9C1544G03-ZZTT/ADMWG Detailed Index Table Of P/N - JX 20250701(15)
Time：
2025-07-03
Part NumberDescription9C1544G03Tool set adjustable for seating bolt cdp seal9C15
| Part Number | Description |
| 9C1544G03 | Tool set adjustable for seating bolt cdp seal |
| 9C1546G03 | Hydraulic puller HPC cdp seal |
| 9C1546G05 | Hydraulic puller HPC cdp seal |
| 9C1552G01 | Seating Plate Hpc Rotor Stg 7 Disk/Stg 2-6 Spool |
| 9C1570G01 | Handling adapter front or rear balancing |
| 9C1572G03 | Fixture Heist Hpe Rdtdr Disk And Spool |
| 9C1604P74 | Cbntering tool |
| 9C1604P75 | Cbntering tool |
| 9C1636G02 | Vibrator Blades |
| 9C1666G01 | Gage tube,oil 1-2 brg |
| 9C1697P02 | Shim Stg1 |
| 9C1697P03 | Shim Stg1 |
| 9C1697P04 | Shim Stg2 |
| 9C1697P05 | Shim Stg2 |
| 9C1697P18 | Shim Stg3 |
| 9C1697P19 | Shim Stg3 |
| 9C1758G01 | Rear rotating adapter on cdp seal |
| 9C1871G03 | Tool tilt support'assembly |
| 9C1879G01 | Bearing removal pinion qearshaft |
| 9C1881G01 | Tool set |
| 9C1882G01 | Pusher brg removal |
| 9C1883G02 | Bench,hydraulic press |
| 9C1893G01 | Tool set lifting,fixture |
| 9C1902G01 | Pusher,bearing extractor |
| 9C1912G01 | Bearing installation pto gearshaft agbx assy |
| 9C1949G01 | Bearing race extractor |
| 9C1964P05 | plate locating |
| 9C2053G03 | Tool set shim thickness determination IGBX assy |
| 9C2054G01 | Tool set |
| 9C2100G06 | Stand Assy/Disassy No.c Bearing Housing |
| 9C2101G03 | Installation tool No.2 bearing outer race |
| 9C2102G01 | Pallet |
| 9C2102G02 | Pallet |
| 9C2103G03 | Handling tool No.2 bearing housing |
| 9C2104G01 | Tool,retaining No.2 bearing ball |
| 9C2105G03 | Adaptator Wrench'Advance' |
| 9C2107G01 | Installation tool fan shaft extension |
| 9C2108G01 | Tool setting No1 bearing inner race |
| 9C2108G02 | Tool setting No1 bearing inner race |
| 9C2111G02 | Handling tool shaft fwd fan |
| 9C2112G03 | Stand assy/disassy No.2bearing assy |
| 9C2113G01 | Tool settling fan shaft extension |
| 9C2122G03 | Adaptator wrench 'advance' |
| 9C2127G02 | Stdcking,pallet mod.24 with protection cover |
| 9C2141G02 | Stand assy/disassy No.1 bearing |
| 9C2146G01 | Tool check location of tube oil supply |
| 9C2147G02 | Nozzle jet targeting tool |
| 9C2148G01 | Nozzle plug oil-No 1 brg |
| 9C2151G02 | Adaptator wrench advance |
| 9C2157G02 | Master hpcr blade stg2 |
| 9C2162G01 | Fixture inner race bearing roller cylindrical No1 |
| 9C2172G01 | Storage Pallet Spool And Disk |
| 9C2173G02 | Tool settling spool booster |
| 9C2178G01 | blade spacing tool |
| 9C2200G02 | Bracket set fan frame rollover stand |
| 9C2202G02 | Puller fwd |
| 9C2204G01 | Tool Setting For Adjustment Of Vbv |
| 9C2206G01 | Handling fixture igb |
| 9C2207G01 | Seating tool ring igv |
| 9C2230G01 | Tool set seating bolt cone shaft |
| 9C2233G01 | Adaptater Ring SpOOL Stg 7-9 |
| 9C2245G02 | Hydraulic puller ring tube sptr |
| 9C2247G01 | Shim hpc rotor balancing |
| 9C2248G01 | Pin guide HPC ring tube |
| 9C2251G04 | Adapter balancing hpc rotor |
| 9C2252G02 | Assembly sector HPC rotor |
| 9C2254G01 | Jack screw |
| 9C2255G03 | Fixture Hdist Hpcr Disk 6-7 |
| 9C2257G02 | Hydraulic puller cone shaft |
| 9C2260G02 | Tool settling hpc stg 1 blisk |
| 9C2263G02 | Handling plate FWD HPC rotor spool 2-5/disk 6/spool 7-9/cdp seal |
| 9C2264G02 | Lock wrench of nut hpc ring tube sptr |
| 9C2265G01 | Pin Guide Hpc |
| 9C2267G02 | Base plate ststic balance hpcr |
| 9C2270G01 | Gage blade lock seating |
| 9C2275G02 | Lifting Tool Rool Rotor Hp 06/Spool 2-5/Blisk Cone Shaft Or Rotor Chp |
| 9C2275G04 | Lifting Tool Rool Rotor Hp 06/Spool 2-5/Blisk Cone Shaft Or Rotor Chp |
| 9C2276G01 | Pin Guide cop seal |
| 9C2282G01 | Master blisk stg 1 |
| 9C2282P03 | Nut |
| 9C2291G02 | Check Pin |
| 9C2293G03 | Puller kit bushings outer stg 1-2-3 |
| 9C2301G04 | Tool set guide pin |
| 9C2304G02 | Check pin |
| 9C2309G01 | Tool check turnbuckle stgs 1 to 3 and igv |
| 9C2312G03 | Ring strengthening case extension |
| 9C2315G02 | Fixture lift |
| 9C2321G03 | Tool setting seal rotating no 3 bearing |
| 9C2337P13 | Support |
| 9C2341G02 | Kit wrench torque loosen flange vane assy stg.5 |
| 9C2352G03 | Guide pin set |
| 9C2362G03 | Centering Fixture |
| 9C2364P19 | Protector |
| 9C2365G03 | Fixture,handling bearing assembly No.2 |
| 9C2365P17 | Support |
| 9C2367G02 | Fixture,handling feame assy |
| 9C2374G01 | Drive handle ring actg igv stg1-2-3 |
| 9C2377G01 | Stand assembly |
| 9C2386G01 | Protector bearing no 2 |
| 9C2398G01 | Support extension case |
| 9C2414G02 | Centering checking fixture-hpcs shroud stage 5 |
| 9C2420G03 | Extractiing tool kit outer bushings vsv hpc |
| 9C3000G03 | Fixture,guide-lpt midshaft extension |
| 9C3004G01 | Fixture Build Up-Lpt Nozzle Stage 2& Stage 3 |
| 9C3008G01 | Fixture Extension-Disk Hp Turbine Stage 1 |
| 9C3009G01 | Puller-No 4 brg aft rotating oil seal |
| 9C3017G01 | Fixture, Locatingoutlet Guide Vane Nut Plate |
| 9C3019G02 | Cover Closure Flow Test-C-Sump Carbon Seal |
| 9C3031G01 | Stand,setup-torque fixture,hpt air duct |
| 9C3032G01 | Fixture Forward-Lift And Turn Fan Hub Frame |
| 9C3033P1 | Screw,skt hd w/washer |
| 9C3034G01 | Guide, Alignment Hpcr To Hpcs，Core Engine |
| 9C3036P16 | Bar，clamp |
| 9C3043G01 | Fixture,clamp-hpt rotor stage 1 blades |
| 9C3043G02 | Fixture,clamp-hpt rotor stage 1 blades |
| 9C3051G01 | Strap, Supportinstl/ Rmv Fadec |
| 9C3063G01 | Fixture,restraining-lpt stg 1 noz trnsn duct seal support |
| 9C3066G01 | Fixture,restraining-ogv stage 9 |
| 9C3077G01 | Fixture,restraining-no 1 bearing stationary seal |
| 9C3090G01 | Bracket,set-fhf horizontal support |
| 9C3124G01 | Fixture inspection stg 6 lpt blades |
| 9C3124G04 | Fixture inspection stg 6 lpt blades |
| 9C3129G01 | Fixture,spread-fan blades |
| 9C3140G05 | Fixture,install-hp turb inner stg seal |
| 9C3151G01 | Puller,bearing-oil scoop |
| 9C3165G04 | Fixture,torque reaction-lpt shaft to electronic nutrunner |
| 9C3165P03 | Sleeve |
| 9C3169G01 | Fixture,Lift/support stage 2 high pressure turbine nozzles |
| 9C3178G01 | Tool set,align/install-tube,air stg 2 hp turb |
| 9C3178G02 | Tool set,align/install-tube,air stg 2 hp turb |
| 9C3188G01 | Fixture, Lift- Booster & Core Stand |
| 9C3305G01 | Adaptator wrench”advance“ |
| 9C3309P28 | Fixture,Strongback,Lift,Turn& Restrain-Lp Turnine ,Module |
| 9C3329G01 | fixture base water wash grind |
| 9C3402G02 | Bar lift&turn hp compressor |
| 9C3408G01 | Fixture,lift&turn-fan stator assy,aft |
| 9C3408G02 | Fixture,lift&turn-fan stator assy,aft |
| 9C3408P02 | Block,guide |
| 9C3411G04 | Fixture,torque reaction-lpt shaft to electronic |
| 9C3411P13 | Sleeve,shaft protector |
| 9C3420G01 | Aft fan case drill fixture |
| 9C3425G01 | Fixture, Lift- Booster & Core Stand |
| 9C3426G01 | Fixture Torque-Inner Spanner Nut |
| 9C6001G05 | Stand, Shipping/ Changeout-Eng |
| 9C6018G01 | Adapter,Lift-Engine, Fwd |
| 9C6020G04 | Fixture,lift-engine/propulsor |
| 9C6020G05 | Fixture,lift-engine/propulsor |
| 9C6020P34 | Adapter fwd,propulsor |
| 9L6452-04-P02 | Sector |
| 9L6452-04-P04 | Hook |
| 9L6452-05-P03 | Base Sector |
| 9L6452-06C-P05 | Knurled Knob |
| 9L6452-06C-P10 | Hand Knob |
| 9L6610-04B-P02 | Central Plate |
| 9L6610-04B-P06 | Clevis |
| 9L6610-04B-P08 | Counter Weight |
| 9L6610-05B-P04 | External Plate |
| 9L6610-05B-P05 | External Plate |
| 9L6610-05B-P09 | Lock |
| 9L6610-05B-P10 | Plate |
| 9L6610-05B-P11 | Spacer |
| 9L6610-05B-P12 | Axis |
| 9L6610-05B-P13 | Axis |
| 9L6610-10C-P27 | Clevis |
| 9L6834-05D-P04 | Plot |
| 9L6834-05D-P06 | Block Support |
| 9L6834-05D-P07 | Anti Rotation |
| 9L6834-05D-P08 | Disc |
| 9L6834-05D-P09 | Support Protection |
| 9L6834-05D-P10 | Thrust Axle |
| 9L6834-07D-P12 | Cross Extractiom |
| 9L6834-07D-P13 | Bracket Extraction |
| 9L6834-07D-P14 | Retainer |
| 9L6834-07D-P15 | Support Ring Extraction |
| 9L6834-07D-P16 | Axis Extraction |
| 9R7109G02 | Fixture,inspection-combustion chamber assembly |
| 9T | Ring |
| A320TASK282200720801A | Adapter |
| A359DR-32-7812 | A350 landing gear target |
| A663159 | Hex screw |
| A-958-002 | Wr62 RJL-Rotor Waveguide |
| A-958-007 | Stator Launch Pin |
| A-958-013 | Shim (Bearing) |
| A-960-001 | Magic T to horn-channel |
| A-960-019 | Magic T to coax Probe |
| A-960-032 | WR62 WG to magic T-channel |
| A-960-033 | WR62 WG to magic T-Lid |
| A-960-034 | WR62 Magic T to horn-Channel |
| A-960-035 | WR62 Magic T to horn-Lid |
| AE3663229E0097 | Hose assy |
| AEROYL2TMM-1B4M | 2T hoist |
| AEROYL5TMM-2B4M | 5T hoist |
| AETL35679 | Extractor tool |
| AGE-03300-001 | Arm-locking upper pear aluminum |
| AGE-03300-002 | Arm-locking upper pear aluminum |
| AGE-03382-401 | Hold open rod assy |
| AGE-05060-402 | Lifting assy |
| AGE-05060-403 | Lifting assy |
| AGS1551-4 | Spirol Pin |
| AGS1551-5 | Spirol Pin |
| AJA57503449 | Flap Fairing Rig Tool |
| AJA57503451 | Hev vane in |
| AM01137902 | AM battery cell extraction tool motor mounting base |
| AN3-11A | Bolt |
| AS1895/14-100 | Plug |
| AS1895/14-125 | Plug |
| AS1895/14-150 | Plug |
| AS1895/14-175 | Plug |
| AS1895/14-200 | Plug |
| AS1895/15-100 | Plug |
| AS1895/15-125 | Plug |
| AS1895/15-150 | Plug |
| AS1895/15-175 | Plug |
| AS1895/15-200 | Plug |
| AS1895/15-350 | Plug |
| AS24563TYPE 7-400 | Plug |
| AS5174J0804 | Fitting，union and reducer，flared |
| AS5174J1208 | Fitting，union and reducer，flared |
| AS5174J1608 | Fitting，union and reducer，flared |
