FLIGHT ATTENDANT REST (OFAR)/OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL/INSTALLATION |
| K25007-49 | CART - PASSENGER SEAT |
| K26001-20 | TEST EQUIPMENT |
| K26001-23 | Test Equipment - Fire Exit Tubing, Cargo Compartment |
| K26003-1 | TOOL |
| K26003-35 | TEST EQUIPMENT – ENGINE FIRE EXTINGUISHING SYSTEM |
| K26003-36 | Test Eqpt - Engine Fire Extinguishing System |
| K26003-77 | TEST EQUIPMENT – ENGINE FIRE EXTINGUISHING SYSTEM |
| K26003-78 | Test Eqpt - Engine Fire Extinguishing System |
| K26003-83 | Test eqpt-engine fire extinguishing system |
| K27001-126 | REMOVAL/INSTALLATION EQPT |
| K27002-85 | ADAPTER EQPT |
| K27003-1 | ADAPTER EQPT |
| K27004-156 | HOIST EQPT |
| K27004-157 | LIFTING EQPT |
| K27004-158 | LIFTING EQPT |
| K27006-1 | REMOVAL/INSTALLATION EQUIPMENT – SPOILER ELECTRIC MOTOR ACTUATOR |
| K27007-1 | ADAPTER - DRIVE, HORIZONTAL STABILIZER TRIM ACTUATOR |
| K27008-67 | SLING EQUIPMENT |
| K27009-124 | REMOVAL/INSTALLATION EQUIPMENT – FLAPERON |
| K27011-32 | SUPPORT IB |
| K27011-33 | SUPPORT OB |
| K27011-47 | DISPATCH EQPT - INBD HYDRAULIC SPOILER ACTUATORS |
| K27013-1 | ELECTRICAL COVER |
| K27014-38 | GAP GAGE |
| K27015-24 | LOCK - POWER CONTROL UNIT, AILERON |
| K27016-1 | LOCK - BALL NUT, HORIZONTAL STABILIZER ACTUATOR |
| K27017-22 | LOCK EQUIPMENT |
| K27017-46 | LOCK EQUIPMENT |
| K27019-1 | TOOL |
| K27019-100 | LOCK EQUIPMENT |
| K27019-82 | LOCK EQPT |
| K27019-83 | LOCK EQPT |
| K27019-84 | LOCK EQPT |
| K27019-85 | LOCK EQPT |
| K27019-86 | PAD ASSY |
| K27021-1 | REM/INSTL EQPT |
| K27022-39 | RIGGING EQPT |
| K27023-64 | SLING EQUIPMENTN |
| K27024-25 | SLING EQUIPMENT |
| K27024-59 | SLING EQUIPMENT – INBOARD TRAILING EDGE FLAP, REMOVAL AND INSTALLATION |
| K27025-28 | SLING EQPT |
| K27027-114 | SLING EQPT |
| K27027-214 | SLING EQUIPMENT – REMOVAL/INSTALLATION, INBOARD AND OUTBOARD SLATS |
| K27030-1 | REVOLUTION COUNTER EQPT |
| K27030-50 | SHORT ADAPTER |
| K27030-51 | LONG ADAPTER |
| K27030-78 | REVOLUTION COUNTER & ADAPTER EQPT |
| K27030-95 | SPLINE ADAPTER EQPT |
| K27032-1 | PIN PULLER EQUIPMENT |
| K27036-1 | WRENCH EQUIPMENT – ECCENTRIC BUSHING ADJUSTMENT, TRAILING EDGE FLAPS |
| K27037-1 | Rigging Equipment |
| K27037-10 | TOOL |
| K27037-11 | TOOL |
| K27037-12 | TOOL |
| K27037-13 | TOOL |
| K27037-14 | TOOL |
| K27037-3 | TOOL |
| K27037-4 | TOOL |
| K27037-5 | TOOL |
| K27037-6 | TOOL |
| K27037-77 | RIGGING EQUIPMENT – LEADING EDGE SLAT INSTALLATION |
| K27037-78 | RIGGING EQUIPMENT – LEADING EDGE SLAT INSTALLATION |
| K27037-8 | TOOL |
| K27037-9 | TOOL |
| K27038-1 | LOCK - POWER CONTROL UNIT, RUDDER |
| K27038-36 | LOCK – RUDDER POWER CONTROL UNIT |
| K27038-38 | TOOL |
| K27039-1 | RIGGING EQUIPMENT |
| K27039-15 | RIGGING EQUIPMENT – TRAILING EDGE FLAPS |
| K27039-16 | RIGGING EQUIPMENT – TRAILING EDGE FLAPS |
| K27040-1 | CLAMP EQPT |
| K27041-69 | DOLLY |
| K27044-1 | SUPPORT EQPT-AILERON |
| K27046-15 | LOCK EQPT - ELEVATOR PCU |
| K27046-42 | LOCK EQUIPMENT – ELEVATOR POWER CONTROL UNIT |
| K27046-50 | TOOL |
| K27046-51 | LOCK EQUIPMENT – ELEVATOR POWER CONTROL UNIT |
| K27046-54 | TOOL |
| K27047-1 | RMVL/INSTALLATION EQPT |
| K27048-1 | Dispatch Equipment - Horizontal Stabilizer Trim Actuator |
| K27049-91 | HOIST EQPT-ELECTRONIC MOTOR CONTROLLER HSTA/HSTA |
| K27050-14 | RIGGING EQPT |
| K27051-1 | MEASURING TOOL |
| K27051-10 | MEASURING TOOL |
| K27052-1 | REMOVAL/INSTALLATION EQUIPMENT – TORQUE TUBE, INBOARD TRAILING EDGE FLAP |
| K27054-1 | RIGGING TOOL – ELEVATOR |
| K27056-50 | REMOVAL/INSTALLATION EQUIPMENT – ELEVATOR POWER CONTROL UNIT |
| K27057-10 | WRENCH |
| K27058-1 | RIGGING TOOL |
| K27059-1 | DISPATCH EQUIPMENT |
| K27059-18 | DISPATCH EQUIPMENT – SPOILER ELECTRO MECHANICAL ACTUATOR (SEMA) |
| K27061-1 | EQPT - LOCKOUT, SEMA SPOILER |
| K27062-1 | RIGGING TOOL |
| K27068-1 | MEASURING TOOL – SKEW SENSOR ANGULAR |
| K27068-10 | MEASURING TOOL – SKEW SENSOR ANGULAR |
| K27068-11 | TOOL |
| K27068-12 | TOOL |
| K27068-2 | MEASURING TOOL – SKEW SENSOR ANGULAR |
| K27068-5 | MEASURING TOOL – SKEW SENSOR ANGULAR |
| K27068-6 | MEASURING TOOL – SKEW SENSOR ANGULAR |
| K27068-9 | MEASURING TOOL – SKEW SENSOR ANGULAR |
| K27069-1 | TOOL |
| K28001-1 | SPANNER WRENCH – FUEL SUMP DRAIN VALVE |
| K28002-1 | DRAIN FITTING – FUEL SYSTEM |
| K28002-15 | DRAIN FITTING - FUEL SYSTEM |
| K28002-19 | TOOL |
| K28004-1 | TEST EQPT |
| K28004-30 | TEST EQPT |
| K28005-1 | EQUIPMENT - TEST, VACUUM PRESSURE RELIEF VALVE |
| K28007-1 | BOOST PUMP - R/I TOOL |
| K28008-1 | TOOL |
| K29001-1 | ADAPTER EQUIPMENT – ELECTRIC MOTOR PUMP REMOVAL/ INSTALLATION |
| K29001-5 | ADAPTER EQPT |
| K29001-60 | ADAPTER EQUIPMENT – ELECTRIC MOTOR PUMP REMOVAL/ INSTALLATION |
| K29002-78 | REMOVAL/INSTALLATION EQPT |
| K29003-1 | ADAPTER - EDP SUPPLY HOSE HYDRAULIC |
| K29005-1 | Jumper - RAT Plug Adapter (Dispatch) |
| K31001-1 | TEST SET - P40 RECEPTACLE, AREA MICROPHONE |
| K320004-30 | TOOL |
| K32001-1 | SLING EQUIPMENT |
| K32002-1 | PROTECTOR - AXLE & THREAD, NLG |
| K32002-2 | PROTECTOR EQUIPMENT |
| K32002-3 | PROTECTOR EQUIPMENT |
| K32003-1 | SPRING REMOVAL/INSTALLATION EQUIPMENT – MAIN LANDING GEAR UPLOCK AND MAIN LANDING GEAR DOOR UPLOCK |
| K32004-18 | REMOVAL/INSTALLATION EQUIPMENT – FUSE PIN, MAIN LANDING GEAR FORWARD TRUNNION SUPPORT |
| K32006-1 | HOIST ADAPTER EQUIPMENT – NOSE LANDING GEAR DRAG BRACE REMOVAL/INSTALLATION |
| K32007-1 | SPRING RMVL/INSTL EQPT |
| K32008-102 | WRENCH ASSY |
| K32008-104 | WRENCH ASSY |
| K32008-109 | TOOL |
| K32008-131 | WRENCH KIT |
| K32008-132 | WRENCH KIT |
| K32008-19 | TOOL |
| K32008-2 | WRENCH ASSY |
| K32008-26 | TOOL |
| K32008-27 | TOOL |
| K32008-36 | TOOL |
| K32008-7 | WRENCH KIT |
| K32008-71 | WRENCH KIT |
| K32008-72 | WRENCH ASSY |
| K32008-74 | WRENCH ASSY |
| K32008-75 | WRENCH ASSY |
| K32008-8 | WRENCH ASSY |
| K32008-90 | TOOL |
| K32008-91 | TOOL |
| K320089-133 | TOOL |
| K32008-92 | TOOL |
| K32009-1 | PULLER EQUIPMENT – TRUNNION PIN, NOSE LANDING GEAR ASSEMBLY AND NOSE LANDING GEAR UPPER DRAG BRACE |
| K32009-25 | PULLER EQUIPMENT – TRUNNION PIN, NOSE LANDING GEAR ASSEMBLY AND NOSE LANDING GEAR UPPER DRAG BRACE |
| K32010-1 | DOLLY – TRANSPORTATION, NOSE LANDING GEAR |
| K32011-11 | REPLACEMENT EQPT |
| K32011-2 | REPLACEMENT EQPT |
| K32011-47 | REPLACEMENT EQPT |
| K32011-63 | REPLACEMENT EQUIPMENT – LOWER BEARING SEALS, MAIN LANDING GEAR |