| AS5174J2012 | Fitting，union and reducer，flared |
| ASM3 | Film rack |
| AST-2877 | Wrench |
| AT55772-F | Dressing stand |
| AY969-00667-001 | Cable assy |
| AY969-00668-001 | Cable assy |
| BAB625C10B14 | Ball lock pin |
| BLC6T14-L8C8 | Pin |
| BLC7T15-L8C8 | Pin |
| BLDC-3-18 | Pip pin |
| BLS12TA16S | Pin ball lock |
| BLS16TA10S | Pin ball lock |
| BLS16TA29S | Pin ball lock |
| BLS4R17N | Pip pin |
| BM5E22Z11 | Comepi - Upper and Lower 'Z' Limits |
| BS4320 | Washer form'A' |
| C01612001-GTOO02-0001-A | Slat Brake Socket Tool |
| CB02997 P02 | Shroud Guard |
| CBAero 106 Sht 6-P12 | Front Pedestal Clevis Support |
| CBAero 106 Sht 6-P13 | Front Pedestal Base Clevis |
| CBAero 106 Sht 6-P14 | Front Pedestal Swivel Base |
| CBAero 106-06-P12 | Front Pedestal Clevis Support |
| CBAero 106-06-P13 | Front Pedestal Base Clevis |
| CBAero 106-06-P14 | Front Pedestal Swivel Base |
| CBAero 107 Sht 7-P14 | Front Pedestal Wear Washer |
| CBAero 107 Sht 7-P15 | Front Pedestal Adjust Nut |
| CBAero 107 Sht 7-P21 | Spanner |
| CBAero 107 Sht 8-P12 | Front Pedestal Clevis Support |
| CBAero 107 Sht 8-P13 | Front Pedestal Locking Pin |
| CBAero 107 Sht 8-P16 | Front Pedestal Base Clevis |
| CBD20185G01 | Plate blanking assy |
| CBD20242K01 | Kit,gauge calibration |
| CBD20243K01 | Kit,gauge calibration |
| CBD28200K01 | KII,Blanking ccoc |
| CFM56-7B-CAN-CRC-001 | CFM56-7B Tail Nozzle Front Connection Ring Flatness Inspection Platform |
| CL-10-DEP-3.0 | Ball lock pin |
| CL-16513 | Knurled knob |
| CL-1-KN | Knurled nut |
| CL-5-BLPR-1.50-S | Ball Lock Pins |
| CL-5-BLPR-2.00-S | Ball Lock Pins |
| CL-5-BLPR-4.00-S | Ball Lock Pins |
| Clamp-1 | Clamp |
| Clamp-2 | Clamp |
| Clamp-3 | Clamp |
| CP30350-1 | handling adaptor |
| CP30369 | Handling adaptor-fan duct rear stiffener |
| CP30379-8 | Handling adaptor-fan case-strong ring |
| CP30445-1 | Sling por parking/turnover frames |
| CP30447-1 | Translating sleeve-lifting sling |
| CP30447-2 | Master link |
| CP30447-3 | TOOL |
| CP30502-2 | Trunnion assy(fabricated) |
| CP30554 | Adapter lift and turn module 2 |
| CP30600-2 | Trunnion assy transit stand |
| CP30768 | Document case |
| CP30816 | Frame,turnover |
| CP30818 | Geared turnover frame-SWL317KG |
| CP30826-1 | Frame,turnover |
| CP30829-1 | Geared turnover frame swl 1016 kg |
| CP30860-2 | Engine transportation staand（multi-purpose） |
| CQ-TRWC-320M-001 | A320 main landing gear training device |
| CST-2987 | Hand handle equipment |
| CT634-2000A-1 | Clip plate |
| CT634-2000A-2 | Pin |
| CZJ-05475-02 | Block assembly |
| CZJ-05475-03 | Block assembly |
| CZJ-05475-05 | Block assembly |
| CZX-20803-0102 | Oxygen filling test module |
| D000-10600-000-W8200-01-00/-106 | Ring mutter |
| D000-10600-000-W8200-81A0001-00-401 | Section Trolley 11-14 Fuselage Supporting Plate-01 |
| D000-10600-000-W8200-81A0001-00-402 | Section Trolley 11-14 Fuselage Supporting Plate-02 |
| D000-10600-000-W8200-81A0004-00-401 | Section Trolley 11-14 Fuselage Supporting Plate-03 |
| D000-10600-000-W8200-81A0004-00-402 | Section Trolley 11-14 Fuselage Supporting Plate-04 |
| D000-10600-000-W8200-81A0004-00-403 | Section Trolley 11-14 Fuselage Supporting Plate-05 |
| D000-10600-000-W8200-81A0004-00-404 | Section Trolley 11-14 Fuselage Supporting Plate-06 |
| D000-59000-001-W8200-81A0006-01-*** | Trolley wing A319/A320 cover |
| D000-74036-120W8310-81A00 | Spcer |
| D2100344 | Welding expander |
| D243-90148-000W8200-01 | Assembly LAV-Transporgwagen |
| D253-90033-004W8230-01A00 | Tritt schutzblech |
| D262-10060-000W6400-01-214 | Pin |
| D274-00000-000L9600-01-00-102 | Rigging pins |
| D274-00000-000L9600-01-00-103 | Rigging pins |
| D280-00005-000W8600-01A00 | Valve blank device |
| D280-00031-000W8230-03A00 | Clack valve blank adapter for fuel jet pump |
| D321-04018-000L9600-01 | Setting tool-uplock |
| D321-56003-000W6400-30-00 | Threaded rod |
| D3725070 | Front kitchen knob mounting base |
| D533-10151-001W2300-01 | Fastening spigot |
| D533-10151-001W2300-01/101 | Fasten pin |
| D533-10151-001W2300-01/106 | Pin guide |
| D533-10151-001W2300-01/113+114 | Fastening spigot |
| D533-76035-000W8230-84 | Seat lower floor protection |
| D534-74000-000-W8200-81A0004-00-401 | Section Trolley 11-14 Fuselage Supporting Plate-07 |
| D534-74000-000-W8200-81A0004-00-402 | Section Trolley 11-14 Fuselage Supporting Plate-08 |
| D534-74000-000-W8200-81A0007-00-200 | Section Trolley 11-14 Fuselage Supporting Plate-09 |
| D534-74016-016W8230-01 | Floor panel |
| D536-71141-000W8000-84 | Floor panel |
| D570-04022-000W8500 | Adapters for safety line bracket |
| D570-04022-000W8500-12-02-01-00-05 | Special bolts |
| D570-74040-000W0300-42 | Testbohrstand Fuer Crownies c-buegel-adu |
| D570-74040-000W0300-44 | Testplatte 8 V2 crown fit |
| D571-33318-000W6400-01 | Abst andmessgeraet vorderholm |
| D571-33321-000L9600-40 | Winkelspion |
| D573-56843-000W8210-04A00 | Aileron panel storage |
| D85-3000 | Pulley lever |
| D85M-3T3.5M | Chaine hoist 'pull lift' |
| D85M-6T3.5M | Chaine hoist 'pull lift' |
| D923-10100-000W8230-01A00 | Wave-guide abdeckung |
| D97B00-003-b | Ground support equipment |
| DIA-16X1 | PROTECTION(PART OF TOOL KIT 98A27508060000) |
| DIN 894-30 | Open end spanner |
| DIN 894-50 | Open end spanner |
| DIN11024 | Clip |
| DIN125-B8.4 | WASHER(PART OF TOOL KIT 98A27508060000) |
| DIN1478 SPM16 | Turnbuckle |
| DIN1543-6X20X20 | PLATE(PART OF TOOL 98A27508060000) |
| DIN471 | Retaining ring |
| DIN82101-A0.4 | Shackle |
| DIN94-2X14 | PIN-COTTER(PART OF TOOL 98A27508060000) |
| DIN961 M10×35 | Hexagon head screw |
| DKR142 | Fitting |
| DRT60453 | Test adaptor |
| DRT61530 | Drift |
| DRT65482 | Alignment bullet |
| DRT65691 | Holding tool |
| DRT65747 | Augnment bar |
| DRT65766 | Thumb nut |
| DRT65879 | Torque adaptor |
| DRT65983 | Bullet-alignment |
| DRT65984 | Torque adaptor |
| DRT66032 | Tube spanner |
| DRT66042 | Lifting tackle |
| DRT66049 | Aligning pin |
| DRT66218 | Spanner-PEG |
| DRT66394 | Alignment bullet |
| DRT66395 | Torque adaptor |
| DRT66756 | Checking gauge |
| DRT67097 | Assembly post |
| DRT67098 | Spanner，torque link |
| DRT67115 | Spanner trimmer link nut |
| DRT67117 | Spanner artic link nut |
| DRT67188 | Guide cone，retract actuator |
| DRT67208 | Spanner |
| DRT67211 | Reactor bogie pin |
| DRT67213 | Spanner，lower cardan |
| DRT67214 | Cone-guide，bogie pin |
| DRT67225 | Guide cone art link pin |
| DRT67364 | Alignment bullet |
| DRT67381 | Pin spanner |
| DRT67395 | Torque adaptor |
| DRT67411 | Torque reaction adaptor |
| DRT68003-1 | Barrel |
| DRT68003-2 | Lead screw |
| DRT68003-20 | Pin |
| DRT68003-22 | End cap |
| DRT68003-24 | End cap |
| DRT68003-25 | Caphead screw |
| DRT68003-26 | Caphead screw |
| DRT68003-27 | Caphead screw |
| DRT68003-32 | Caphead screw |
| DRT68003-34 | Stud |
| DRT68003-35 | Spring |
| DRT68003-36 | Washer |
| DRT68003-37 | Caphead screw |
| DRT68003-38 | Pin |
| DRT68003-43 | Thrust bearing |
| DRT68003-44 | Thumb nut |
| DRT68003-45 | Bolt |
| DRT68003-46 | Nut |
| DRT68003-47 | Collar |
| DRT68003-48 | Washer |
| DRT68003-7 | Seating block |
| DRT68003-8 | Seating block |
| DRT68006-11 | Tie rod |
| DRT68006-13 | Stud |
| DRT68006-14 | Collar nut |
| DRT68838-10 | M20 stud |
| DRT68838-15 | Washer |
| DRT68838-8 | Collar nut |
| DRT68838-9 | Collar nut |
| DRT68839-7 | Pip pin |
| DRT68923-8 | Warning streamer |
| DRT68923-9 | Warning streamer |
| DRT86031 | Tube spanner |
| E1.C1A.070.062 | Testing fixture - Static torque measurement fixture for fan blades (C1A) |
| E1.C1A.070.064 | Testing equipment: Static torque measurement fixture for the first stage of the high-pressure turbine blades (C1A-04) |
| E1.C1A.070.066 | Measuring device - Measurement of the lip position of the vent valve |
| E1.C1A.070.093 | Testing equipment - Cone gear installation adjustment device (C1AH-05) |
| E1.C1A.070.113 | Measurement tool / toothed disc heart rate measurement fixture (C1A-101) |
| E1.C1A.070.114 | Testing equipment: Fan motor gear wear ring (with fan blades) vibration measurement fixture |
| E1.C1A.350.452 | Assembly tooling - Low-pressure turbine unit storage and transportation vehicle |
| E1.C1A.350.499 | Back-end crane transportation storage vehicle |
| E1.C1A.350.593 | Assembly tooling - Overall installation fixture for the three-guide component |
| E1.C1A.350.598 | Assembly disassembly fixture - Front end support adapter for rotor (C1AH-04) |
| E1.C1A.350.709 | Assembly disassembly fixture - High turbidity guide assembly auxiliary support tooling |
| E1.C1A.350.712 | Assembly tool: High-turbine second-stage guide vane clamping tool |
| E1.C1A.350.758 | Assembly disassembly tool, rotor-stator storage base |
| E1.C1A.350.796 | Assembly fixture - Prototype machine core machine assembly base (C1A-101) |
| E1.C1A.350.798 | Assembly disassembly fixture / Core machine assembly base (C1A.101) |
| E1.C1A.350.799 | Assembly disassembly fixture - Driving gear shaft press-fitting tooling |
| E1.C1A.350.811 | Assembly and disassembly fixture - Front end support mounting seat of the first-stage impeller (C1AH-101) |
| E1.C1A.350.870 | Drill tool No. 2 bearing inner ring disassembly fixture (C1A-101) |
| E1.C1A.350.871 | Pliers No. 2 pivot support seat disassembly fixture (C1A-101) |
| E1.C1A.350.872 | Drill tool No. 1 bearing inner ring disassembly fixture (C1A-101) |
| E1.C1A.350.873 | Assembly and disassembly fixture for fan shaft and two-point component support frame (C1A-101) |
| E1.C1A.350.874 | Tighten the tooling for the 2nd bearing inner ring locking nut. Tooling for tightening the locking nut of the 2nd bearing (C1A-101) |
| E1.C1A.350.876 | Tighten the tooling Two-point compression nut tightening tool (C1A-101) |
| E1.C1A.350.877 | Tighten the tooling A tightening tool for the front toothed disc of the point (C1A-101) |
| E1.C1A.350.879 | Pressing tool No. 2 bearing inner ring pressing device (C1A-101) |
| E1.C1A.350.880 | Pressing tool No. 1 bearing inner ring pressing device (C1A-101) |
| E1.C1A.350.881 | Assembly tooling Front protection sleeve for the fan shaft of the 1-2 pivot unit (C1A-101) |
| E1.C1A.350.882 | Assembly disassembly fixture - 3# bearing disassembly tooling |
| E1.C1A.350.883 | Assembly disassembly fixture |
| E1.C1A.350.884 | Assembly disassembly fixture - No. 3 bearing press-fitting tooling |
| E1.C1A.350.885 | Assembly disassembly fixture - Cone gear installation adjustment device (C1A-101) |
| E1.C1A.350.887 | Assembly disassembly fixture |
| E1.C1A.350.894 | Assembly disassembly fixture - Internal transmission rod assembly disassembly |
| E1.C1A.350.895 | Assembly disassembly fixture, pneumatic wrench fixing fixture |
| E1.C1A.350.896 | Pressing tools: Two pressing tools for each of the rear sections of the high-pressure turbine (C1A-06A) |
| E1.C1A.350.897 | Pressing tools |
| E1.C1A.350.898 | Assembly disassembly fixture High-pressure rotor disassembly puller |
| E1.C1A.350.899 | Tightening tool |
| E1.C1A.350.900 | Assembly and disassembly fixture for sealing track assembly and disassembly tooling |
| E1.C1A.350.901 | Assembly disassembly fixture - Outer ring guiding tooling for bearings (C1A-06) |
| E1.C1A.350.904 | Tightening tool - Air duct lifting tightening fixture |
| E1.C1A.350.906 | Pull out the rear chamber cover and disassemble it. |
| E1.C1A.350.908 | Assembly disassembly fixture |
| E1.C1A.350.911 | Pressing tool - 1GB pressing fixture |
| E1.C1A.358.020 | Mock-up Short Cabin Integrated Assembly Engine Mock-up |
| E1.C1A.359.062 | Balancing fixture - Low-pressure turbine rotor-stator balancing tooling |
| E1.C1A.364.342 | Sealing pressure testing equipment calibration fixture |
| E1.C1A.364.344 | Inter-level machine valve sealing pressure test fixture (C1A-03) |
| E1.C1A.364.346 | Front and rear stationary unit body sealing pressure test fixture (C1A-02) |
| E1.C1A.364.347 G01 | Sealing inspection fixture for the stator unit of the low-pressure turbine rotor |
| E1.C1A.364.347 G02 | Sealing inspection fixture for the stator unit of the low-pressure turbine rotor |
| E1.C1A.364.376 | The intermediate casing plug for the entire machine's pressure-holding mechanism |
| E1.C1A.364.383 | Sealing pressure test fixture for the rear end plug of the Jingzi machine housing (C1A-02) |
| E1.C1A.364.395 | Test fixture Core machine main unit body sealing pressure testing jig |
| E1.C1A.364.452 | C1AH-06 Complete Machine Sealing Test Fixture |
| E1.C1A.364.453 | Experimental fixture - Two-point support unit body sealing inspection tool |
| E1.C1A.364.454 | Experimental fixture |
| E1.C1A.364.455 | Test fixture - Two-point unit body flow experiment tooling |
| E1.C1A.364.475 | Test fixture - Three-point circumferential seal component leakage inspection (C1A-07) |
| E1.C1A.380.014 | Storage vehicle - Fan boost stage component balance fixture storage vehicle |
| E1.C1A.380.020 | Transportation device - Low-pressure turbine rotor-stator dynamic balance fixture storage rack |
| E1.C1A.380.021 | Storage vehicle for boost stage components (C1A) balance fixture storage vehicle |
| E1.C1A.380.027 | Storage vehicle - Rotor vertical storage vehicle (C1A) |
| E1.C1A.380.035 | Assembly vehicle - Intermediate housing component flipping vehicle |
| E1.C1A.380.047 | C1AH-04 and 05 core machine test pieces complete machine transportation vehicle |
| E1.C1A.380.050 | Transportation device, CJ-1000A complete machine assembly standing vehicle frame |
| E1.C1A.380.054 | C1A-04A rack for storing AGB |
| E1.C1A.380.055 | Transportation device: C1A-04A complete machine transport vehicle |
| E1.C1A.380.056 | Transportation device - Fan boost stage balance assembly transportation vehicle |
| E1.C1A.380.057 | Assembly tooling - Low-pressure turbine unit storage and transportation vehicle |
| E1.C1A.380.063 | Transportation device (prototype vehicle for the entire machine) |
| E1.C1A.380.065 | Combustion chamber assembly frame |
| E1.C1A.380.069 | Storage rack - Hoisting equipment type tool storage rack (Type A) |
| E1.C1A.380.070 | Storage rack - Hoisting equipment type tool storage rack (Type A) |
| E1.C1A.380.072 | Transportation device - Fan blade storage vehicle |
| E1.C1A.380.073 | Transport device, nacelle integrated assembly frame |
| E1.C1A.380.074 | Air floating transport vehicle |
| E1.C1A.380.075 | Transport device Core engine complete machine storage frame (C1AH) |
| E1.C1A.380.079 | Transport device: C1A - 06A whole - machine transport vehicle |
| E1.C1A.380.082 | Transport device: Vertical storage vehicle for high-vortex rotors (C1A - 101) |
| E1.C1A.380.084 | Transport device C1A - 101, 102, 103 whole - machine transport vehicles |
| E1.C1A.380.085 | Storage vehicle. Core engine horizontal storage vehicle (C1A) |
| E1.C1A.380.090 | Transport device: Core engine complete machine transport vehicle (C1AH - 101) |
| E1.C1A.380.092 | Transport device S5046 test piece transport rack |
| E1.C1A.380.093 | Balanced tooling vertical storage vehicle |
| E1.C1A.380.094 | Transport device |
| E1.C1A.380.095 | Transport device, Storage vehicle for low-pressure turbine balance mandrel |
| E1.C1A.380.097 | Transfer vehicle |
| E1.C1A.380.132 | Transport device C1A - 106 sets of complete machine transport vehicles |
| E1.C1A.381.114 | Lifting tool; Fan booster stage stator positioning tooling |
| E1.C1A.381.129 | Fan rear lifting tool |
| E1.C1A.381.150 | Low-pressure turbine disk turning lifting tool |
| E1.C1A.381.151 | Lifting device; Rear lifting device for the low-pressure turbine adapter shaft |
| E1.C1A.381.153 | Lifting device; Fan casing lifting device |
| E1.C1A.381.154 | Lifting tool |
| E1.C1A.381.155 | Component storage box (Type 600) |
| E1.C1A.384.314 | Component storage box (Model 1000) |
| E1.C1A.384.315 | Component storage box (Model 1400) |
| E1.C1A.384.316 | Other auxiliary devices, Protective caps for the intermediate casing (C1A - 04) |
| E1.C1A.384.319 | Storage vehicle Horizontal storage vehicle for high-pressure compressor rotor (C1AH - 101) |
| E1.C1A.384.336 | Other auxiliary devices, Oil plugging caps for accessories |
| E1.C1A.384.349 | Other auxiliary devices; Accessory oil seal cover II |
| E1.C1A.384.365 | Protection tooling, Plugging tooling for fuel and lubricating oil radiators |
| E1.C1A.384.369 | Protective tooling, Fuel distributor blocking tooling |
| E1.C1A.384.370 | Protective tooling, Plugging tooling for fuel metering device |
| E1.C1A.384.371 | Protection tooling, Servo fuel heater blocking tooling |
| E1.C1A.384.372 | Protective tooling, Plugging tooling for fuel and lubricating oil radiators |
| E1.C1A.384.373 | Protective shield |
| E1.C1A.384.383 | Protective workwear |
| E1.C1A.384.387 | Protective work clothing |
| E1.C1A.384.388 | Protective work clothing, Intermediate casing plug |
| E1.C1A.384.419 | Other auxiliary devices; Storage devices for pipelines |
| E1.C1X.070.012 | Measuring tool, Universal open gauge straightedge |
| E1.C1X.350.351-51 | Assembly tooling; Verification aircraft body assembly column |
| E1.C1X.350.351-52 | TOOL |
| E1.C1X.350.351-53 | TOOL |
| E1.C1X.350.458 | Assembly tooling: Vertical storage rack for low-pressure turbine shaft |
| E1.C1X.380.035 | Frame: Store bicycles by hanging them in an L-shape. |
| E1.C1X.380.056 | Storage rack: Component storage rack (with wheels) |
| E1.C1X.380.057 | Transfer vehicle: Parts transfer vehicle |
| E1.C1X.384.015 | Elevated work platform 1: Standing vehicle for body assembly |
| E1.C1X.384.016 | Elevated work platform: Final assembly standing vehicle |
| E1.C1X.384.057 | Transfer vehicle: Parts transfer vehicle |
| E1.C1X.384.058 | Storage rack: Component storage rack |
| E1.C1X.384.335 | Storage box: Blade storage box |
| E1.C1X.384.336 | Storage box: Small parts storage box |
| E1.C1X.384.337 | Storage cabinet: Rotor disc storage cabinet |
| E1.C1X.384.362 | Component storage box (Model 600) |
| E1.C1X.384.363 | Component storage box (Model 1000) |
| E1.C1X.384.364 | Component storage box (Model 1400) |
| E1.C2A.380.008 | Transport device: CT - 2000A whole machine transport vehicle |
| E1.C2X.070.033 | Receiver runout measurement seat |
| E1.C2X.070.050 | Measuring tool: Used for the calibration of Class C adjustable blades. |
| E1.C2X.350.015 | Puller: High-pressure turbine rotor disassembly puller (2C2C) |
| E1.C2X.350.178 | Assembly tooling: High-pressure compressor assembly seat (2C2C - 104) |
| E1.C2X.350.179 | Assembly tooling: Process front casing (2C2C - 104) |
| E1.C2X.350.244 | Vortex reducer assembly pulling tool |
| E1.C2X.350.248 | Assembly and disassembly fixture: C2X turbine rear engine brake transfer section |
| E1.C2X.350.332 | Assembly and disassembly fixture: Fan casing support |
| E1.C2X.350.372 | Assembly and disassembly fixture: Outer bypass casing storage rack |