| K32011-64 | REPLACEMENT EQUIPMENT – LOWER BEARING SEALS, MAIN LANDING GEAR |
| K32011-69 | TOOL |
| K32011-90 | REPLACEMENT EOPT-LOWER BEARING SEALS |
| K32011-91 | TOOL |
| K32012-77 | HOIST EQUIPMENT – REMOVAL/INSTALLATION, NOSE LANDING GEAR |
| K32012-98 | HOIST EQUIPMENT – REMOVAL/INSTALLATION, NOSE LANDING GEAR |
| K32013-24 | REMOVAL/INSTALLATION EQUIPMENT – RETRACT ACTUATOR, NOSE LANDING GEAR |
| K32014-1 | REMOVAL/IINSTALLATION EQUIPMENT |
| K32014-12 | TOOL |
| K32015-1 | REPLACEMENT EQUIPMENT – LOWER SEALS, NOSE LANDING GEAR |
| K32015-13 | REPLACEMENT EQPT-LOWER SEALS,NLG |
| K32015-2 | REPLACEMENT EQPT-LOWER SEALS,NLG |
| K32015-5 | REPLACEMENT EQPT-LOWER SEALS,NLG |
| K32015-6 | REPLACEMENT EQPT-LOWER SEALS,NLG |
| K32015-7 | REPLACEMENT EQPT-LOWER SEALS,NLG |
| K32015-8 | REPLACEMENT EQPT-LOWER SEALS,NLG |
| K32016-1 | TURNBUCKLE |
| K32016-20 | TURNBUCKLE – TRUCK POSITION ACTUATOR, MAIN LANDING GEAR |
| K32018-59 | Side strut adjusting eqpt-drag strut lock link assy，MLG |
| K32019-64 | SLING EQPT |
| K32019-91 | Sling eqpt.-Drag & Side |
| K32020-1 | RETAINER EQUIPMENT – MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK |
| K32020-29 | RETAINER EQUIPMENT – MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK |
| K32021-1 | Dispatch eqpt-brake/eba connector covers |
| K32022-1 | WRENCH - AXLE NUT, NLG |
| K32022-2 | WRENCH-NLG WHEEL RETENTION NUT |
| K32023-1 | SHOCK STRUT EQUIPMENT – COMPONENT MAINTENANCE, NOSE LANDING GEAR |
| K32023-2 | TOOL |
| K32023-4 | TOOL |
| K32023-6 | TOOL |
| K32024-1 | SHOCK STRUT EQUIPMENT – COMPONENT MAINTENANCE, MAIN LANDING GEAR |
| K32024-2 | TOOL |
| K32024-3 | TOOL |
| K32024-4 | TOOL |
| K32024-6 | TOOL |
| K32025-1 | REMOVAL/INSTALLATION EQUIPMENT – RETRACT ACTUATOR, MAIN LANDING GEAR DOOR |
| K32027-1 | PUMP-RETRACTION/EXTENSION LANDING GEAR ACTUATOR |
| K32027-106 | PUMP - RETRACTION / EXTENSION LANDING GEAR |
| ACTUATOR | |
| K32028-1 | SPANNER WRENCH – GLAND NUT, MAIN LANDING GEAR AND NOSE LANDING GEAR |
| K32028-2 | SPANNER WRENCH – GLAND NUT, MAIN LANDING GEAR AND NOSE LANDING GEAR |
| K32028-4 | SPANNER WRENCH |
| K32030-1 | SLING EQUIPMENT – HANDLING, NOSE LANDING GEAR |
| K32032-1 | SPANNER WRENCH – STEERING NUT, NOSE LANDING GEAR |
| K32034-1 | TORQUE ADAPTER |
| K32035-1 | REMOVALAND INSTALLATION EQUIPMENT – MAIN LANDING GEAR BOGIE PIVOT PIN |
| K32035-11 | REMOVALAND INSTALLATION EQUIPMENT – MAIN LANDING GEAR BOGIE PIVOT PIN |
| K32036-1 | DISPATCH EQPT |
| K32036-2 | DISPATCH EQPT |
| K32036-21 | DISPATCH EQUIPMENT – AXLE REMOTE DATA CONCENTRATOR (RDC) CONNECTOR COVERS |
| K32036-36 | Dispatch eqpt-axle rdc connector covers |
| K32037-1 | PROTECTOR EQPT-AXLE， MAIN LANDING GEAR/B787-9 |
| K32037-2 | Axle Protector Assy |
| K32037-4 | Thread Protector |
| K32038-62 | PULLER EQUIPMENT – BRAKE SLEEVE, MAIN LANDING GEAR AXLES |
| K32039-1 | PULLER EQUIPMENT – GOODRICH BRAKES, MAIN LANDING GEAR |
| K32040-81 | SLING EQUIPMENT – DRAG AND SIDE BRACE REMOVAL/INSTALLATION, MAIN LANDING GEAR |
| K32040-89 | SLING EQUIPMENT – DRAG AND SIDE BRACE REMOVAL/INSTALLATION, MAIN LANDING GEAR |
| K32042-1 | PULLER EQUIPMENT – WHEEL SLEEVE, MAIN LANDING GEAR AXLE |
| K32044-1 | TEST SUPPORT FIXTURE, TIRE PRESSURE SENSOR (TPS) INSTALLATION |
| K32048-1 | PLATFORM – MAIN LANDING GEAR (MLG) WORK |
| K32051-1 | TOOL |
| K35001-115 | TEST EQUIPMENT – FLOW FUSE, CREW OXYGEN DISTRIBUTION MANIFOLD |
| K35001-116 | Test Equipment - Crew Oxygen Flow Fuse |
| K-3706 | CONNECTOR - HIGH PRESSURE SERVICING |
| K38001-1 | REMOVAL/INSTALLATION EQUIPMENT – VACUUM WASTE TANKS |
| k38002-1 | DISPATCH PLUG – VACUUM WASTE TOILET BOWL |
| K38003-1 | LEAK TEST EQUIPMENT – POTABLE WATER SYSTEM |
| K42004-1 | JUMPER CABLE – POWER, RIGHT COMMON COMPUTING RESOURCE CABINET |
| K47001-116 | REMOVAL/INSTALLATION EQUIPMENT – NITROGEN GENERATION SYSTEM (NGS) AIR SEPARATION MODULE, |
| K47002-40 | TOOL |
| K47003-1 | EQUIPMENT – NITROGEN GENERATION SYSTEM MOTOR DRIVEN COMPRESSOR, REMOVALAND INSTALLATION |
| K49001-7 | THREAD PROTECTOR EQUIPMENT – APU RETENTION BOLTS |
| K49002-1 | HOIST EQUIPMENT – APU STARTER GENERATOR (ASG) |
| K49003-1 | DISPATCH KIT |
| K49004-1 | HOIST EQPT |
| K51002-1 | PLATFORM - SERVICE， FORWARD APU FIREWALL |
| K52002-133 | BARRIER – PASSENGER ENTRY DOORS |
| K52002-90 | BARRIER - PASSENGER |
| K52005-100 | HOLD-OPEN - PASSENGER ENTRY DOOR |
| K52005-99 | HOLD OPEN EQUIPMENT – PASSENGER ENTRY DOOR |
| K52009-1 | BARRIER-BULK CARGO DOOR |
| K52010-1 | COMPRESSION SET |
| K52011-1 | INSTALLATION TOOL – DOOR SEAL |
| K52012-1 | TEST EQUIPMENT – LATCH ASSEMBLY, BLOWOUT DOORS |
| K52014-42 | TOOL KIT |
| K52015-23 | SLING EQUIPMENT – LARGE CARGO DOOR INSTALLATION/ REMOVAL |
| K52016-1 | SAFETY BARRIER - CARGO DOOR, FORWARD OR AFT |
| K52017-1 | BARRIER - SERVICE ACCESS DOOR, SECTION 48 |
| K52024-69 | SLING EQUIPMENT – PASSENGER DOOR, REMOVAL/INSTALLATION |
| K52025-9 | WRENCH |
| K52026-1 | WRENCH |
| K52028-1 | WRENCH – REMOVAL/INSTALLATION, PULL-IN BEARING RETAINER NUT, PULL-IN MECHANISM |
| K52030-1 | ADAPTER – MANUAL DRIVE, LARGE CARGO DOOR |
| K52032-1 | DOOR EDGE PROTECTOR – REMOVAL/INSTALLATION |
| K52033-83 | Installation eqpt-ped vent flap seal |
| K52034-1 | WEIGHT COMPENSATION TOOL – HOLD-UP ROD, REMOVAL/INSTALLATION, PASSENGER ENTRY DOOR |
| K52038-1 | CAM NUT SOCKET – REMOVAL/INSTALLATION, HANDLE CAM NUT |
| K52039-1 | RIG PIN – PUSH-PULL CABLE AND FLOOR FITTING RIGGING, PASSENGER ENTRY DOOR |
| K52046-1 | LOCATION TOOL – LATCHED PROXIMITY SENSOR, FORWARD AND AFT CARGO DOOR |
| K52047-1 | ROLLER GUIDE ADJUSTMENT TOOL – ELECTRIC EQUIPMENT ACCESS DOORS |
| K52049-1 | FILLAND BLEED EQUIPMENT – LARGE CARGO DOOR |
| K53002-1 | TOOL |
| K53002-34 | REMOVAL/INSTALLATION EQUIPMENT – RADOME |
| K53003-3 | LADDER ASSY |
| K53003-34 | LADDER EQUIPMENT |
| K53003-37 | LADDER EQUIPMENT – EMPENNAGE ACCESS, VERTICAL FIN |
| K53003-38 | LADDER EQUIPMENT - VERTICAL FIN AND EMPENNAGE ACCESS (TOP ASSY) |
| K53003-51 | LADDER EQUIPMENT – EMPENNAGE ACCESS, VERTICAL FIN |
| K53004-54 | ACCESS LADDER EQUIPMENT – HORIZONTAL STABILIZER |
| K53005-1 | WRENCH ASSEMBLY – TORQUE ADJUSTMENT, RADOME LATCH |
| K54001-1 | REMOVAL/INSTALLATION EQUIPMENT – AFT STRUT FAIRING |
| K54001-100 | REMOVAL/INSTALLATION EQUIPMENT – AFT STRUT FAIRING |
| K54001-101 | Base Assy |
| K54001-110 | Item warning decal |