| E1.C2X.350.375 | Tightening tool: Fan disc nut tightening tooling |
| E1.C2X.350.378 | Assembly and disassembly fixture: Positioning guide pin |
| E1.C2X.350.388 | Assembly tooling: Column for overall machine assembly (2C2 - 02) |
| E1.C2X.350.391 | Assembly and disassembly fixture: Inter - stage brake assembly positioning support seat |
| E1.C2X.350.392 | Assembly and disassembly fixture |
| E1.C2X.350.393 | Assembly and disassembly fixture |
| E1.C2X.350.394 | Assembly and disassembly tool: Installation tooling for nuts on the first - to third - level discs |
| E1.C2X.350.396 | Assembly and disassembly fixture: Fan blade static moment measurement fixture |
| E1.C2X.350.397 | Tightening tool: Low-pressure shaft connection nut tightening tooling |
| E1.C2X.350.398 | Assembly tooling: Used for fixing the air release valve. |
| E1.C2X.350.399 | Assembly tooling: Assembly tooling for captive nuts of the rear stator casing of the high-pressure compressor |
| E1.C2X.350.400 | Tightening tool: Air duct lifting and tightening tooling (2C2C - 104) |
| E1.C2X.350.403 | Assembly and disassembly fixture: Nut tightening tooling |
| E1.C2X.350.405 | Assembly and disassembly fixture: Transfer tooling for engine transport vehicle (2C2 - 001) |
| E1.C2X.350.406 | Assembly and disassembly fixture: Tooling for tightening the outer ring nut of No. 3 bearing (S7310) |
| E1.C2X.350.407 | Assembly and disassembly fixture: 3Bearing disassembly tooling (S7310) |
| E1.C2X.350.408 | Assembly and disassembly fixture: No. 3 bearing assembly tooling (S7310) |
| E1.C2X.350.409 | Assembly and disassembly fixture, Blade support tooling |
| E1.C2X.350.410 | Assembly and disassembly fixture, Horizontal transfer tooling for intermediate casing |
| E1.C2X.350.411 | Assembly and disassembly fixture |
| E1.C2X.350.412 | Assembly and disassembly fixture, Horizontal-rotation assembly transport vehicle (S7310) |
| E1.C2X.350.413 | Assembly and disassembly fixture; Horizontal-to-vertical core engine rotor disassembly tooling (S7310) |
| E1.C2X.350.414 | Tightening tooling Horizontal-to-vertical three-point support tightening tooling (S7310) |
| E1.C2X.350.415 | Tightening tooling. Horizontal rotation four-point support tightening tooling (S7310) |
| E1.C2X.350.416 | Assembly and disassembly fixture, Horizontal-rotating assembly seat (S7310) |
| E1.C2X.350.417 | Tightening tooling Tooling for tightening the front end cover nut of the horizontal rotating front journal (S7310) |
| E1.C2X.350.421 | Assembly and disassembly fixture, Casing runner protective cover |
| E1.C2X.350.422 | Puller, Removal of the tooth ring (S7310) |
| E1.C2X.350.423 | Tightening tool. Tighten the compression nut (S7310) of the vortex reducer. |
| E1.C2X.364.134 | Test fixture |
| E1.C2X.380.022 | Fan disk and booster stage component transport vehicle |
| E1.C2X.380.023 | Transport device, Balance fixture storage vehicle |
| E1.C2X.380.024 | Fan booster stage transport vehicle |
| E1.C2X.380.027 | Vertical storage cart for high-pressure turbine rotor |
| E1.C2X.380.031 | Core engine (C2XC - 104) complete machine transport vehicle |
| E1.C2X.380.034 | Low-vortex unit storage vehicle |
| E1.C2X.380.035 | Low-vortex rotor horizontal storage vehicle |
| E1.C2X.380.037 | Transport device, Low-vortex rotor horizontal storage vehicle |
| E1.C2X.380.038 | C2X - 02 Intermediate Casing Turning Vehicle for Aircraft Engines |
| E1.C2X.380.039 | Transport device, Vertical storage vehicle for balancing tooling |
| E1.C2X.380.040 | Transport device, Outer bypass casing transport vehicle C2X - 02 |
| E1.C2X.380.041 | Transport device, horizontal transport rack vehicle |
| E1.C2X.380.042 | Transport vehicle: S2015 whole-machine transport vehicle |
| E1.C2X.380.043 | General transporter for high-pressure compressor rotors |
| E1.C2X.380.044 | Low-pressure turbine disk mandrel storage cart |
| E1.C2X.380.049 | Low-vortex rotor unit parking seat |
| E1.C2X.380.050 | ACB flipping vehicle |
| E1.C2X.380.051 | Transport device, Core engine turnover machine |
| E1.C2X.380.055 | Transport device: Fan casing transport vehicle (C2X complete machine) |
| E1.C2X.381.093 | Lifting device, Lifting device at the rear end of the low-vortex unit (C2X - 02) |
| E1.C2X.381.106 | Lifting tool: C2X - 02 lifting tool for the whole machine transport vehicle |
| E1.C2X.381.122 | Lifting tool |
| E1.C2X.381.123 | Lifting tool: Inter - stage casing turning lifting tool (C2X - 001) |
| E1.C2X.381.124 | Lifting device, General flipping lifting device |
| E1.C2X.381.127 | Lifting device, Three-point flipping lifting device (S7310) |
| E1.C2X.381.128 | Lifting device, Four-point flipping lifting device (S7310) |
| E1.C2X.381.129 | Lifting tool: C2XC Ten - stage rectifier lifting tool |
| E1.C2X.384.093 | C2X - 02 whole machine protective tarpaulin |
| E1.C2X.384.094 | Packing box; Transportation packing box for fan booster stage assembly |
| E1.C2X.384.111 | Other auxiliary devices: High-pressure turbine first-stage rotor blade protection cover |
| E1.C2X.384.113 | Protective cover - High-pressure compressor stator honeycomb protective cover |
| E1.C2X.384.120 | Storage cabinet - Pull-out component storage cabinet (4 layers) |
| E1.C2X.384.121 | Storage cabinet - Pull-out component storage cabinet (7 layers) |
| E1.C2X.384.123 | Other auxiliary devices: C2X-02 Complete machine protective cover |
| E2J52189-2 | Engine,turning tool |
| E2J52529 | Punch |
| E2J57952 | Immobiliser |
| E2J59418 | Swaging tool |
| E2J61714 | Guide Pin |
| E2J62390 | Rxtractor |
| E2J62754 | Swaging tool |
| E2J63594 | Blade stop alignment tool |
| E2J64329 | Extraator |
| EBD16075G01 | Stand lay by assy |
| EBD16533G01 | Support,heat,shield |
| EFMC75052 | Cartridge removal tool |
| EFMC75053 | Retract holder removal tool |
| EFMC75106 | FWD/AFT cap retainer tool |
| EFMC75108 | Firing pin assy tool |
| EFMC75112 | Gas pipe assy tool |
| EFMC75114 | Setting tool dowel |
| EFMC75120 | Yoke assy tool FWD |
| EFMC75122 | Yoke assy tool AFT |
| EFMC75128 | Saftey valve tool |
| EFMC75132 | Piston retainer removal tool |
| EH2259.108 | Joint plate |
| EHU50070 | Block,setting |
| EI.CIA.350.701 | Assembly disassembly fixture, engine complete machine support column |
| ENEG2516L | Gauge |
| ES7338-04016 | Cage |
| ES7338-06020 | Cage |
| ES7338-06035 | Cage |
| ES7338-08026 | Cage |
| ES7338-08035 | Cage |
| ES7338-10032 | Cage |
| ES7338-10035 | Cage |
| ES7340-06019 | Roller，short |
| ES7340-06035 | Roller，short |
| ES7340-08026 | Roller，short |
| ES750-7 | Handle |
| ESA-SMA-H310 | 100' Feoc Fegv Hole Drill Jig |
| F1L11150-101 | Shear pin |
| F1L11150-102 | Nut |
| F1L11150-103 | Washer |
| F95000F35110007000 | Plancher protection boite a oxygene |
| F95000F52000001000 | Cadenas sur commande 0Uverture trappes train avant |
| F96000F25010000000 | R0Ulette a joint |
| F96000F25490022000 | Bielle de reglage 200mm |
| F97000F29001016000 | Baches hydrauliques |
| FHC M5*10 | Screw |
| FHC M5*16 | Screw |
| figure 1004A | Wrench Heads |
| figure 1008 | Tapered Rod |
| figure 1009 | Outer Band Nut Box Wrench |
| figure 1025 | Tapered Rod |
| figure 303 | Compressor Rotor Shim |
| figure 315 | Deep Socket Wrench |
| figure 503 | Deep Socket Wrench |
| FIL012101 | Pin rigging |
| FIL012101-1 | Pin rigging |
| FIL012101-2 | Pin rigging |
| FIL012103 | CFM56-5B Inspection caliper |
| FIL012104 | RB211 engine fan disk support ring disassembly tool |
| FIL012106 | Storage box |
| FIL012107 | Removal and installation tool 1 |
| FIL012108 | Brake air release adapter |
| FIL012109 | Low pressure turbine blade cutting |
| FIL012110 | Assembly crane |
| FIL012111 | Pipeline maintenance tools |
| FIL012201 | Landing gear spring tools |
| FIL012205 | Sling for crane disassembly and assembly tools |
| FIL012207 | Sling tool |
| FIL012209 | Hydraulic wheel changing bracket |
| FIL012211 | Vacuum pump hose |
| FIL012212 | A330 crossbeam |
| FIL012301 | BS5200-G1/2 joint |
| FIL012310 | Engine cleaning pipe assembly‐RB211‐535E4 |
| FIL012402 | Guide plate 1 |
| FIL012404 | Plastic plate |
| FIL012410 | Sewage treatment station filtration tank |
| FIL012503 | Top component |
| FIL022102 | Tow bar |
| FIL022103 | CFM56-7B Inspection caliper |
| FIL022106 | Support rod assy |
| FIL022107 | Removal and installation tool 2 |
| FIL022109 | Test fixture |
| FIL022109-2 | Lowering tool |
| FIL022110 | Tool cabinet |
| FIL022201 | Directional lifting tool |
| FIL022206 | Front cargo door lock accessories belt |
| FIL022207 | Backing plate |
| FIL022208 | Oil drain rod |
| FIL022209 | Brake caliper bracket |
| FIL022301 | Hose assy |
| FIL022304 | BS5200-G1joint |
| FIL022306 | High-pressure quick joint |
| FIL022308 | Telescopic tooling |
| FIL022310 | Engine cleaning tube assembly‐CFM56‐3 |
| FIL022312-1 | L-shaped fixing seat |
| FIL022312-10 | Extension rod 1000mm |
| FIL022312-11 | Extension rod flat head |
| FIL022312-12 | Extension rod head 1-1 |
| FIL022312-13 | Extension rod head 2-1 |
| FIL022312-2 | Sensor seat |
| FIL022312-3 | Plate 1 |
| FIL022312-4 | Workbench |
| FIL022312-5 | Workbench 2 |
| FIL022312-6 | Platform support |
| FIL022312-7 | Jack |
| FIL022312-8 | Towing rope retaining post |
| FIL022312-9 | Extension rod 500mm |
| FIL022402 | Guide plate 2 |
| FIL022404 | Several spare parts |
| FIL022409 | Screw |
| FIL022410 | Inclined ski board - 400 |
| FIL022505 | Bolt |
| FIL032102 | Wrench assy |
| FIL032103 | CFM56-5B Inspection tools |
| FIL032104 | Main cargo hold track positioning tool |
| FIL032105 | Seat tracks verticals tool |
| FIL032106 | test fixture |
| FIL032107 | Removal and installation tool 3 |
| FIL032110 | Milling machine tool body assembly |
| FIL032201 | supporting seat |
| FIL032206 | Main hatch lock accessory lanyard |
| FIL032207 | Sling tool |
| FIL032208 | Metal wheel chocks |
| FIL032212 | Pressure training equipment |
| FIL032301 | suspension clasp |
| FIL032304 | Target wheel 1 |
| FIL032307 | Screw assembly |
| FIL032310 | Engine cleaning pipe assembly |
| FIL032402 | Guide plate 3 |
| FIL032404 | Assembly fixture for Leap-1A Combustion chamber01(5) (1) |
| FIL032410 | Direct Push Snowboard - 400 |
| FIL032503 | The helical lifting walking device of the fuselage support frame |
| FIL042103 | CFM56-7B Inspection tools |
| FIL042104 | Support base |
| FIL042105 | Rail positioning tool for main cargo hold |
| FIL042106 | S2009-2 Dynamic Balance Workbench |
| FIL042107 | Removal and installation tool 4 |
| FIL042108 | B7737CL Main Cargo Door Lifting Tools |
| FIL042201 | Engine Fan Cowl Protection Cover |
| FIL042206 | Main Landing Gear Ground Lock Accessories Ribbon |
| FIL042207 | Oil Pipe Switching Overalls |
| FIL042208 | Metal Wheel Chock Storage Trolley |
| FIL042304 | Target wheel 2 |
| FIL042404 | Assembly fixture for Leap-1B Combustion chamber assmbly01(5) |
| FIL042410 | Test vehicle wheel stopper |
| FIL042503 | Work ladder brake |
| FIL042505 | Backup wheel arresting net |
| FIL052105 | Welding auxiliary tool |
| FIL052105-1 | Locking tool（Welding auxiliary tool） |
| FIL052105-2 | Support frame（Welding auxiliary tool） |
| FIL052107 | Removal and installation tool 5 |
| FIL052109 | Tool and Equipment Trailer |
| FIL052201 | Engine Reverser Cowl |
| FIL052206 | Nose Landing Gear Ground Lock Fitting Ribbon |
| FIL052207 | Wooden Pallet 1 |
| FIL052209 | Test Plug Cover |
| FIL052209-1 | Test Plug Cover |
| FIL052209-2 | Test Plug Cover |
| FIL052503 | Assembly Seat Trailer Towing Pole |
| FIL062104 | Fitting & Cap assy |
| FIL062105 | Test cabinet reform |
| FIL062107 | Removal and installation tool 6 |
| FIL062109 | Nitrogen cylinder transport vehicle |
| FIL062206 | A321/A320/B737NG Main Wheels Storage Rack (Single Unit) |
| FIL062207 | Wooden Pallet 2 |
| FIL062307 | The front connector of the fishing rod |
| FIL062404 | Brake ground cooling equipment |
| FIL062410 | Dowel pin |
| FIL062503 | Thread Adaptor 1/8 NPT Female to Dia. M20 x 1.5 Male |
| FIL072105 | Fitting & Cap & wrench assy |
| FIL072107 | Welding auxiliary tool（D2100112） |
| FIL072109 | Trailer-mounted lubricating oil storage cabinet |
| FIL072111 | positioning fixture |
| FIL072112 | Blue system adapter connector |
| FIL072206 | A320/B737NG Front Wheel Storage Rack (Single Unit) |
| FIL072207 | O-shaped front and back tooth clamps |
| FIL072307 | Cup-shaped threaded lock buckle |
| FIL072503 | Thread Adaptor JIC 7/16 x 20 Female to M20 x 1.5 Male |
| FIL082105 | Welding auxiliary tool |
| FIL082108 | Engine transport bracket lower frame |
| FIL082109 | Nitrogen cylinder trolley |
| FIL082112 | D2100463 Welding Fixture |
| FIL082206 | A330 Front Wheel Storage Rack (Single Unit) |
| FIL082207 | Pipe switching fixture |
| FIL082307 | Bow-shaped safety pin (1) |
| FIL082504 | O/B Bearing Cup Removal Tool |
| FIL092105 | Ball lock pin |
| FIL092107 | Tool assy |
| FIL092109 | Aircraft wheel storage trolley |
| FIL092111 | Water trough workbench |
| FIL092112 | High cushion block |
| FIL092202 | Integral welding fixture |
| FIL092206 | A330 main wheel storage rack (single) |
| FIL092504 | I/B Bearing Cup Removal Tool |
| FIL102105 | High-efficiency air compressor performance test piece test hardware |
| FIL102107 | Adjustment support |
| FIL102109 | Wheel replacement trailer |
| FIL102111 | Pipeline manual repair tool |
| FIL102112 | Support seat |
| FIL102202 | Integral welding fixture |
| FIL102206 | Handcart BYB |
| FIL102207 | A330 aircraft hydraulic oil filling/draining device |
| FIL103112-φ1/4'×203mm | locating pin |
| FIL103112-φ1/4'×243mm | locating pin |
| FIL103112-φ1/4'×253mm | locating pin |
| FIL103112-φ1/4'×280mm | locating pin |
| FIL103112-φ1/4'×350mm | locating pin |
| FIL103112-φ10.13-10.08×430mm | locating pin |
| FIL10903 | Galley lifter（single 500KG max load） |
| FIL11010-10-610 | Pin |
| FIL11010-10-S | Handle |
| FIL11010-11 | Locking pin |
| FIL11010-1 | Ball lock pin |
| FIL11010-29 | TOOL |
| FIL11010-30 | TOOL |
| FIL11010-31 | TOOL |
| FIL11010-32 | TOOL |
| FIL11010-37 | TOOL |
| FIL11010-19 | TOOL |
| FIL11010-101 | TOOL |
| FIL11010-103 | TOOL |
| FIL11010-104 | Cushion assy |
| FIL11010-2 | TOOL |
| FIL11010-3 | TOOL |
| FIL11010-4 | Bolts assy |
| FIL11010-5 | Towbar assy |
| FIL11010-18 | TOOL |
| FIL11010-20 | TOOL |
| FIL11010-6-610 | Pin |
| FIL11010-SP | A319/320/321 shear pin |
| FIL1102206 | T4 Shelves |
| FIL11060-1 | Mop head component |
| FIL11060-102 | Dowel pin |
| FIL11060-1-118 | Bushing |
| FIL11060-1-123 | Ball lock pin |
| FIL11060-1408 | Axle assy |
| FIL11060-1409 | Axle assy |
| FIL11060-1414 | Axle assy |
| FIL11060-156 | Shear Indicator Assy |
| FIL11060-18 | Caster |
| FIL11060-2 | Bolt assy |
| FIL11060-3 | Bolt assy |
| FIL11060-4 | Bolt assy |
| FIL11060-27 | Bolt assy |
| FIL11060-300-220 | Traction tube assy |
| FIL11060-300-221 | Head assy |
| FIL11060-300-223 | Traction ring assy |
| FIL11060-310-1 | Tow Head Assy |
| FIL11060-310-2 | Tow Head Assy |
| FIL11060-312 | Traction Tube Assy |
| FIL11060-318 | Traction Ring Assy |
| FIL11060-319 | Fod Collector Assy |
| FIL11060-322 | Tow Plate (737) |
| FIL11060-323 | Connector Weld Assy |
| FIL11060-324 | Connector Flange |
| FIL11060-325 | Connector Plate |
| FIL11060-326 | Tow Plate (A320) |
| FIL11060-330 | Shear Pin |
| FIL11060-332 | Sandwich Plate (Upper) |
| FIL11060-333 | Upper Bush (737) |
| FIL11060-334 | Middle Bush (737) |
| FIL11060-335 | Lower Bush (737) |
| FIL11060-336 | Upper Bush (A320) |
| FIL11060-337 | Middle Bush (A320) |
| FIL11060-338 | Lower Bush (A320) |
| FIL11060-341 | Flange |
| FIL11060-345 | Traction Tube |
| FIL11060-346 | Drawbar Washer |
| FIL11060-353 | Front Cap |
| FIL11060-354 | End Cap |
| FIL11060-355 | Traction Ring Housing |
| FIL11060-360 | Shear Pin |
| FIL11060-361 | Head Retention Bolt |
| FIL11060-362 | Rubber Damper |
| FIL11060-364 | Latch Plate (737) |
| FIL11060-365 | Pivot Block |
| FIL11060-366 | Handle |
| FIL11060-367 | Latch Plate (A320) |
| FIL11060-368 | Link Plate |
| FIL11060-369 | Handle Grip |
| FIL11060-372 | Latch Guide |
| FIL11060-373 | Locking Pin Assy |
| FIL11060-374 | T-Handle |
| FIL11060-376 | Lanyard |
| FIL11060-378 | Fod Collector |
| FIL11060-379 | Sandwich Plate (Lower) |
| FIL11060-380 | Wire Snap Cotter Pin |
| FIL11060-382 | Lanyard |
| FIL11060-5 | Limit pin assy |
| FIL11060-6 | Limit pin assy |
| FIL11060-7 | Limit pin assy |
| FIL11060-8 | Limit pin assy |
| FIL11060-31 | Limit pin assy |
| FIL11060-SP | B737 shear pin |
| FIL11090-100 | Bush |
| FIL11090-112 | Bush |
| FIL11090-113 | Bush |
| FIL11090-800-110 | Rubber Block |
| FIL11090-800-828 | Shear Pin |
| FIL11090-800-831 | Head Retention Bolt |
| FIL11090-800-842 | Lock Nut |
| FIL11100-FA-26 | B747 shear pin |
| FIL11130-4 | Bolt assy |
| FIL11130-5 | Bolt assy |
| FIL11130-10 | Bolt assy |
| FIL112108 | Handle assy |
| FIL112109 | Electrostatic Protection Test Bench |
| FIL112111 | Cargo door maintenance tools |
| FIL112202 | trundle |
| FIL11300 | Wheel assembly and disassembly bracket |
| FIL122105 | Lead Screw Collars |
| FIL122202 | B767 air duct |
| FIL132105 | Fuel tank sedimentation device |
| FIL132108 | Oil pipe repair knife |
| FIL132203 | Waterproof power distribution platform |
| FIL142203 | Auxiliary power unit working ladder |
| FIL152203 | airstairs |
| FIL162203 | Horizontal stabilizer compartment access ladder |
| FIL172203 | Cargo hatch lubrication work platform |
| FIL1800-01-004 | Assy comp |
| FIL1820-6-22 | Wheel |
| FIL1820-6-48 | Mount shock absorbing |
| FIL1821-6-106 | Shock absorber |
| FIL182203 | Landing gear compartment access ladder |
| FIL192203 | Engine inspection work platform |
| FIL2012-01 | Test pressure hose assy |
| FIL202203 | 1-meter universal working ladder |
| FIL2101-01 | Tank ventilation tool |
| FIL212203 | Cover plate storage platform |
| FIL222203 | Aircraft parts storage rack |
| FIL232203-P | Blocking head component |
| FIL232203-S | Blocking head component |
| FIL242203 | Adjustment of support |
| FIL252203 | S2009 test piece lifting device |
| FIL282203 | Disassembly tools |
| FIL302203 | Bubble simulation device |
| FIL312203 | Quenching furnace material frame |
| FIL320QMX | Tire deflator |
| FIL320TCS | A320 wheel changer |
| FIL332203 | welding fixture |
| FIL362203 | Top iron 1 |
| FIL372203 | Top iron 2 |
| FIL5060-10-001 | Base frame |
| FIL5060-10-002 | Inner scissor frame |
| FIL5060-10-003 | Outer scissor frame |
| FIL5060-10-004 | Top frame |
| FIL5060-10-005 | Tilt frame |
| FIL5060-10-006 | Support frame(imp) |
| FIL5060-10-007 | Top frame |
| FIL5060-10-008 | Tilt frame |
| FIL5060-10-009 | Link frame |
| FIL5060-10-047 | Pad |
| FIL5060-19-010 | Manouvering handle |
| FIL5060-19-011 | Tow bar link |
| FIL5060-19-012 | Wheel guard |
| FIL5060-19-064 | Bush |
| FIL5060-20-014 | Slide block |
| FIL5060-23-037 | Support bracket |