| K54001-111 | REMOVAL/INSTALLATION EQUIPMENT – AFT STRUT FAIRING |
| K54001-137 | TOOL |
| K54004-43 | SLING - STRUT UNLOAD |
| K55001-1 | JACKING EQPT |
| K55001-55 | JACKING EQPT |
| K55002-45 | LOCK - HORIZONTAL STABILIZER |
| K55002-46 | EQUIPMENT - LOAD APPLICATION, HORIZONTAL STABILIZER |
| K55003-1 | REMOVAL/INSTALL EQPT |
| K55006-1 | Reaction fixture eqpt-torque tool |
| K55006-125 | CLAMP SET |
| K55006-73 | FIXTURE PLATE SET |
| K55006-74 | CLAMP SET |
| K55006-75 | CLAMP SET |
| K55008-1 | TOOL |
| K55008-150 | MAINTENANCE PLATFORM |
| K55008-151 | FOOT EQPT |
| K55008-152 | FOOT EQPT |
| K55011-1 | LATCH RELEASE TOOL – SERVICE ACCESS DOOR |
| K55011-7 | LATCH RELEASE TOOL - SERVICE ACCESS DOOR |
| K56001-38 | SLING SET – NUMBER 1 AND 2 CONTROL CABIN WINDOWS |
| K56002-1 | PEOTRACTOR |
| K56003-1 | REMOVAL SHIM – PASSENGER WINDOWS |
| K56004-1 | GAGE - GO/ NO-GO WIPER END FITTING |
| K70333-24 | TOOL |
| K71001 | ENGINE CHANGE KIT-GE |
| K71001-105 | TOOL |
| K71001-124 | HEX SOCKET HEAD CAP SCREW |
| K71001-130 | TOOL |
| K71001-142 | TORQUE MULTIPLIER |
| K71001-144 | AFT HOLD OPEN ASSY |
| K71001-151 | ENGINE CHANGE KIT – GE |
| K71001-164 | Kit - Engine Change, GEnx-1B |
| K71001-21 | TOOL |
| K71001-23 | FWD SHORT EXTENSION |
| K71001-80 | TOOL |
| K71002-147 | ENGINE CHANGE KIT – ROLLS-ROYCE |
| K71002-148 | ENGINE CHANGE KIT – ROLLS-ROYCE |
| K71004-34 | TRANSPORTATION EQUIPMENT – ENGINE MOUNT STABILIZATION, GE |
| K71005-1 | TRANSPORTATION EQUIPMENT – ENGINE MOUNT STABILIZATION, ROLLS ROYCE |
| K71006-20 | HOIST EQUIPMENT – ENGINE MOUNTS AND THRUST LINKS |
| K71009-2 | TOOL |
| K71009-36 | Sling – Fan Cowl |
| K71009-41 | SLING - FAN COWL, TRENT 1000 ENGINE |
| K71009-49 | SLING – FAN COWL |
| K71010-1 | STAND ASSEMBLY |
| K71010-2 | STAND ASSEMBLY |
| K71010-76 | TOOL |
| K71010-87 | STAND ASSEMBLY – STORAGE, INLET ASSEMBLY |
| K71010-88 | STAND ASSEMBLY – STORAGE, INLET ASSEMBLY |
| K71012-1 | ADAPTER |
| K78001-36 | THRUST REVERSER CHANGE KIT-GE GENX |
| K78001-37 | TOOL |
| K78001-49 | THRUST REVERSER CHANGE KIT – GE GENX |
| K78002-70 | SLING EQPT |
| K78003-1 | Thrust reverser change kit,rr trent 1000 |
| K78003-100 | THRUST REVERSER CHANGE KIT – ROLLS ROYCE TRENT 1000 |
| K78004-104 | EQUIPMENT - THRUST REVERSER SLEEVE SLING, TRENT 1000 ENGINE |
| K78004-33 | TOOL |
| K78005-22 | EQUIPMENT - THRUST REVERSER HOLD OPEN (RR) |
| K78006-1 | LOCK - THRUST REVERSER ISOLATION VALVE |
| K78008-1 | STAND – TRANSPORTATION/WORK GENERAL ELECTRIC GENX THRUST REVERSER |
| K78009-1 | HOLD OPEN EQPT |
| K78010-72 | TRANSPORTATION/WORK STAND – THRUST REVERSER, ROLLS-ROYCE TRENT 1000 |
| K78012-63 | HOLD OPEN EQUIPMENT – GENX-1B THRUST REVERSER |
| KPC3-480-325 | PITOT PROVE COVER |
| KPC3-775-625 | COVER PITOT-HEAD |
| KPC3-780-45 | SMART PROBE SENSOR C |
| KPC3-825-8 | Full/static pressure probe cover |
| L20-021-1F | TOOL |
| LAG-5877 | BEARING CUP REMOVAL FROM SLEEVE FIXTURE |
| LLSDC-2-HK(S) | TOOL |
| LMC11G84-1 | COVER |
| LMC11G84-2 | Cover - Engine Inlet, CFM56-3 |
| M05102 | TOOL |
| M1082071 | TOOL |
| M20101 | TOOL |
| M21862 | EXTRACTEUR |
| M21929 | STRESSING FIXTURE |
| M21930 | Assembly filling |
| M21930-1 | FILLING ASSEMBLY |
| M21931 | HOISTING DEVICE |
| M46104 | SOCKET |
| M46178 | GUIDE CONE FOR PIN |
| M46179 | EXTRACTOR FOR BEARINGS |
| M46182 | POSITIONING PIN |
| M46186 | EXTRACTOR |
| M46188 | CASTELLATED WRENCH |
| M46193 | EXTRACTOR FOR PIN ASSEMBLY |
| M46194 | CASTELLATED WRENCH |
| M46195 | EXTRACTOR FOR SPRING PIN |
| M46196-1 | TOOL |
| M46196-100 | PLATE-MOUTING AND ADJUSTMENT |
| M46196-2 | TOOL |
| M46198 | PIN WRENCH |
| M46200 | FALSE JAWS |
| M46201 | PIN WRENCH |
| M46212 | FALSE JAWS |
| M46213 | PIN WRENCH |
| M46214-1000 | TOOL - ADJUSTMENT |
| M46214-2000 | TOOL, ADJUSTMENT |
| M46215 | SPECIAL WRENCH |
| M46226 | COMPRESSION TOOL FOR SPRING |
| M46227 | TEST TOOL |
| M46228 | ADAPTOR |
| M46270 | PIN WRENCH FOR NUT |
| M46292 | ADAPTOR-REMOVAL BRAKE |
| M46381 | TOOL |
| M46706 | TOOL |
| M46707 | TOOL |
| M46750 | ADAPTER-MLG WHL AXLE NUT |
| M46789 | SPACER-WASHER |
| M47099 | TOOL |
| M47151 | TOOL |
| M47152 | GUIDE CONE |
| M47154 | PIN-TRUNNION GUIDE |
| M47157-100 | ADAPTOR NLG AXLE NUT |
| M47380-100 | GUIDE CONE-BRAKE |
| M47380-200 | Aircraft Maintenance Fixture |
| M47380-200/100 | TOOL |
| M47381 | GUIDE CONE-WHEEL |
| M47382-100 | GUIDE CONE |
| M65723281 | TEST BOX |
| M65723281-05 | TOOL |
| M65725469-45 | TOOL |
| M65727534-10 | TOOL |
| M8165650 | AVIO SEAL REMOVAL TOOL |
| M82000555 | CLAPPER,BLEED-EXTERNAL |
| M82000678 | TEST PORT UNIVERSAL |
| M82000879 | TEST PORT UNIVERSAL A330-A32 |
| M83723/59-110AN | TOOL |
| M83723/59-112AN | TOOL |
| M83723/59-18AN | TOOL |
| M83723/60-110AN | TOOL |
| M83723/60-112AN | TOOL |
| M83723/60-114AN | TOOL |
| M83723/60-18AN | TOOL |
| M83723/60-28AN | TOOL |
| M83723/60-28-AN | TOOL |
| M83723-60-110AN | COVER RECPTCLE |
| M83723-60-114AC | TOOL |
| M83723-60-18AN | PLUG, SHUNT |
| M83723-60-210AN | TOOL |
| M83723-60-28AN | TOOL |
| ME141A3112 | TOOL |
| ME65B01221-1 | LOCATING SCREW – LOWER CAM, SHOCK STRUT ASSEMBLY, NOSE LANDING GEAR |
| ME65B01570 | SLING – RETRACT ACTUATOR, WING GEAR |
| ME65B04001 | BEAM RIG AILERON INB |
| ME65B06709-1 | MECHANICAL EQUIPMENT – WORK PLATFORM, LEADING EDGE FAIRINGS |
| ME65B40000-1 | MECHANICAL EQUIPMENT AIR CONDITIONING PACK INSTALLATION |
| ME65B40136-1 | MECH.EQUIP-PITOT STATIC PROBE |
| ME65B50263 | LEAK TEST KIT-PASSENGER OXYGEN SYSTEM |
| ME65B50263-1 | GAUGE ASSY |
| ME65B50263-2 | GAUGE ASSY |
| ME65B57391 | DOLLY – ESCAPE SLIDE/RAFT PACK |
| ME65B80713-1 | LOCK – BALLNUT, HORIZONTAL STABILIZER ACTUATOR |
| ME65B83635 | TORQUE WRENCH ADAPTER – BRAKES, SIDE CARGO DOOR |
| MG174-04 | TOOL, DISASSEMBLY IMPELLER |
| MH13-003 | WHEEL DOLLY B737 |
| MIT002A0001-112 | MISCELLANEOUS TOOL TORQUE TUBE COUNTERSINK RADIUS RELIEF TOOL |
| MIT115A5002 | TOOL |
| MIT143A3110 | TOOL |
| MIT148T2140 | MISCELLANEOUS TOOL CLAMP |
| MIT183A8100 | TOOL |
| MIT60B92404 | MISCELLANEOUS TOOL PULLER – FUEL BOOSTER PUMP |
| MIT61B04020 | RIGGING GAUGE – UPPER DECK DOOR (TYPE A) LIFT SYSTEM |
| MIT61B10010 | NOSE CARGO DOOR PORTAL LATCH FITTING – RIGGING TOOL |
| MIT65B01185 | SOCKET |
| MIT65B01201 | WRENCH ADAPTER – GLAND NUT, WING AND BODY GEAR |
| MIT65B01202-1 | ADAPTER ASSY,WRENCH-L.G.WHEEL RETAINING NUT |
| MIT65B01218 | TORQUE ADAPTER – DRAG BRACE ASSEMBLY, WING LANDING GEAR |
| MIT65B04001-41 | MISCELLANEOUS TOOL – CONTROL WHEEL STRAIGHTEDGE |
| MIT65B04008 | MISCELLANEOUS TOOL – ANGLE GEARBOX ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE |
| MIT65B05160 | ALIGNMENT GUIDE – BOLT, STEERING MECHANISM , BODY LANDING GEAR |
| MIT65B05398-4 | RESTRAINING TOOL, BUNGEE – NOSE LANDING GEAR |
| MIT65B07911 | WRENCH – GROUND START VALVE, INSTALLATION/REMOVAL |
| MIT65B08027 | PIN PULLER – INBOARD AND OUTBOARD TRAILING EDGE FLAPS |
| MIT65B09269 | CABLE RESTRAINING TOOL |
| MIT65B11030 | TEST EQUIPMENT – EMERGENCY POWER INSTALLATION, MAIN DOORS 1 THRU 5 |
| MIT65B12349 | THREAD PROTECTOR – HINGE BOLT, NOSE CARGO DOOR |
| MIT65B13164 | ADAPTER – WRENCH, BEARING NUT, MAIN ENTRY DOOR |
| MIT65B13962-1 | TOOL |
| MIT65B18211 | HOLDING TOOL – UPPER SHOCK STRUT BULKHEAD FITTING, WING LANDING GEAR |
| MIT65B80430 | ALTERNATE DRIVE EXTENSION, NOSE DOOR LIFT ACTUATOR |
| MIT65B80432 | ALIGNMENT PIN – NOSE CARGO DOOR LATCH |
| MIT65B80549 | ADAPTER – TORQUE WRENCH, OUTBOARD ELEVATOR POWER CONTROL UNIT (PCU) |
| MIT65B80550 | ADAPTER – TORQUE WRENCH, INBOARD ELEVATOR, POWER CONTROL UNIT |
| MIT65B80985-9 | ADAPTER – PROTRACTOR, THRUST LEVER |
| MIT65B81230 | SAFETY PIN – QUADRANT ASSEMBLY, LANDING GEAR CONTROL LEVER |
| MIT65B82664 | HANDLE LOCK – MAIN LANDING GEAR DOOR, GROUND RELEASE |
| MIT69B81601-1 | ADAPTER – PROTRACTOR, THRUST REVERSER |
| MIT825A8422-1 | TOOL |
| MP-000084-001 | TOOL |
| MP-002102-001 | TOOL |
| MS16998-48 | TOOL |
| MS17986C613 | TOOL |
| MS21913-10 | Plug,flareless tube |
| MS21913-12 | Plug,flareless tube |
| MS21913-16 | Plug,flareless tube |
| MS21913-2 | Plug,flareless tube |
| MS21913-20 | Plug,flareless tube |
| MS21913-24 | Plug,flareless tube |
| MS21913-3 | Plug,flareless tube |
| MS21913-4 | Plug,flareless tube |
| MS21913-5 | Plug,flareless tube |
| MS21913-6 | Plug,flareless tube |
| MS21913-8 | Plug,flareless tube |
| MS21913-9 | PLUG-BLANKING |
| MS21913D10 | TOOL |
| MS21913D4 | TOOL |
| MS21913D6 | TOOL |
| MS21913W6 | TOOL |
| MS21914-10 | Cap,pressure seal,flareless tube fitting |
| MS21914-12 | CAP |
| MS21914-2 | Cap,pressure seal,flareless tube fitting |
| MS21914-20 | Cap,pressure seal,flareless tube fitting |
| MS21914-24 | Cap,pressure seal,flareless tube fitting |
| MS21914-2W | TOOL |
| MS21914-4 | Cap,pressure seal,flareless tube fitting |
| MS21914-4D | TOOL |
| MS21914-4W | TOOL |
| MS21914-5 | Cap,pressure seal,flareless tube fitting |
| MS21914-5J | TOOL |
| MS21914-6 | Cap,pressure seal,flareless tube fitting |
| MS21914-9 | CAP |
| MS24203 | TOOL |
| MS25043-10DA | CAP PROTECTIVE CAP |
| MS27404-3D | TANK ADAPTER |
| MT0011 | Torque Adapter - Firewall, Connector |
| MZ23080000 | PIN-LOCKING |
| NAS1091-30 | TOOL |
| NAS1756-30 | TOOL |
| NAS1756-36 | TOOL |
| NAS1756-84 | TOOL |
| NJE170T06490-401 | Pylon AFT Device |
| NTG3004-D | TOOL |
| OHME65B00110-53 | BOOTSTRAP CLAMP – FAIRING, TRAILING EDGE FLAP TRACK |
| OHME65B00117 | INBD AILERON REMOVAL & INSTL,HANDING TOOL |
| OHME65B00714 | SLING – STRUT INSTALLATION AND REMOVAL |
| OHME65B01462 | HOISTING TOOL-RETRACT ACTUATOR NLG |
| OHME65B01836 | SLING ASSY PASSENGER ENTRY DOOR |
| OHME65B10910 | SLING ASSY W.L.G. & B.L.G. DOORS REMOVAL & INSTL |
| OHME65B67443 | SLING ASSY-ESCAPE SLIDE,STRETCHED UPPER DECK |
| OHME65B80713-1 | HANDLING EQUIPMENT-HORIZONTAL STABILIZER ACTUATOR |
| OHME65B81110-1 | BRAKET ASSY |
| OHME65B81111-3 | ADAPTER HOISTING POWER UNIT OUTBD T.E.FLAP |
| OMP2505-3 | FITTING- SERVICE COUPLING,OIL |
| OMP2506-2 | COUPLING HALF BULKHEAD |
| OMP2506-3 | IDG CONNECTOR |
| OT900-0247 | TOOL |
| OU131281 | PIN RIGGING |
| OU144765 | WRENCH |
| OU145409 | SPECIAL WRENCH |
| OU145413 | CONE MOUNTING THS AC |
| OU145414 | TOOL |
| OU145506 | MONTE JOINT |
| OU145914 | DRAINING TOOL |
| OU145920 | TOOL-MANUAL CRANKING STOP,THS ACTUATOR |
| OU190358 | TOOL-ZERO LOCATION THSA |
| OU190514 | TOOL |
| OU190686 | BACKLASH BALLNUT BAC |
| OU190834 | TOOL ZERO LOCKING POSITION |
| OU190844 | RELEASE TOOL |
| OU190857 | TOOL JAMMING SIMULATOR |
| OU191069 | TOOL - JAMMING SIMULATION 第2次发货 |
| OU191191 | CONTROL SCREW & BAR THSA320 |
| OU191192 | CHECKING TOOL - BALL SCREW AND TIE BAR |
| OU192148 | TOOL |
| OU300459 | TOOL |
| OU300765 | A330 SOCKET WRENCH |
| OU300851 | TOOLING OF STRESS PICK-UP |
| OUT184 | TOOL |
| P1908 | CLE A ROUE TP F70 |
| PC-1006 | ADAPTER, OXYGEN CHARGING |
| PD-1201 | TORQUE MILTIPLIER |
| PD2501 | TORQUE MILTIPLIER |
| PD-2501 | TORQUE MILTIPLIER |
| PF51-002-1 | TOOL |
| PF51-003-1 | FISHPOLE HOIST |
| PF51-009-1 | FISH POLE - HEAVY WEIGHT |
| PF53361-2PWS | CART-SERVICING, ENGINE OIL |
| PF53361-8PWS | TOOL |
| PF53361PWS | DISPENSER HYDRAULIC |
| PF53481-5PWS | DISPENSER - SERVICING, ENGINE OIL |
| PF53481-8PWS | TOOL |
| PF53481-9P | COM-1532 |
| PF53693P | TOOL |
| PF54115-23P | TOOL |
| PF54115-5P | SKYDROL 500 FLUID DISPENSER |
| PF54124-2P | TOOL |
| PF54124-3P | CART - SERVICING, OIL |
| PF55451-1 | 15 GAL FLUID DISPENS |
| PF55451-23 | COM-1532 |
| PF55518-5P | TOOL |
| PF55759 | GRAVITY FILL ADAPTER ASSY |
| PF80-012-500 | TOOL |
| PME65B00110-53 | HANDLING DOLLY – FAIRING, TRAILING EDGE FLAP TRACK |
| PME65B80549 | CRADLE – HANDLING, OUTBOARD ELEVATOR ACTUATOR |
| PRE65B00780-1 | THREAD PROTECTOR – CONE BOLT, APU |
| PRE65B01202-1 | PROTECTIVE EQUIPMENT – PIN, TRIPOD APEX, NOSE LANDING GEAR |
| PSS84368-4-4-4 | TOOL |
| PWA101041 | NOZZLE-WATER WASH |
| PWA101418 | BOLT |
| PWA101618 | JOINT |
| PWA101674 | TOOL |
| PWA102096 | TOOL |
| PWA102263 | KIT - EPR P4.95 PROBE |
| PWA102283 | KIT-EPR P4.95 PROBE |
| PWA102398 | TOOL |
| PWA102757 | TOOL |
| PWA102828 | COMPRESSOR-LPC FAN BLADE/LPC |
| PWA103347 | BRACKET,SUPPORT |
| PWA103437 | PROTECTOR SHIPPING |
| PWA104199 | TOOL |
| PWA105181 | TOOL |
| PWA105191 | PULLER KNOCKER |
| PWA105276 | TOOL |
| PWA105287 | TOOL |
| PWA105350 | COLLAR - HOLDING |
| PWA107214 | TOOL |
| PWA107780 | TOOL |
| PWA107802 | PHOTOGRAPH, INSPECTION |
| PWA109774 | COVER, VAC.CHECK |
| PWA110092 | BOROSCOPE GUIDE |
| PWA111016 | PULLER, HAND |
| PWA111017 | Fixture support |
| PWA111018 | ADAPTER, LIFT |
| PWA111092 | ADAPTER, SUPPORT |
| PWA111093 | ADAPTER, SUPPORT |
| PWA111199 | SLIDE PULLER |
| PWA111414 | ADAPTER, SUPPORT |
| PWA111443 | ROTATOR ADAPTER - ENGINE ASSY, BORESCOPE |
| PWA111529 | FIXTURE, INSTALLATION |