| FIL5060-23-044 | Cap |
| FIL5060-24-046 | Support bracket |
| FIL5060-27-053 | Brace hyd cyl |
| FIL5060-28-069 | Location frame (MLG door) |
| FIL5060-29-071 | Support bracket |
| FIL5060-31-073 | Cross member |
| FIL5060-31-079 | Cross member |
| FIL5060-32-085 | Stowage container |
| FIL5110-21-040 | V.T.P. stud |
| FIL5110-21-041 | Special washer |
| FIL5110-21-042 | V.T.P. pad |
| FIL5110-21-043 | Tube nut，fabrication |
| FIL5110-21-044 | Washer |
| FIL5110-21-045 | Retainer |
| FIL5110-21-047 | Rudder pad |
| FIL5110-21-121 | Tommy bar |
| FIL5110-25-076 | Stop block |
| FIL5110-25-077 | Nut block |
| FIL5110-25-084 | Pin，pivot |
| FIL5110-25-085 | Retainer |
| FIL5110-25-086 | Bullet dowel |
| FIL5110-25-087 | Tie rod upper，fabrication |
| FIL5110-25-088 | Tie rod lower，fabrication |
| FIL5110-25-089 | Pin，tie rod |
| FIL5110-25-090 | Bush 16×20×16 plain |
| FIL5110-27-099 | Hook |
| FIL5110-27-101 | Adjuster bracket 'Y' fabrication |
| FIL5110-27-102 | Adjuster screw 'Y' |
| FIL5110-27-105 | Bobbin pin，beam |
| FIL5110-27-106 | Bobbin pin，beam |
| FIL5110-27-135 | Collar |
| FIL5190 | Locking Tool Flap Control Lever |
| FIL5211 | L/G Selector Locking |
| FIL5220 | Pin Side Stick Locking |
| FIL5230 | Safety locking Device MLG doors |
| FIL5290 | Lateral links extractor set |
| FIL5320-02-001 | CWB platform |
| FIL5320-02-002 | Support channel |
| FIL5320-02-003 | Pad |
| FIL5510 | A380 jack pad installation adapter |
| FIL565BS | Brace-hold open cowls |
| FIL565BS-17 | Pin assy |
| FIL565BS-27 | Pin assy |
| FIL565BS-28 | Pin assy |
| FIL565BS-A-16 | U-type connector |
| FIL565BS-B-16 | Long hook |
| FIL565BS-B-17 | Short hook |
| FIL70199 | F70199-1G Elbow-type connector |
| FIL737QMX | B737 tire deflation tool |
| FIL8100-04-001 | Base frame |
| FIL8100-06-002 | Z lift frame |
| FIL8100-07-003 | Y axis frame |
| FIL8100-08-004 | Slewing frame |
| FIL8100-09-005 | X axis frame |
| FIL8100-10-006 | Pivot and mounting frame |
| FIL8100-1055 | Grease nipple-1/4' |
| FIL8100-11-600 | Axle stand |
| FIL8100-11-616 | Axle Stands |
| FIL8100-11-601 | Axle stand |
| FIL8100-11-602 | Axle stand |
| FIL8100-11-603 | Axle stand |
| FIL8100-1-260 | Nut |
| FIL8100-13-21 | Locking pin |
| FIL8100-13-22 | Locking pin |
| FIL8100-13-29 | Bearing retainer |
| FIL8100-13-359 | Location pin |
| FIL8100-14 | Axle sleeves assy |
| FIL8100-43 | Axle sleeves assy |
| FIL8100-44 | Axle sleeves assy |
| FIL8100-45 | Axle sleeves assy |
| FIL8100-617 | Axle sleeves assy |
| FIL8100-618 | Axle sleeves assy |
| FIL8100-14-43A | Inner axle protection shell |
| FIL8100-14-43C | Inner Axle Protection Shell (CLG) |
| FIL8100-14-45A | Duter protection shell |
| FIL8100-14-617 | Axle shell spring large |
| FIL8100-14-618 | Axle shell spring small |
| FIL8100-15 | TOOL |
| FIL8100-15-46 | Screw |
| FIL8100-15-47 | Stop |
| FIL8100-15-48 | Shaft |
| FIL8100-15-49 | Washer |
| FIL8100-15-50 | Pivot block |
| FIL8100-15-50a | Oilite bush |
| FIL8100-15-51 | Pivot block |
| FIL8100-15-52 | Extractable dowel |
| FIL8100-15-53 | Dowel pin |
| FIL8100-15-54 | Oilite bush |
| FIL8100-15-55 | Rectangular key |
| FIL8100-15-56 | Handwheel |
| FIL8100-16-77 | Screw |
| FIL8100-16-78 | Axis |
| FIL8100-16-84 | Plain washer |
| FIL8100-16-85 | Lock nut |
| FIL8100-16-97 | Shaft y axis |
| FIL8100-17-101 | Handweel |
| FIL8100-17-102 | Bushing |
| FIL8100-18-127 | Drive shaft |
| FIL8100-18-135 | Collar |
| FIL8100-18-137 | Slew Drive Shaft |
| FIL8100-19-146 | Lift bracket |
| FIL8100-19-147 | Lift screw support tube |
| FIL8100-19-148 | Lift screw support tube |
| FIL8100-19-150 | Support washer |
| FIL8100-19-154 | Screw |
| FIL8100-19-155 | Bolt |
| FIL8100-19-156A | Switch M0Unting Plate |
| FIL8100-19-156B | Actuator |
| FIL8100-19-156D | Spring |
| FIL8100-19-163A | Protective Body (Manual Jacking) |
| FIL8100-19-163B | Protective Body (Manual Jacking) |
| FIL8100-19-164A | Protective Cover (Manual Jacking) |
| FIL8100-19-164B | Protective Cover (Manual Jacking) |
| FIL8100-19-165 | Limit Switch Trip Plate |
| FIL8100-20 | TOOL |
| FIL8100-20-166 | Wheel fork |
| FIL8100-20-168 | Wheel shaft |
| FIL8100-20-170 | Wheel collar |
| FIL8100-20-170A | Wheel spacer |
| FIL8100-20-171 | Lock washeer |
| FIL8100-20-172 | Lock nut |
| FIL8100-20-173 | Tape roller brg |
| FIL8100-20-174 | Tape roller brg |
| FIL8100-20-177 | Split pin |
| FIL8100-20-178 | Caster assy |
| FIL8100-20-178B | Taper bearing |
| FIL8100-20-179 | Brake handwheel |
| FIL8100-20-180 | Brake retaining bush |
| FIL8100-20-181 | Brake pad |
| FIL8100-20-182 | Nylon dust cover |
| FIL8100-20-183 | Nylon dust cover |
| FIL8100-20-184 | Location pin |
| FIL8100-23 | TOOL |
| FIL8100-23-199A | Microswitch M0Unting Plate |
| FIL8100-23-199B | Stabiliser Microswitch Guard |
| FIL8100-23-199C | Stabiliser Microswitch Guard |
| FIL8100-23-205 | Jack arm |
| FIL8100-23-206 | Jack arm |
| FIL8100-23-208 | Jack pad |
| FIL8100-23-209 | Jack pad retainer |
| FIL8100-23-210 | Screw assembly |
| FIL8100-23-210A | Pivot pin bush |
| FIL8100-23-210B | bushes |
| FIL8100-23-210C | bushes |
| FIL8100-23-213 | Locking pin |
| FIL8100-23-215 | Handwheel modification |
| FIL8100-23-222 | Hand wheel/Roll pin |
| FIL8100-23-218 | M6x20 Soc csk screw Z/Plate |
| FIL8100-23-221 | Roll pin |
| FIL8100-23-225 | Screw |
| FIL8100-24 | TOOL |
| FIL8100-24-228 | Pivot pin |
| FIL8100-24-229 | M24 Plain washer |
| FIL8100-24-230 | φ5×40 Split pin |
| FIL8100-24-235 | Towbar Locking Pin |
| FIL8100-24-238 | Connect fork |
| FIL8100-25-243 | Z' Frame Upper Limit Switch M0Unt Bracket |
| FIL8100-25-245 | Z' Frame Upper Limit Switch M0Unt Bracket |
| FIL8100-25-246 | Brake handle wheel |
| FIL8100-25-247 | Brake retainer |
| FIL8100-25-248 | Stop Bar |
| FIL8100-25-619 | Guard Body |
| FIL8100-28-342 | Steering arm fab |
| FIL8100-29-348 | Screw |
| FIL8100-29-349 | Bush |
| FIL8100-29-410 | bearing retainer |
| FIL8100-30 | Safety Edge Assy |
| FIL8100-31 | Safety Edge Assy |
| FIL8100-30A-06 | Lable |
| FIL8100-30-SET | Complete set of Labels |
| FIL8100-3100.0110N | Safety rubber strip |
| FIL8100-32-389 | Stdwage locking pin |
| FIL8100-37-475 | Pin |
| FIL8100-37-478 | Pin |
| FIL8100-40-700 | Labels for tool storage box |
| FIL8100-40-701 | Labels for tool storage box |
| FIL8100-41-800 | Trolley main cover frame |
| FIL8100-42-801 | Cover |
| FIL8100-A/P | Plug |
| FIL8100-A/S | Socket |
| FIL8210A-02-37 | Post |
| FIL8210A-02-38 | Nylon Disk |
| FIL8210A-034 | Ring |
| FIL8210A-06-14 | Stabiliser stow nest |
| FIL8210A-08-018 | Axle clamp upper |
| FIL8210A-08-019 | Axle clamp lower |
| FIL8210A-08-020 | Axle clamp pivot link |
| FIL8210A-08-021 | Ball handle |
| FIL8210A-08-022 | Axle clamp pivot |
| FIL8210A-08-023 | Axle nut |
| FIL8210A-100 | Brake fender assembly |
| FIL8210A-10-31 | Axle Nut Storage |
| FIL8210A-10-32 | Clamp Disc |
| FIL8210A-110 | Pip Pin |
| FIL8210A-11-34 | Facing Collar |
| FIL8210A-115 | Lock nut |
| FIL8210A-33 | Fixture assy |
| FIL8210A-34 | Fixture assy |
| FIL8210A-35 | Fixture assy |
| FIL8210A-141 | Fixture assy |
| FIL8210A-146 | Fixture assy |
| FIL8210A-147 | Fixture assy |
| FIL8210A-149 | Fixture assy |
| FIL8210A-150 | Fixture assy |
| FIL8310-07-007 | Sleeve |
| FIL8310-07-008 | Sleeve |
| FIL8310-07-012 | Garter spring assy |
| FIL8310-07-013 | Screw cap |
| FIL8310-08-015 | Stop |
| FIL8310-100 | Swivel castor |
| FIL8310-101 | Fixed castor |
| FIL8400-1028 | Coupling + Slider + Knob |
| FIL8400-1059 | Coupling + Slider + Knob |
| FIL8400-46-096 | Stabilising leg |
| FIL8400A-1002 | Motor lead screw and bearing assembly |
| FIL8400A-1012 | Belt BT/590 |
| FIL8400A-1059 | Linear guide rail bearing |
| FIL8400A-1075 | Wheel assy |
| FIL8400A-503-255-428-2 | Ball screw 25 x 5 x 428 long |
| FIL8400A-51-158 | Screw cap |
| FIL8400A-51-2 | Spring |
| FIL8400A-56/137 + 1076 | Caster |
| FIL8400A-56-137 | Drive wheel hub |
| FIL8400A-76-250 | Frame assy |
| FIL8400A-76-250C | Cover |
| FIL8400B | Liner guide for bearing |
| FIL8700-08-006 | Attachment plate |
| FIL8700-08-007 | Attachment plate |
| FIL8700-101 | Gearbox + shaft |
| FIL8700-81 | Gearbox assy |
| FIL8700-182 | Cap screw |
| FIL8700-22-076 | Bullet dowel |
| FIL8700-22-216 | Location pin |
| FIL8700-22-217 | Location pin nut |
| FIL8700-23-81 | Gearbox shaft |
| FIL8700-2-81 | Gearbox shaft |
| FIL8700-29-220 | Sliding location block |
| FIL8700-29-221 | Sliding location block |
| FIL8700-29-227 | Key |
| FIL8700-500 | Bradley |
| FIL8700-502 | Revvo |
| FIL8700-64 | Extension tube |
| FIL8700-69 | 'A' frame |
| FIL8700-70 | 'A' frame |
| FIL8700-95 | Frame clamp |
| FIL8730 | Protection cover |
| FILBHT33190 | protection cover |
| FILCSC | Cargo storage cabinet |
| FILFTB80B | Hand pump-opening system，thrust reverser |
| FILIDGT | Hoist accessory-IDG rem/inst for CFM56-5 |
| FILJYT-2P | 2 gallon fluid dispenser |
| FILJYT-5YG | Hose assy |
| FILJYT-7011 | Fuel gun |
| FILLTCE-L | A320 Tire pressure gage |
| FILLTCE-S | B737 Tire pressure gage |
| FILLTCY-L | A320 Tire pressure gage |
| FILLTCY-S | B737 Tire pressure gage |
| FILLTT | Leakage testing tool |
| FILTBML-610 | Handle + Pin |
| FILZHYS-767 | Integrated transport vehicle |
| Fixture 01 | Flexible clamping fixture 01 |
| Fixture 02 | MRO-flexible clamping fixture 02 |
| FORM-RS-232 | Refacing tooling |
| FR-150612-04 | Techinical Screw |
| FTYZX-A330 | pin |