| PWA111606 | TOOL |
| PWA111679 | PULLER, JACKSCREW |
| PWA115422 | TOOL |
| PWA115424 | WEDGE, HAND |
| PWA202076 | STARTER DUCT VALVE LINKAGE |
| PWA211134 | SEAL EXTRACTOR |
| PWA211137 | PULLER, MECHANICAL |
| PWA211159 | AVIATION TOOL |
| PWA211186 | PULLER MECHANICAL OIL TANK VENT VALVE |
| PWA211190 | PULLER |
| PWA211284 | ADAPTER, INSTALLATION |
| PWA211305 | TOOL |
| PWA211307 | TOOL |
| PWA211314 | TOOL |
| PWA211404 | TOOL |
| PWA211421 | TOOL |
| PWA211430 | STAND, TRANSPORT |
| PWA211434 | TOOL |
| PWA211435 | TOOL |
| PWA211624 | TOOL |
| PWA211773 | PULLER |
| PWA211774 | TOOL |
| PWA211775 | TOOL |
| PWA211776 | TOOL |
| PWA211777 | TOOL |
| PWA211778 | TOOL |
| PWA211779 | TOOL |
| PWA211783 | TOOL |
| PWA211790 | PULLER, JACKSCREW |
| PWA211825 | PIN-SAFETY |
| PWA212262 | IGNITER INSERT ADAPTER |
| PWA212369 | TOOL |
| PWA24524 | THREAD CHASING TAP |
| PWA26139 | TOOL |
| PWA26377 | TOOL |
| PWA26657 | TAP CHASING DIFFUSER CASE SPARK IGNITER THREAD |
| PWA27641 | Tap - Thread Chasing, Diffuser Case/Igniter Boss |
| PWA29351 | TOOL |
| PWA29389 | HYDRAULIC PUMP |
| PWA29451 | ADAPTER-HYD PUMP |
| PWA29486 | FUEL PRESERVATION ADAPTER |
| PWA29855 | PIN ALIGNING |
| PWA29855-2 | ALIGNING PINS |
| PWA29855-3 | TOOL |
| PWA29855-7 | TOOL |
| PWA76155 | TOOL |
| PWA80230 | ADAPTER, PEDESTAL |
| PWA80246 | TOOL |
| PWA80611 | JACK-HYDRAULIC |
| PWA80698 | PEDESTAL, SUPPORT |
| PWA81098 | TOOL |
| PWA83298 | DISTRIBUTOR-WATER WASH |
| PWA85035 | TOOL |
| PWA85234 | RIVETER-HAND,FAN TRIM BALANCE AND LPT |
| PWA85306 | PULLER KNOCKER |
| PWA85307 | PULLER-JACKSCREW ENG ASSY N.4 BEARING COVER |
| PWA85307G | TOOL |
| PWA85393 | PIN,RIGGING |
| PWA85393B | TOOL |
| PWA85433 | TOOL |
| PWA85451 | TOOL |
| PWA85465 | PIN,RIGGING |
| PWA85579 | ELBOW |
| PWA85675 | KIT-RIGGING PINS ENG |
| PWA85688 | PULLER JCAKSCREW |
| PWA85768 | PULLER, KNOCKER |
| PWA85768A | TOOL |
| PWA85862 | TOOL |
| PWA86057 | TOOL |
| PWA86069 | PIN,RIGGING |
| PWA86081 | PULLER-MECHANICAL LPT BORESCOPE PLUG |
| PWA86097 | PIN,RIGGING |
| PWA86122 | PULLER KNOCKER |
| PWA86197 | PIN,RIGGING |
| PWA86197A | TOOL |
| PWA86331 | PIN,RIGGING CHECK |
| PWA86331A | TOOL |
| PWA86332 | PIN,RIGGING CHECK |
| PWA86344 | TOOL |
| PWA86344 | TOOL |
| PWA86411 | GUIDE TUBE, BORESCOPE |
| PWA86459 | PULLER FUEL DISTRIBU |
| PWA86461 | TOOL |
| PWA86461A | TOOL |
| PWA86580 | DRIVER-BORESCOPE BOL |
| PWA86627 | NOZZLE,WATER WASH |
| PWA87055 | FIXTURE,SUPPORT |
| PWA87198 | ADAPTER,TORQUE |
| PWA87225 | PULLER JCAKSCREW |
| PWA87305 | PULLER KNOCKER |
| PWA87360 | FIXTURE,INSTL/RMV |
| PWA87373 | PULLER KNOCKER |
| PWA87377 | JACK-HYDRAULIC |
| PWA87502 | TOOL |
| PWA87546 | ADAPTER,TORQUE |
| PWA87754 | DRIFT |
| PWA88000 | SLING,LIFT-POWER PLANT,THRUST REVERSER |
| PWA88003 | PUMP PUMP, HYDRA |
| PWA88004 | SLING,LIFT-POWER PLANT,THRUST REVERSER |
| PWA88009 | GUIDE PROTECT |
| PWA88010 | SUPPORT SAFETY |
| PWA88011 | SUPPORT SAFETY |
| PWA88012 | PIN LOCK |
| PWA88013 | PIN UNLCOK |
| PWA88014 | PIN LOCK |
| PWA88016 | SPACER BLOCKS FIELD RIGGING TOOL |
| PWA88017 | CALIPERS FIELD RIGGING TOOL |
| PWA88032 | PIN LOCK |
| PWA88050 | SLING LIFT |
| PWA88051 | SLING LIFT |
| PWA88052 | SLING LIFT |
| PWA88064 | AFT FAN COWL HINGE |
| PWA88110 | PULLER KNOCKER |
| PWA88231 | PULLER JACKSCREW |
| PWA88440 | RIGGING TOOL |
| PWA88617 | TOOL |
| PWA95825 | TOOL |
| PWC30128-14 | TOOL |
| PWC30331 | TOOL |
| PWC30335 | TOOL |
| PWC30403 | TOOL |
| PWC30405 | TOOL |
| PWC30458 | TOOL |
| PWC30530 | TOOL |
| PWC30556 | FIER PULLER |
| PWC30862 | TOOL |
| PWC32271 | TOOL |
| PWC34405 | TOOL |
| PWC34416 | TOOL |
| PWC34913 | TOOL |
| PWC34941 | TOOL |
| PWC38147 | ADAPTER FITTING-DRA |
| PWC50113 | TOOL |
| PWC50726 | FIER PULLER |
| PWC56851 | TOOL |
| PWC57233 | TOOL |
| PWC70099 | TOOL |
| PWC70907 | TOOL |
| PWC71041 | TOOL |
| PWC71296 | TOOL |
| PWC71559 | TOOL |
| PWC90025 | TOOL |
| Q21983 | TOOL |
| Q46098 | GUIDE CONE |
| Q46099 | WRENCH |
| Q46100 | ADAPTER |
| Q46108 | TOOL |
| Q46111 | TOOL |
| Q46282 | TOOL |
| Q46498 | COMPRESSION TOOL |
| Q46500 | TOOL |
| Q46632 | TOOL |
| Q46676 | INSTALLATION CONE |
| Q47316 | PROTECTOR-MLG AXLE (MHB) |
| Q47323-1 | GUIDE CONE |
| Q47334 | TOOL |
| Q47621 | ADAPTER |
| Q47719 | EXTRACTOR |
| Q47734 | TOOL |
| Q47735 | TOOL |
| Q47749 | GUIDE |
| Q47963 | TOOL |
| Q47964 | INSTALLING THE PISTON IN THE LINER CONE |
| Q47965 | TOOL |
| QD1R200 | TOOL |
| QD2R200 | TORQUE WRENCH, ADJ. CLICK TYPE, COMP |
| QD3R2500 | TOOL |
| R/C-AOAC-2 | COVER VANE , ANGLE OF ATTACK |
| R46014 | ADAPTOR |
| R46217 | TOOL - TORQUE BAR HOLE REPAIR |
| BUSHING | |
| R46729 | TOOL |
| R46738 | PROTECTOR - AXLE |
| R47164 | Installation of adjuster pin into piston |
| R78001-58 | PLATFORM – ACCESS, THRUST REVERSER, BLOCKER DOOR |
| RA153042 | TOOL |
| RA70301 | THRUST REVERSER PLUG/B777GE90 |
| RA70302 | EXHAUST NOZZLE PLUG/B777GE90 |
| RC-51 | ADAPTER, FAN ROTOR INSTALL |
| RES1132 | TOOL |
| RRT016625 | TOOL |
| RRT027240 | TOOL |
| RRT027457 | TOOL |
| RRT027464-3 | TOOL |
| RRT027868-2 | TOOL |
| RRT028138 | TOOL |
| RRT028228 | TOOL |
| RRT028932 | TOOL |
| RRT029232-1 | TOOL |
| RRT029233 | TOOL |
| RRT030576 | TOOL |
| RRT030591 | TOOL |
| RRT032369 | ADAPTOR - SPRUNG |
| RRT032945 | TOOL |
| RRT033861 | TOOL |
| RRT033866 | TOOL |
| RRT037455 | PIN, GUIDE - ALIGN / GUIDE PMA STATOR OVER ROTOR |
| RRT038756-3 | TOOL |
| RRT038757-1 | TOOL |
| RRT039898 | TOOL |
| RRT040663 | TOOL |
| RRT041040 | TOOL |
| RRT042328-2 | TOOL |
| RRT046961 | TOOL |
| RRT046961-1 | TURNING TOOL |
| RRT049363 | TOOL |
| RRT050495 | TOOL |
| RRT050664 | TOOL |
| RRT050673 | TOOL |
| RRT054314-1 | TOOL |
| RRT054317 | Protective Cover |
| RRT054322-1 | Radial Drive Installation Shrouds |
| RRT054323 | TOOL |
| RRT054977 | TOOL |
| RRT055639 | TOOL |
| RRT056211-1 | TOOL |
| RRT056217-1 | TOOL |
| RRT057174 | TOOL |
| RRT057891 | TOOL |
| RRT057891-7 | TOOL |
| RRT057892-3 | TOOL |
| RRT058139 | TOOL |
| RRT058140-2 | TOOL |
| RRT058143-2 | TOOL |
| RRT058147 | TOOL |
| RRT058599 | TOOL |
| RRT058600 | TOOL |
| RRT061188-2 | Extraction Tool |
| RRT061239 | TOOL |
| RRT061240 | TOOL |
| RRT061241 | TOOL |
| RRT061242 | TOOL |
| RRT061249-1 | TOOL |
| RRT062900 | TOOL |
| RRT063226 | QUICK-RELEASE OIL DRAINING |
| RRT063357-1 | TOOL |
| RRT063783 | LRU LIFTING SLING |
| RRT065392 | TOOL |