| FY19-QJD-100-1 | lifting lug |
| FY19-QJD-100-10 | Ring 3 |
| FY19-QJD-100-11 | Ring 4 |
| FY19-QJD-100-2 | Pin |
| FY19-QJD-100-3 | upper plate |
| FY19-QJD-100-4 | Sensor base |
| FY19-QJD-100-4A | Sensor base-60T |
| FY19-QJD-100-4B | supporting part |
| FY19-QJD-100-5 | Connection plate |
| FY19-QJD-100-6 | Connecting rod |
| FY19-QJD-100-7 | Connecting parts |
| FY19-QJD-100-8 | Ring 1 |
| FY19-QJD-100-9 | Ring 2 |
| G0031-0119-1 | Coupling |
| G-209-5/8 | Shackle |
| G-2130-1/2 | Shackle |
| G2535LM | Gauge |
| G403-D10 | Swivel |
| G601R071001−1 | Pad assy，jacking |
| G601R200003-3 | Kit indicators & holder |
| G601R270005−1 | Plate-aileron and elevator backlash check |
| G601R271002−1 | Spacer-aileron cable tension regulator rigging |
| G601R274101−1 | Kit-weight and support strap |
| G601R274101-13 | Slotted weight interlocking |
| G601R274101-15 | Slotted weight interlocking |
| G601R274101-5 | Strap assembly |
| G601R274101-7 | Cable assembly（short） |
| G601R274101-9 | Cable assembly（long） |
| G601R274202−1 | Safety tool-horizontal stabilizer |
| G601R274205−1 | Tool-hor,stab,trim actuator bellows anti-twist |
| G601R276202−27 | Kit-PCU safety tools |
| G601R321005-1 | Extractor MLG pintle pin |
| G601R321006-1 | Dolly-MLG &NLG removal/installation |
| G601R324101-1 | Wrench MLG axle nut |
| G601R324304−1 | Tool-rotor centering |
| G601R521104-1 | Adaptor-cabin door torque |
| G601R710008−1 | Pin-engine installation |
| G601R710009−1 | Protector-fwd engine mount |
| G601R710010−1 | Protector-plylon aft mount |
| G601R783202-1 | Kit-thrust reverser rigging tool |
| G-C-M-AC-0786 | Aid-NLG R/I |
| GE9XTCFM007 | Fixture,guide |
| GE9XTCFM008 | Fixture hold |
| GE9XTCFM009 | Fixture,lift |
| GE9XTCFM010 | Fixture hold |
| GE9XTCFM015 | Fixture LIFT |
| GE9XTCFM026 | Fixture,Press |
| GE9XTCFM033 | Fixture,assembly |
| GE9XTCFM035 | Fixture assembly |
| GE9XTCFM039 | Lever clamping |
| GE9XTCFM041 | Nut |
| GE9XTCFM042 | Fixture pull |
| G-O-M-AC-0810-SD | 777 bracket alignment and torque tool |
| G-O-M-AC-0841-SD | 90○ nipple |
| G-O-M-AC-1033-SD | Fueling joint |
| G-O-M-AC-1045 | Axle screw protective cover |
| G-O-M-AC-1058-SD | Hydraulic vehicle adapter |
| G-O-M-AC-1058-SD Upgrading of | Hydraulic vehicle adapter |
| G-O-M-AC-1168-SD | Screw sleeve installation tool |
| G-O-M-AC-1202-SD | Anti-slip foot pad |
| G-O-M-SB-1063-SD | Bolt torque adapter |
| G-O-M-SM-1100-SD | A330 landing gear bearing test tool |
| G-O-M-SM-1167-SD | C39.2 seat rail auxiliary positioning pin |
| GRE-15-00-B9176-101-A | Special tool anvil |
| GRE-15-00-B9176-102-A | Special tool anvil |
| GRE-15-00-B9176-103-A | Special tool anvil |
| GRE-15-00-B9176-104-A | Special tool anvil |
| GSE55935-211 | Housing assy |
| GSE55935-212 | Housing assy |
| GSE55935-213 | Housing assy |
| GSE55935-214 | Housing assy |
| GSE55935-215 | Housing assy |
| GSE56069-104 | Detail |
| GU28883-1 | Assembly tool |
| GU440F-A0004N | Pins for Profile 440F-E0110N10 |
| GU440F-A0071N | 90 Deg Corner Connector 0110N Profile |
| GU440F-A1302N | Closing Gap 0110N Profile |
| GU440F-A1305 | Cable & connector 5 metres |
| GU440F-A1308 | 6K Yellow Resistor |
| GU440F-E0110N10 | Safe edge 0110N Profile (10 metres) |
| GU440F-R1215 | 2m Alum Horiz Lip C112/A3 Rail |
| HA-40997/44142-01 | Imported transfer fitting |
| HA-40997/44142-03 | fixed support |
| HA-40997/44142-04 | fixed support |
| HA-44018SERIES-02 | Exit transfer pipe |
| HC21740-1 | Torque check plug-ø.250 UNF |
| HC21743 | Standard |
| HC25619-1-B | Impact extractor body |
| HC55713-C | Handling cart |
| HC55761-B | Handling cart |
| HC55850-NC | Handling cart assy |
| HCU103 | Standard equipment |
| HCU163 | Clamp |
| HIX1001-05# | Yoke |
| HIX1001-05/N | Pin |
| HIX1001-05/T | Bolt assembly |
| HIX1001-06# | Lifting component |
| HIX1001-07# | Strap |
| HIX1001-19# | Shackle |
| HIX4001-4 | Hose assy |
| HJ1-55-5 | Clamping rod |
| HNAS12312-200SO | General-purpose work ladder for aircraft maintenance - 2 meters |
| HP13681 | Adaptor balance |
| HP17598 | Swage nut |
| HP17599 | Initial fit tool |
| HP17600 | Swage piece |
| HP17601 | Pulling in block |
| HP17602 | Extraction tool |
| HRC01772 | Machining fixture |
| HRC01830 | Lifting tool |
| HRC03694 | Adaptor ring |
| HRC03780 | machining fixture hp/ip bearing support outer case assembly |
| HU12676-2 | Op on repair |
| HU17584-2 | Pin,location |
| HU17594-1 | Tool |
| HU17595-1 | Tool |
| HU18034-1 | Pin location |
| HU18070-1 | Pin |
| HU18072-1 | Extractor |
| HU18469-1 | Pin,location |
| HU19008-6 | Spring Assy Support Lp Comp Front Bearing |
| HU19074-1 | Adaptor Support |
| HU19272-7 | Centralizing fixture |
| HU19327-4 | Balancing arbor |
| HU19382-6 | Blading fixture |
| HU19612-3 | Extractor,Taper Bolts |
| HU19646-1 | Peening Tool |
| HU19648-1 | Peening Tool |
| HU20245-1 | Base |
| HU20340-1 | Clocking pin |
| HU20495-1 | Reacting plate |
| HU20566-1 | Clocking arm |
| HU20743-4 | HP comp rotor and stator assy |
| HU21191-1 | Spanner |
| HU21549-2 | Extractor |
| HU22701-1 | Fitters |
| HU23054-1 | Location block |
| HU24532-1-2 | Adapter plate |
| HU25085-4 | Bearing(rear) |
| HU25150-1 | plate |
| HU25518-2 | Turnover stand |
| HU25814-1 | Extractor body |
| HU25919-1 | Sphercial end punch |
| HU26091-4 | Ring |
| HU26355-3 | Immobiliser |
| HU26743-3 | Pivot block |
| HU26744-1 | Adaptor |
| HU26928-1 | Dowel extractor |
| HU28187-3 | Round up ring |
| HU28470-1 | Handle |
| HU28540-1 | Fixture,fixture |
| HU28651-1 | Hexagon head bolt |
| HU28728-3 | Adaptor |
| HU28795-1 | Protection strap |
| HU29147-1 | Drift handle |
| HU29240-1 | Washer,tooling |
| HU29255-4 | Rod |
| HU30352-1 | Pad position gauge |
| HU30353-1 | Comb |
| HU30619-1 | Fit Lock plates |
| HU31047-3 | Spanner |
| HU31096-1 | Adaptor Balance |
| HU31282-1 | Rigging pin |
| HU31492-1 | Adaptor T/O |
| HU31900-1 | Dogging bar |
| HU32128-1 | Immobiliser |
| HU32129 | Spanner |
| HU33538-1 | Packing piece |
| HU3356-1 | Stop |
| HU33740-2 | Extractor |
| HU34068-1 | Stand |
| HU34304-2 | Build stand |
| HU34332-2 | Pressing tool |
| HU34843-1 | Stand hp ip brg support |
| HU35119-3 | Turn over stand |
| HU35120-2 | Lifter |
| HU35120-3 | Lifter |
| HU35155-1 | Gauge setting |
| HU35264-1 | Lifter |
| HU35471-2 | Lifter |
| HU35539-1 | Lifting beam |
| HU35540-1 | Lifting beam |
| HU35633-1 | Extractor |
| HU35649-1 | Rear end lifter |
| HU35764-2 | Build stand |
| HU35766-2 | Rear end support tool |
| HU35768-5 | Stand safety |
| HU35788-1 | Parallel slave bolt |
| HU35806-4 | Lifting beam |
| HU36013-1 | Drift |
| HU36016-1 | Drift liner fitment |
| HU36029-5 | Assembly tool |
| HU36055 | Assembly tool |
| HU36056 | Press pot |
| HU36542-1 | Trolley |
| HU36781-1 | Transportation trolley |
| HU36993-1 | Lifting Tool |
| HU37005-1 | Impact extractor adaptor |
| HU37024-1 | Lifter |
| HU37044-3 | Lifter |
| HU37047-1 | Lifter |
| HU37049-1 | Lifter |
| HU37055-1 | Lifter |
| HU37056-2 | Balance arbor |
| HU37065-4 | Immobiliser |
| HU37081-1 | Turnover adaptor plc |
| HU37098-1 | Extractor |
| HU37099-2 | Sling |
| HU37259-1 | Assembly tool |
| HU37292-5 | Immobiliser |
| HU37321-2 | Parking stand |
| HU37322-1 | Parking stand |
| HU37424-5 | Build/transportation trolley |
| HU37427-1 | Build stand |
| HU37437-1 | Setting Block |
| HU37442-3 | Build stand |
| HU37455-2 | Lifter |
| HU37479-1 | Extractor |
| HU37530-1 | Anvil |
| HU37531-1 | Anvil |
| HU37532-1 | Anvil |
| HU37533-1 | Anvil |
| HU37548-2 | Rear support bracket |
| HU37550-1 | Front support bracket |
| HU37552-1 | Lifter |
| HU37553-2 | Lifting tool |
| HU37586-1 | Plate，mounting，clock |
| HU37602-1 | Anchor lpc mod parking stan |
| HU37612-2 | Parking stand |
| HU37628-1 | Location pin kit |
| HU37710-1 | Support adaptor |
| HU37734-4 | Extraction tool |
| HU37755-1 | Sling |
| HU37844-1 | Swaging Tool |
| HU37869-1 | Reamer,taper |
| HU37871-1 | Reamer,taper |
| HU37891-2 | Lifter |
| HU37975-3 | Turning fixture |
| HU37996-1 | Extractor |
| HU38028-1 | Punch |
| HU38080-1 | Immobiliser |
| HU38081-1 | Location ring |
| HU38141-3 | Stand park transport mod |
| HU38210 | Balancing fixture |
| HU38434-1 | Protrusion Gauge |
| HU38468-1 | Immobiliser/lifter |
| HU38519-4 | Immobiliser |
| HU38625-1 | Container |
| HU38633-3 | Stand build |
| HU38685-1 | Immobiliser |
| HU38686-1 | Adapter |
| HU39099-1 | Extension sockets |
| HU39180-3 | Dummy stub shaft |
| HU39731-2 | Balance drive shaft adaptor |
| HU39840-2 | Hydraulic adaptor |
| HU40088-1 | Stand,transport |
| HU40190-1 | Lifter |
| HU40191-2 | Lifter |
| HU40193-1 | Lifter |
| HU40403-3 | Adaptor |
| HU40453-2 | Stand build |
| HU40612-2 | Lifter |
| HU40641-1 | Lift tool |
| HU40654-1 | Stand，build |
| HU40672-2 | Bush plate |
| HU40950-1 | Clamping tool |
| HU41001-1 | Plate,bush |
| HU41205-4 | Build stand |
| HU41434-2 | Location sleeve |
| HU41468-1 | Stand,parking |
| HU41600-1 | Hydraulic cylinder assy |
| HU41660-3 | Extractor assembly |
| HU41786-1 | Stand,support |
| HU41787-2 | Stand,support |
| HU41957-1 | Machining fixture |
| HU42042-1 | Retaining tool |
| HU42171-1 | Rigging bracket |
| HU42172-1 | Rigging bracket |
| HU42373-1 | Match |
| HU42757-1 | Socket special |
| HU42771-3 | Loc pin |
| HU42840-3 | Inspection fixture |
| HU42852-3 | Turnover and lifting tool |
| HU42947-1 | Rigging nut |
| HU43028-1 | Lifter |
| HU43367-1 | Feeler gauge |