| RRT065693 | ADAPTOR-LRU FIXTURES TO TROLLEY |
| RRT066269 | INSTALLATION TOOL |
| RRT070736 | TOOL |
| RRT070948 | TOOL |
| RRT072428 | TOOL |
| RRT074192-1 | TOOL |
| RRT074288 | TOOL |
| RRT074532 | Assembly tool |
| RRT075837-1 | TOOL |
| RRT078847 | TOOL |
| RRT080176 | TOOL |
| RRT081482 | TOOL |
| RRT082626 | TOOL |
| RRT083457 | TOOL |
| RRT083559 | TOOL |
| RRT083566-1 | TOOL |
| RRT083782 | TOOL |
| RRT084300-1 | Lifting Adapter |
| RRT085111 | TOOL |
| RRT087440 | TOOL |
| RRT087442-2 | TOOL |
| RRT087442-3 | TOOL |
| RRT087465 | TOOL |
| RRT087629 | TOOL |
| RRT088112 | GAUGE |
| RRT089140 | TOOL |
| RRT091205 | TOOL |
| RRT092802 | TOOL |
| RRT093532 | IPC TURNING TOOL |
| RRT095945-1 | TOOL |
| RRT096712 | TOOL |
| RRT099814 | TOOL |
| RRT099815 | TOOL |
| RRT100210 | TOOL |
| RRT100973 | TOOL |
| RRT101115-2 | TOOL |
| RRT101745 | TOOL |
| RRT102554 | TOOL |
| RRT102591 | TOOL |
| RRT103194 | TOOL |
| RRT103901 | TOOL |
| RRT103960 | TOOL |
| RRT104693 | FUEL PUMP FIXTURES |
| RRT104996 | TOOL |
| RRT104997 | TOOL |
| RRT105443 | TOOL |
| RRT105698 | TOOL |
| RRT105786 | TOOL |
| RRT105788 | SPANNER - IMMOBILISE PMA RETENTION NUT WHILST TORQ |
| RRT106315 | TOOL |
| RRT106548 | TOOL |
| RRT106601 | TOOL |
| RRT107389 | REMOVAL TOOL |
| RRT108033 | TOOL |
| RRT108320 | TOOL |
| RRT108321 | TOOL |
| RRT108446 | TOOL |
| RRT108490 | Gauge |
| RRT109933 | TOOL |
| RRT110590-1 | Jacking Trolley |
| RRT110718 | TOOL |
| RRT111117 | TOOL |
| RRT111117-1 | Assembly tool |
| RRT112901 | TOOL |
| RRT114812 | Platform |
| RRT116715 | TOOL |
| RRT117775 | TOOL |
| RRT118500 | TOOL |
| RRT5826707 | CRADLE - APU |
| RSE1004 | TOOL |
| RSE1005 | SLING - FAN REVERSER ASSEMBLY |
| RSE1012 | SUPPORT - EXHAUST PLUG |
| RSE1024 | COVER-PRIMARY EXHAUST NOZZLE |
| RSE1060 | WRENCH |
| RSE1071 | WRENCH SET |
| RSE1098 | WRENCH SET-AFT ENGINE MOUNT |
| RSE1098-1 | WRENCH,SPANNER AFTENGINE MOUNT NUTS |
| RSE1098-1-3-5 | TOOL |
| RSE1098-3 | SPANNER WRENCH |
| RSE1098-5 | WRENCH,SPANNER AFTENGINE MOUNT NUTS |
| RSE1112 | SLING-INLET COWL/CFM56-5 |
| RSE1113 | SLING-FAN COWL |
| RSE1115 | COVER COWL INLET ENGINE |
| RSE1116 | TOOL |
| RSE1117 | PROTECTOR THREAD COWL DOOR BOLT |
| RSE1130 | FIXTURE EXHAUST NOZZLE |
| RSE1132 | COVER- COMMON NOZZLE |
| RSE1133 | HANDLING SLING |
| RSE1147 | WRENCH SPANNER |
| RSE1165 | TORQUE ADAPTER TOOL |
| RSE1193 | TOOL |
| RSE1224 | SPLINT-ENGINE MOUNT AFT |
| RSE1234 | TORQUE ADAPTER TOOL |
| RSE1236 | TOOL |
| RSE1244 | COVER - INLET |
| COWL ENGINE | |
| RSE1248 | INDEX PIN-AIR INTAKE COWL |
| RSE6403 | TOOL |
| RSE7301 | ENGINE THRUST REVERSER LIFT FIXTURE |
| S1201001500200 | TOOL |
| S16-0609-0872 | BULLET SEAL |
| S387IDG | HOIST-ACCESSORY, IDG R/I FOR CFM56-5 |
| S48431 | TOOL |
| S48432 | TOOL |
| S48433 | TOOL |
| S48515 | RING HAMMERED |
| S48573 | TOOL |
| S4933959-521 | CIRCUIT BREAKER LOCK |
| S-4933959-521 | TOOL |
| S49956 | TOOL |
| S49956-1 | AXLE PROTECTOR BRAKE |
| S587-2BH0 | TOOL |
| S888IDG | TOOL |
| S889BH0 | BRACE - HOLD OPEN COWLS(V2500) |
| SAFETYPIN-RAT | TOOL |
| SAL12 | TOOL |
| SAL17 | CONE -GUIDE BRAKE, BLG & WLG |
| SAL18 | GUIDE CONE |
| SAL19 | GUIDE CONE,BRAKE PIN |
| SBE2213 | KIT TOOL-TESTER SENSELINE |
| SCA-150 | TOOL |
| SE27-0001 | CONTROL WHEEL STRAIGHTEDGE |
| SE7-0001 | TOOL |
| SF10002 | TOOL |
| SJN471 | TOOL |
| SJN523 | TOOL |
| SL90-303-1-1250 | TOOL |
| SL90-309-1-1250 | TOOL |
| SL90-309-7500 | TOOL |
| SL90-310-7500 | TOOL |
| SL90-313-1-000 | TOOL |
| SL90-313-1-0000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 |
| SL90-313-3750 | TOOL, TAB WASHER INSTALLATON |
| SL90-313-4375 | TOOL - INSTALLATION, |
| SL90-313-5000 | TOOL - INSTALLATION, TAB WASHER STA-LOK NSA5454 |
| SL90-313-5625 | TOOL, TAB WASHER INSTALLATON |
| SL90-313-6250 | TOOL - INSTALLATION, TAB WASHER STA-LOK |
| SL90-313-6250W | TOOL |
| SL90-313-7500 | STA LOK TOOL |
| SL90-313-8750 | TOOL |
| SL90-314-1-0000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 |
| SL90-314-3750 | TOOL, TAB WASHER REMOVAL |
| SL90-314-4375 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 |
| SL90-314-5000 | EXTRACTION TAB STA LOK |
| SL90-314-5625 | EXTRTOOL EXTRACTION-TOOL OF TAB WASHERS |
| SL90-314-6250 | TOOL-REMOVAL, WASHER |
| SL90-314-6250W | TOOL |
| SL90-314-7500 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 |
| SL90-314-8750 | TOOL |
| SL90-315-1-0000 | TOOL |
| SL90-315-3750 | WRENCH WRENCH - NO |
| SL90-315-4375 | NOTCHED-WRENCH |
| SL90-315-5000 | WRENCH- NOTCHED, TIGHTENING OF NUTS NSA5454 |
| SL90-315-5625 | TOOL |
| SL90-315-6250 | NOTCHED-WRENCH |
| SL90-315-6250WX | TOOL |
| SL90-315-7500 | WRENCH - NOTCHED, TIGHTENING OF NUTS |
| SL90-315-7500W | TOOL |
| SL90-321-5000 | TOOL |
| SL90-322-5625 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 |
| SL90-349-5000 | TOOL |
| SL90-349-6875 | TOOL |
| SL90-349-7500 | TOOL-INSTALLATION,TAB WASHERS STA-LOK NSA5454 |
| SL90-350-5000 | TOOL |
| SL90-350-7500 | TOOL EXTRACTION TAB WASHERS STA*LOK |
| SL90-356-3750 | TOOL |
| SL90-359-3750 | TOOL |
| SL90-374-10000 | TOOL |
| SL90-374-1-2500 | WRENCH-NOTCHED, TIGHTENING OF NUTS |
| SL90-374-3750 | TOOL |
| SL90-374-4375 | TOOL |
| SL90-374-5000 | TOOL |
| SL90-374-6250 | TOOL - EXTRACTION, TAB WASHERS |
| SL90-374-7500 | WRENCH NOTCHED TIGHTENING OF NUTS |
| SL90-374-8750 | TOOL |
| SL90-437-6250 | TOOL |
| SL90-487-6250 | TOOL |
| SL90-626-3125 | TOOL - INSTALLATION, WASHERS SL40871 |
| SL90-627-3125 | TOOL - REMOVAL, WASHERS SL40871 |
| SPL-1521 | TOOL |
| SPL-1527 | TOOL |
| SPL-1530 | TELESCOPIC FUEL/WATER DRAIN TOOL |
| SPL-1829 | TOOL |
| ST1066-1 | INSTALLATION TOOL AIR SEAL,RUBBER ROLLER TOOL |
| ST1066-3 | INSTALLATION TOOL AIR SEAL,RUBBER EDGE TOOL |
| ST1066RB-1 | Release key |
| ST1069D | STANDARD TOOL GROMMET SET FOR INSTALLATION OF BAC-G20L |
| ST1742F-1 | Install and Removal Tool - Window Reveal |
| ST2580-163A | WRENCH – SPANNER TYPE |
| ST2580-177 | TOOL |
| ST2580-202 | WRENCH – SOCKET, MAIN GEAR TRUNNION LINK |
| ST2580-251 | STANDARD TOOL – TORQUE WRENCH ADAPTER, 0.375 SLOT – 5-INCH OUTSIDE DIAMETER |
| ST2580-263 | TORQUE WRENCH ADAPTER – WALKING BEAM ASSEMBLY – NUT SPACER |
| ST2580-267 | STANDARD TOOL-SPANNER WRENCH ADAPTER FOR BACN10RF-NUTS |
| ST2580-267-10 | TOOL |
| ST2580-286-8 | SPANNER |
| ST2580-315 | ADAPTER |
| ST2580-334C | STANDARD TOOL – SPANNER NOSE PLIERS |
| ST2580-334C-1-145 | STANDARD TOOL – SPANNER NOSE PLIERS |
| ST2580-334C-1-185 | STANDARD TOOL – SPANNER NOSE PLIERS |
| ST2580-381 | TOOL |
| ST2580-418 | Wrench - Torque, Spanner |
| ST2584C | PLIERS |
| ST2584-C | TOOL |
| ST2584C-1 | PLIER ASSY |
| ST2589A-1 | TOOL |
| ST7217J-1 | TOOL |
| ST848 | INSTALLATION TOOLS - O-RINGS |
| ST848R | REMOVAL TOOL O RING |
| ST8709H-3 | STANDARD TOOL – GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING |
| ST8709H-4 | STANDARD TOOL – GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING |
| ST8709H-7 | STANDARD TOOL – GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING |
| ST8709H-X | Gage - Go/No-Go, Fuel Wiggins Coupling (BACC42R); X indicates gage number -1 to -7 |
| ST878D | STANDARD TOOL – SLEEVESET FOR PRESETTING BACS13AP FLARELESS TUBE FITTINGS |
| ST879AF | HOLDING FIXTURE – HAND PRESETTING TOOLS, ST879A |
| ST879AF1 | TOOL |
| ST902-R | REFORM TOOL – FLANGE COUPLING, BACF22AA, BACF22AB |
| ST918-375-875 | TOOL |
| ST918A | STANDARD TOOL MANDREL-BEARING-PRESSING BACB10A |
| ST918A-500-1000 | TOOL |
| ST919 | STANDARD TOOL SUPPORT BEARING INSTALL |
| ST921E | SHEAR PIN PULLER – WING LANDING GEAR |
| ST926C-1125-2000-1877 | TOOL |
| ST926C-1375-2250-2127 | TOOL |
| ST927 | BEARING REMOVAL TOOL |
| ST927-1 | BEARING REMOVAL TOOL |
| ST927-2 | BEARING REMOVAL TOOL |
| ST927-4 | BEARING REMOVAL TOOL |
| ST927-6 | BEARING REMOVAL TOOL |
| ST927B-49 | TOOL |
| ST927B-7 | TOOL |
| ST927C-11 | TOOL |
| ST927C-136 | TOOL |
| ST927C-140 | TOOL |
| ST927C-146 | TOOL |
| ST927C-78 | TOOL |
| ST928C-18 | TOOL |
| ST9501B | TOOL |
| ST982L-9 | TOOL |
| ST991A | TOOL |
| ST991A-2 | STANDARD TOOL – REMOVAL TOOL, SCRIVET FASTENER |
| ST991A-2-250 | STANDARD TOOL |
| ST991A-2-312 | TOOL |
| ST992B | ADAPTER-GREASE GUN |
| STD-585 | Mat - Protect., 3/8'(9mm) Min. Thick., Min. 42x60'(1x1.5m) Warning Streamers |
| STD-7111 | TOOL |
| SV-11-002B | TOOL |
| SV-11-003B | TOOL |
| SV-BS10-10-00 | BRACE - HOLD OPENCOWLS/CFM56-5 |
| SV-C78009-38 | TOOL |
| SV-CS-CGQ100E | TOOL |
| SV-CS-CGQ25E | TOOL |
| SV-CS-CGQ400E1 | TOOL |
| SV-CS-CGQ63E | TOOL |
| SV-F70199-1 | INFLATION TOOL-TIRE/B737 |
| SV-F70200-1 | INFLATION TOOL-STRUT |
| SV-F70200-17 | TOOL |
| SV-KPC3-480-325 | PITOT PROBE COVER/B737NG/B757 |
| SV-PD-610×76-JX | Aircraft Warning Streamer |
| SWEENEY 8200 | WRENCH, TORQUE MULTIPLIER |
| T060040 | ASSEMBLY TOOL |
| T46437 | PS RATCHET |
| T48221 | PLASTIC PICK TOOL |
| T71884 | Gauge-bayonet slot wear |
| T720456 | TOOL - VALVE LOCKING |
| T8339043 | IGV positioner |
| TB3043G002 | TOOL FOR ENDOSCOPIC INSPECTION |
| TB9069G001 | DRAINING TUBE-GEARBOX |
| TCA-2019-005 | TOOL |
| TCA-2020-040 | TOOL |
| TCA-2020-068 | TOOL |
| TCA-2022-0137 | TOOL |
| TE65B01202 | TEST EQUIPMENT – NOSE GEAR COMPONENT ASSEMBLY |
| TE65B50041 | TEST EQUIPMENT DRAIN MAST INSTALLATION WASTE WATER |
| TE65B98600 | BLANKING PLATE – LEAKAGE TEST, APU BLEED AIR |
| TE65B98608 | TEST EQUIPMENT – DRAIN INSTALLATION, APU |
| TLW101 | TEST TOOL-RELEASE CABLE,ESCAPE SLIDE |
| TMHAS09-10-00 | SAFETY STAY |
| TMHAS10-10-00 | AUXILIARY JACK |
| TMHBS10-10-00 | Brace-Hold Open Cowls |
| TMHBS13-00-00 | Brace-Hold Open Cowls (V2500) |
| TMHBS19-00-00 | BRACE-HOLD OPEN COWLS |
| TMHDI43-32-00 | AIRCRAFT PART |
| TMHEC29-00-00 | TOOL |
| TMHGA38-00-00 | TOOL |
| TMHSD09-10-00 | V2500 IDG REMOVE/INSTALL-JACK |
| TMHSD09-60-00 | IDG R/I |
| TMHSD10-20-00 | HOIST-ACCESSORY,IDG R I FOR CFM56-5 |
| TMHSD10-22-00 | TOOL |
| TMHSD10-60-00 | SUPPORT IDG R/I |
| TMHTB03-11-05 | SHEAR PIN ATR |
| TO6762-1 | OVER PRESSURE FIXTURE |
| TZ-2255 | TOOL INSERT REPLACEMENT |
| TZ-3600 | TOOL INSERT |
| TZ-6368 | CERAMIC PIN REPLACE-MENT TOOL SET |
| U21828010 | TOOL |
| U21829 | STRESSING FIXTURE |
| U21830000 | EXTRACTOR |
| U21841000 | EXTRACTOR |
| U21842000 | EXTRACTOR |
| U21849000 | WRENCH |
| U21849000-1 | WRENCH WRENCH |
| U21891000 | FILLING |
| U21891000-1 | TOOL |
| U21892 | TOOL - HOLDING |
| U21895200 | HOISTING DEVICE HANDLING TOO |
| U21895200-1 | HOISTING DEVICE HANDLING TOOL |
| U21895200-2 | TOOL |
| UL16357 | TOOL |
| UT1067 | TOOL |
| UT1271 | TOOL |
| UT630-2 | SPANNER - TORQUE TIGHTEN, VARIOUS APPLICATIONS |
| UT818 | SPANNER - TORQUETIGHTEN |
| UT819 | TOOL |
| UT841 | WRENCH - R/I OIL PUMP |
| UT841-43 | TOOL |
| UT865 | ADAPTOR-INHIBITING |
| UT894 | WRENCH |
| UT954 | ADAPTER |
| UT977 | TOOL |
| UT984 | ADAPTER - LP FUEL |
| V2500 | TOOL |
| V2506J06-003 | TOOL |
| VF1620AA0-T504 | DISASSEMBLY TOOL |
| VF1620AA0-T520 | BUSH DISASSEMBLY TOOL SPECIAL |
| VG2-68 | TOOL |
| WDSM-A320&B737 | TOOL |
| WL07J99 | TOOL |
| WL08J99 | TOOL |
| WL14L96A | TOOL |
| WL15L96A | INLET COVER CFM |
| WSM-A320&B737 | TOOL |
| WT-103061 | Assembly Tool |
| XPWA212031 | TOOL |
| YTF-100ZT | TOOL |
| ZZNWS | TOOL |
| 9C6030P01 | TOOL |
| YA145-2 | TOOL |
| G28010-1 | TOOL |
| HU37583-2 | TOOL |
| 351-7000-2GSE | TOOL |
| 2MIT65B0401141 | TOOL |
| A090032 | TOOL |
| 98A54003002003 | TOOL |
| 98A54003002004 | TOOL |
| 98A54003013000 | TOOL |
| K71001-141 | TOOL |
| 415200GSE2-1001 | TOOL |
| AGE13320 | TOOL |
| 2370-T050-401 | TOOL |
| AGE-03544-403 | TOOL |
| AGE-04369-401 | TOOL |
| 856A2930G03 | TOOL |
| Aircraft Chocks Orange 600mm lang | TOOL |
| 98D5210350000 | TOOL |
| 190T05590-401 | TOOL |
| C36001-68 | TOOL |
| C36001-66 | TOOL |
| C36001-69 | TOOL |
| 25 | TOOL |
| 114 | TOOL |
| 320 | TOOL |
| 1100 | TOOL |
| 1665 | PORTABLE WATER CART WITH HONDA ENGINE |
| 3251 | TOOL |
| 3849 | TOOL |
| 5265 | TOOL |
| 7031 | TOOL |
| 7102 | TOOL |
| 8111 | TOOL |
| 8112 | TOOL |
| 8340 | TOOL |
| 9003 | TOOL |
| 9011 | TOOL |
| 9012 | TOOL |
| 9565 | TOOL |
| 11960 | TORQUE EQUIPMENT - VERTICAL FIN, ULTRASONIC |
| 12901 | TOOL |
| 16536 | TOOL |
| 16540 | LEVER ASSY |
| 20507 | TOOL |
| 30205 | TOOL |
| 36020 | TOOL |
| 49935 | TOOL |
| 59250 | TOOL |
| 59275 | TOOL |
| 64192 | TOOL |
| 74606 | TOOL |
| 76460 | TOOL |
| 76908 | STRUT, ALTERNATOR |
| 77144 | TOOL |
| 81205 | TOOL |
| 84971 | TOOL |
| 91335 | TOOL |
| 93103 | TOOL |
| 110178 | TOOL |
| 110179 | TOOL |
| 110180 | TOOL |
| 112906 | TOOL |
| 123990 | TOOL |
| 126100 | TOOL |
| 130916 | TOOL |
| 134515 | TOOL |
| 134875 | TOOL |
| 135974 | TOOL |
| 136016 | TOOL |
| 139010 | TOOL |
| 173778 | TOOL |
| 190446 | TOOL |
| 202577 | TOOL |
| 209252 | TOOL |
| 214307 | TOOL |
| 220544 | SEALANT NOZZLE - 1/4 NPT FITTING, 4 INCHES LONG WITH 1/16 INCH ORIFICE |
| 258334 | PLUG |
| 263192 | TOOL |
| 287559 | TOOL |
| 289782 | TOOL |
| 290435 | ADAPTER ASSEMBLY VALVE TEST SET |
| 294632 | TOOL |
| 296252 | TOOL |
| 296253 | TOOL |
| 296254 | TOOL |
| 296255 | TOOL |
| 296259 | TOOL |
| 296260 | TOOL |
| 296264 | TOOL |
| 323500 | TOOL |
| 324301 | TOOL |
| 325344 | TOOL |
| 432275 | TOOL |
| 458481 | TOOL |
| 508747 | TOOL |
| 576241 | TOOL |
| 673410 | TOOL |
| 708502 | TOOL |
| 713292 | TOOL |
| 713293 | TOOL |
| 716182 | TOOL |
| 716183 | TOOL |
| 726372 | TOOL |
| 733273 | TOOL |
| 772292 | TOOL |
| 800619 | TOOL |
| 800808 | TOOL |
| 800818 | TOOL |
| 800838 | TOOL |
| 801221 | TOOL |
| 806417 | TOOL |
| 828744 | TOOL |
| 833184 | TOOL |
| 844497 | Non-Recoil Cap - Discharge Head Outlet, Cargo Fire Bottle |
| 912948 | TOOL |
| 1013832 | TOOL |
| 1013833 | TOOL |
| 1016309 | TOOL |
| 1068226 | TOOL |
| 1068319 | TOOL |
| 1150595 | TOOL |
| 1610000 | TOOL |
| 1668155 | TOOL |
| 1708263 | TOOL |
| 1900070 | TOOL |
| 1900486 | TOOL |
| 1958219 | TOOL |
| 2024236 | TOOL |
| 2061187 | TOOL |
| 2120301 | TOOL |
| 2150916 | TOOL |
| 2308624 | TOOL |
| 2558595 | AXLE PROTECTOR |
| 2558662 | TOOL |
| 2558664 | TOOL |
| 2558665 | TOOL |
| 2558666 | TOOL |
| 2558667 | TOOL |
| 2558668 | TOOL |
| 2558670 | TOOL |
| 2558671 | TOOL |
| 2558672 | TOOL |
| 2558673 | TOOL |
| 2558898 | TOOL |
| 2558909 | TOOL |
| 2560857 | TOOL |
| 2607825 | TOOL |
| 2608811 | TOOL |
| 2612300 | TOOL |
| 2612311 | TOOL |
| 2616571 | TOOL |
| 2888216 | TOOL |
| 3042000 | TOOL |
| 3061300 | TOOL |
| 3084002 | TOOL |
| 3277705 | TOOL |
| 3303553 | TOOL |
| 3505716 | TOOL |
| 3718057 | TOOL |
| 3791273 | TOOL |
| 3916726 | TOOL |
| 3916794 | TOOL |
| 3928013 | TOOL |
| 3936857 | TOOL |
| 3951738 | TOOL |
| 3954693 | TOOL |
| 3955380 | TOOL |
| 3962130 | TOOL |
| 3962639 | TOOL |
| 3981303 | TOOL |
| 3981309 | TOOL |
| 3981315 | TOOL |
| 4066608 | MINI BULB TOOL |
| 4712451 | TOOL |
| 4715285 | TOOL |
| 4715494 | TOOL |
| 4751493 | TOOL |
| 4766820 | spanner |
| 4842025 | TOOL |
| 4916701 | TOOL |
| 4916702 | TOOL |
| 4916707 | TOOL |
| 4916724 | TOOL |
| 4916745 | TOOL |
| 4916753 | TOOL |
| 4916757 | TOOL |
| 4916760 | TOOL |
| 4916764 | TOOL |
| 4916766 | TOOL |
| 4916769 | TOOL |
| 4916770 | TOOL |
| 4916771 | TOOL |
| 4916783 | TOOL |
| 4916785 | TOOL |
| 4916793 | TOOL |
| 4916799 | TOOL |
| 4916801 | TOOL |
| 4936859 | TOOL |
| 4952160 | TOOL |
| 5916710 | TOOL |
| 5916713 | TOOL |
| 5916715 | TOOL |
| 5916716 | TOOL |
| 5916736 | TOOL |
| 5916740 | TOOL |
| 5916742 | TOOL |
| 5916747 | TOOL |
| 5916761 | TOOL |
| 5916784 | TOOL |
| 5916800 | TOOL |
| 5916804 | TOOL |
| 5936854 | TOOL |
| 5952435 | TOOL |
| 5952666 | TOOL |
| 5952920 | TOOL |
| 5953598 | TOOL |
| 5955123 | TOOL |
| 5955282 | TOOL |
| 5961701 | TOOL |
| 5961707 | TOOL |
| 5962136 | TOOL |
| 5962528 | TOOL |
| 5962753 | TOOL |
| 5962754 | TOOL |
| 5962857 | TOOL |
| 5964314 | TOOL |
| 5965489 | TOOL |
| 5965685 | TOOL |
| 5965690 | TOOL |
| 5965693 | TOOL |
| 5965694 | TOOL |
| 5965695 | TOOL |
| 5965696 | TOOL |
| 5966292 | TOOL |
| 5966293 | TOOL |
| 5966324 | TOOL |
| 5966368 | TOOL |
| 5966374 | TOOL |
| 5981300 | TOOL |
| 5981314 | TOOL |
| 7013348 | TOOL |
| 7415300 | TOOL |
| 7415310 | TOOL |
| 7820923 | TOOL |
| 7821343 | TOOL |
| 9501501 | TOOL |
| 10015368 | TOOL |
| 10025251 | TOOL |
| 16987856 | RIGGING PIN - TRANSDUCER UNIT |
| 23053666 | TOOL |
| 23053695 | TOOL |
| 23053696 | TOOL |
| 23053699 | TOOL |
| 23054395 | TOOL |
| 23054817 | TOOL |
| 23055194 | TOOL |
| 23055812 | TOOL |
| 23060656 | TOOL |
| 23063525 | TOOL |
| 23063540 | TOOL |
| 23068546 | TOOL |
| 23068565 | TOOL |
| 23068605 | TOOL |
| 23068624 | TOOL |
| 30840007 | SHUNT DEVICE - FIRE EXTINGUISHER CARTRIDGE, HTL |
| 31001615 | TOOL |
| 34010472 | TOOL |
| 34010486 | TOOL |
| 34010488 | TOOL |
| 34010489 | TOOL |
| 46211025 | TOOL |
| 65446021 | TOOL |
| 65456002 | TOOL |
| 65751250 | TOOL |
| 77249332 | TOOL |
| 83000317 | TOOL |
| 90000581 | TOOL |
| 90002317 | TOOL |
| 201697600 | TOOL |
| 245900178 | TOOL |
| 361012001 | TOOL |
| 450007011 | TOOL |
| 460000728 | TOOL |
| 460001682 | TOOL |
| 460003180 | KEEP RING |
| 460004275 | TOOL |
| 460004331 | DRIFT |
| 460005171 | ASSEMBLY POST |
| 460005842 | TOOL |
| 460005875 | TOOL |
| 460005876 | TOOL |
| 460005877 | TOOL |
| 460005878 | TOOL |
| 460005879 | TOOL |
| 460005880 | TOOL |
| 460005881 | TOOL |
| 460005882 | TOOL |
| 460005883 | TOOL |
| 460005884 | TOOL |
| 460005885 | TOOL |
| 460005887 | TOOL |
| 460005889 | TOOL |
| 460006123 | TOOL |
| 460006124 | TOOL |
| 460006125 | TOOL |
| 460006131 | TOOL |
| 460006151 | EXTRACTOR |
| 460006157 | TOOL |
| 460006208 | TOOL |
| 460006209 | SPH BEARING LOCATOR |
| 460006210 | PINTLE LOCATION ASSEMBLY |
| 460006231 | TOOL |
| 460006232 | TOOL |
| 460006233 | TOOL |
| 460006234 | TOOL |
| 460006246 | ALIGNMENT BAR |
| 460006249 | TOOL |
| 460006250 | PRESS PAD ASSEMBLY |
| 460006251 | TOOL |
| 460006252 | GUIDE BUSH |
| 460006253 | TOOL |
| 460006258 | PRESS PAD |
| 460006259 | PRESS PAD |
| 460006260 | PRESS PAD |
| 460006261 | TOOL |
| 460006262 | TOOL |
| 460006263 | TOOL |
| 460006265 | TOOL |
| 460006268 | PRESS |
| 460006403 | TOOL |
| 460006414 | TOOL |
| 460006418 | TOOL |
| 460006419 | TOOL |
| 460006425 | TOOL |
| 460006426 | TOOL |
| 460006432 | TOOL |
| 460006433 | TOOL |
| 460006435 | TOOL |
| 460006436 | TOOL |
| 460006443 | TOOL |
| 460006444 | TOOL |
| 460006445 | TOOL |
| 460006447 | TOOL |
| 460006449 | TOOL |
| 460006450 | TOOL |
| 460006467 | TOOL |
| 460006483 | TOOL |
| 460006487 | TOOL |
| 460006489 | TOOL |
| 460006490 | TOOL |
| 460006494 | TOOL |
| 460006499 | PRESS PAD |
| 460006553 | TOOL |
| 460006584 | TOOL |
| 460006585 | TOOL |
| 460006586 | EXTRACTOR |
| 460006587 | TOOL |
| 460006590 | TOOL |
| 460006591 | ADAPTER-BOGIE MOUNTING |
| 460007035 | GUIDE CONE, TR-LINK PIN |
| 460007038 | TOOL |
| 460007051 | TOOL |
| 460007052 | GUIDE CONE,APEX PIN |
| 460007057 | TOOL |
| 460007101 | TOOL |
| 460007132 | TOOL |
| 460007133 | TOOL |
| 460007136 | TOOL |
| 460007137 | TOOL |
| 460007138 | TOOL |
| 460007159 | TOOL |
Contact Us
Tel:+86-18221227579
E-mail:terryluo@jxavtech.com
Conntact: Terry+86-19979533636
Add:Room 515,Building D,No 399 Jianyun Road,Pudong New District,Shanghai,China.
Copyright (©) 2022 Shanghai Junxun Aviation Technology Co.,Ltd.