| HU43379-1 | Alignment tool |
| HU43443-1 | Pin setting |
| HU43455-1 | Nut |
| HU43462-3 | Lifter |
| HU43480-1 | Turnover adaptor |
| HU43973-1 | Stand,turn-over |
| HU43988-2 | Trolley |
| HU44048-5 | Lift tool |
| HU44114-1 | Extractor |
| HU44134-2 | Prybar |
| HU44185-1 | Setting gauge |
| HU44366-1 | Lifter |
| HU44482-4 | Dummy ring,anti-score |
| HU44751-1 | I.D.G blanking plate |
| HU44753-1 | Starter unit blanking plate |
| HU44883-1 | Immobiliser |
| HU45110-1 | Drive Plate |
| HU45150-1 | Retaining plate filing fixture |
| HU45379-1 | Lift tool |
| HU50019-2 | Stand build lpt rotor to c |
| HU50028-1 | Balance fixture front |
| HU50047-2 | Vertical&Horizontal Lifter |
| HU50067-1 | Rigging pin |
| HU50282-1 | Immobiliser |
| HU50288-1 | Setting gauge |
| HU50323-1 | Assembly tool |
| HU50377-3 | Lifter |
| HU50391-2 | Anvil |
| HU50397-3 | Lifter |
| HU50422-1 | Adaptor ring front |
| HU50423-1 | Adaptor ring rear |
| HU50424-2 | Anvil |
| HU50642-1 | Lifting clamp |
| HU51193-1 | Front support |
| HU51194-1 | Front support |
| HU51255-2 | Extractor |
| HU51505-1 | File fixture |
| HU51993-2 | Support tool |
| HU52012-1 | Extraction tool |
| HU52027-1 | Torque spanner |
| HU55007-1 | Handling adaptor |
| HU55061-5 | Stand engine build |
| HU55108-15 | Handling mount assy |
| HU55108-16 | Handling mount assy |
| HU55108-17 | Handling mount assy |
| HU55108-22 | Handling mount assy |
| HU55108-5-9 | Adjustable spigot |
| HU55108-8-SP | installation block |
| HU55131-1 | Transportation support 08 turbine module |
| HU55133-2 | Transportation Support 05 Turbine Module |
| HU55151-1-3 | Bolt Hex Head Special |
| HU55231-12 | Stud assy |
| HU55231-13 | Stud assy |
| HU55231-27 | Stud assy |
| HU55231-29 | Stud assy |
| HU55325-2 | Bar tow |
| HU55368-3-74 | Strut end R-H |
| HU55368-3-75 | Strut end L-H |
| HU55868-27 | Hex hd bolt |
| HU55868-3-9 | Hex hd bolt |
| HU56196-2 | Sling engine,turn over front |
| HU56197-3 | Engine Build Stand |
| HU56416-1 | Engine build fan case front support |
| HU56435-2 | Trolley,sling fan assembly |
| HU56447-1 | Stand,gearbox dressing |
| HU56468-1 | Trolley engine sling |
| HU56483-2 | Trolley |
| HU80464-1 | Location block |
| HU81330 | Assembly tool |
| HU81332-2 | Extraction tool |
| HU82264 | Protector bung |
| HU82265 | Seal clamp tool |
| HU84117-1 | Extractor |
| HU85023-1 | Tool description pusher bevel gear 26T-or 531 egd |
| HU85237-1 | Drift,Oil Metering Insert External Gearbox Case |
| HU87133-1 | Starp assy |
| HU87133-13 | Stud |
| HU87133-2 | Starp assy |
| HU87133-3 | Strap |
| IAE1N20013-4 | Strap assy（L=64.24'） |
| IAE1N20013-5 | Strap assy（L=69'） |
| IAE1N20013-6 | Strap assy（L=111'） |
| IAE1N20014-5 | Lifting bolt |
| IAE1N20014-6 | TOOL |
| IAE1N20403-1 | Sling inlet cowl |
| IAE1N20403-11 | Assembly |
| IS04-71-101 | Tension block |
| ISO10642 | Screw |
| ISO4762 | Screw |
| ISO8675 | Hex nut |
| J77480 | Basic unit assembly feame |
| J77756 | foot |
| KPC3-640-35 | Pitot cover |
| KPC3-825-65 | Pitot cover |
| KTQLD-T | Wide-body aircraft main wheel chocks |
| LAG-2327B | Machine（tie）bolt retainer driver |
| LAG-2557C | Piston od packing sizing tool |
| LAG-2558C | Bushing od packing sizing tool |
| LAG-2839B | Piston od packing sizing tool |
| LAG-3197B | Brake assembly spacer |
| LL2-H-8M(S) | Pump connector |
| LMV-001-500-1 | Adaptation stockage tbp axevertical |
| LMV-001-600-1 | Couronne stockage tbp compatible pampes a douche |
| Lorprene 06 | Lorprene hose |
| M15570-22-1 | Removal Tool |
| M20 | Washer Form 'A' |
| M22520/1-01 | Crimping tool |
| M22520/1-02 | Crimping tool |
| M22520/1-05 | Crimping tool |
| M22520/2-01 | Crimping tool |
| M22520/2-02 | Crimping tool |
| M22520/2-06 | Crimping tool |
| M22520/2-07 | Crimping tool |
| M22520/2-08 | Crimping tool |
| M22520/2-09 | Crimping tool |
| M22520/2-11 | Crimping tool |
| M22520/2-23 | Crimping tool |
| M22520/3-1 | Crimping tool |
| M22520/3-10 | Crimping tool |
| M22520/37-01 | Crimping tool |
| M22520/3-9 | Crimping tool |
| M22520/39-01 | Crimping tool |
| M22520/5-09 | Crimping tool |
| M22520/5-100 | Crimping tool |
| M22520/5-11 | Crimping tool |
| M22520/5-47 | Crimping tool |
| M22520/7-01 | Crimping tool |
| M24 | Washer Form 'A' |
| M28TC0021000 | Pole Water Drain main assy |
| M47387-100 | Materiels de servitude |
| M57571602000 | Hev vane in |
| M57572602000 | Hev vane in |
| M57T50161000 | Guide cone |
| M57T50172000 | Support Spoiler 1 collar assy |
| M57T50252000 | Strut spoiler 1&2 |
| M57T50327000 | Pylon pin socket assy |
| M57T50496000 | Strut spoiler 3,4&5 |
| M57T50511000 | Aar pod vakve R-I |
| M57T50730000 | Spoiler 3,4&5 actuator Collar |
| M622U3002801 | Title conical instalation tool |
| M623U1002102-050 | Bolt |
| M623U1002102-052 | Castle nut |
| M623U1002204 | Joint |
| M632U1005121 | Title adjustable base |
| M632V1003102 | Title accessory module sling |
| M632V1003221 | Title clevis |
| M632V1005102 | Title MGB support |
| M632V1005224 | Title forklift run |
| M632V3016102 | Title compressor pulley seal exchange |
| M632V3019221 | Title shim |
| M632V6023101 | Title MGB aerotransport blank |
| M641V1000121 | Title trb support |
| M81969/14-07 | Removal Tool |
| M81969/14-08 | Removal Tool |
| M81969/14-09 | Removal Tool |
| MAA60200S | Battery apply fixture |
| MB1225DU | Bush |
| MB596269S | Go/No-go gage |
| MB596270S | Go/No-go gage |
| MH12731 | Adaptor |
| MH14187 | Pressure blank |
| MH14188 | Pressure blank |
| MH16190-1 | Case,lp compressor,front assy |
| MH16442-1 | Pressure plate |
| MN6216 | flange plate |
| MN6217 | Adaptor |
| Model 350 | 5 gallon fluid dispenser |
| 9C2295G04 | Dummy stator |
| 9C2295G05 | TOOL |
| MRD98765 | Lifting pin |
| MS03-70-133+MS03-70-171 | Drive pulley+Take-up pulley |
| MS03-70-151 | End pulley |
| MS03-70-151+MS03-70-171 | End pulley+Take-up pulley |
| MS03-70-183 | Return roller |
| MS03-70-184 | Return roller |
| MS17984C1645 | Ball lock pin |
| MS17984C550 | Ball lock pin |
| MS17985C1216 | Pin,quick release |
| MS17987C410 | Pin-quick release |
| MS17989-522 | Ball Lock Pins |
| N14000025A | Circlip |
| NAS623-4-15 | Screw |
| NAS6609-54 | Bolt |
| NCS67040-5 | Lock pin |
| NCS67040-6 | Lock pin |
| NCU11566-12 | Sling |
| NCU11636-3 | Adaptor |
| NCU11678-A | Universal stand |
| NCU11934-7F | Universal slinging adaptor |
| NCU12512-A | Stand Build Stand |
| NCU12530 | Adaptor |
| NCU12565 | Lifting beam |
| NCU12614-1 | Lifting sling |
| NFE25-125 | Screw chc |
| NFE27-160 | Screw fhc |
| NFE27161 | Screw chc M8x10 |
| NFE27311 | Screw |
| NFE27411 | Nut h-M6 |
| NFE27-414 | Nut slot |
| NFE27454 | Wing nut M16 |
| NFE27611 | Washer M10U |
| NLM6209-5 | Trunnion nut |
| NLM643-161-70 | Indexing lever |
| NLM724-060 | Nut |
| NSA55131-114 | SNAP-CLOSURE(PART OF TOOL 98A27508060000) |
| NSA55144-101 | Washer |
| NSA9006-C12B | Lug lifting |
| NST020 | Adapter for aicon |
| NST020-208 | Adapter for aicon |
| NST044 | Welding table |
| NST056 | Weldment clamp |
| NST092 | ATP tooling |
| NST131 | Spray ptfe |
| NST131-04 | Spray ptfe |
| NST131-06 | Spray ptfe |
| NST131-08 | Spray ptfe |
| NST131-10 | Spray ptfe |
| NST131-12 | Spray ptfe |
| NST131-16 | Spray ptfe |
| NST131-20 | Spray ptfe |
| NST133-16 | Protection |
| NST133-20 | Protection |
| NST133-4 | Protection |
| NST133-6 | Protection |
| NST179 | Base plate |
| NST181-08 | Adapter for aicon |
| NST181-12 | Adapter for aicon |
| NST181-16 | Adapter for aicon |
| NT3/8-30MM-SS | Ball lock pin |
| NT3/8-55MM-SS | Ball lock pin |
| NTM10-50-SS | Ball lock pin |
| NTM10-60-SS | Ball lock pin |
| NTM10-70-SS | Ball lock pin |
| NTM8-50-SS | Ball lock pin |
| PCT10-3 | B787 RR T1000 engine cover |
| PF51-003-1-20 | Drum Shaft |
| Pos.60 | Plate |
| Pos.61 | Plate |
| PR10172586 | Damper driving device |
| PWC37760/D | Top Connecting Plate-D |
| Q46880 | Bush |
| QHYXZX210401 | dumper |
| R46780 | EXTRACTEUR |
| R532H1427-000W8200-01A00 | Guide rail storage vehicle |
| R7/16E | Socket 7/16 12 points modified |
| RC14026G01 | Stand，shipping changeout-engine GE9X |
| RC14026G02 | Stand，shipping changeout-engine GE9X |
| RC14026P36 | Caster lever arm |
| RC14031G01 | Engine,dummy assembly GE9X |
| RC14031P02A | Tube |
| RC14031P02B | Plate |
| RC14031P02C | Tube |
| RC14031P02D | Tube |
| RC14031P02E | Tube |
| RC14031P02F | Tube |
| RC14031P02L | Plate |
| RC14031P03A | Tube |
| RC14031P03B | Tube |
| RC14031P03C | Tube |
| RC14031P03D | Tube |
| RC14031P03E | Tube |
| RC14031P03F | Tube |
| RC14031P03L | Tube |
| RC14031P03M | Tube |
| RC14031P03N | Tube |
| RC14031P03P | Tube |
| RC14031P04A | Tube |
| RC14031P14B | Plate |
| RC14031P15A | Plate |
| RC14031P17B | Tube |
| RC14031P18B | Plate |
| RC14031P19A | Plate |
| RC14034G01 | Hydraulic control system for ge9x RC14026 Shipping stand |
| RC14086G01 | Fixture load test interface check genx-1b shipping stand |
| RC14105 | Load test/interface checking procedute-11C5010G01 |
| RC15002G01 | Engine,dummy weight,cg&dimension simulator trent 7000 |
| RC2500G02 | Manual drive pad adapter |
| RC2500G03 | Manual drive pad adapter |
| RC2510G01 | Futuredrive adapter BR715 |
| RC2600G02 | Manual drive pad adapter |
| RC2600G03 | Manual drive pad adapter |
| RC2620G01 | Manual drive pad adapter |
| RC2920G01 | Trent 1000&7000 hp adapter assy |
| RC2921G01 | Trent 1000ip adapter assy |
| RC2925G01 | Trent 900hp adapter assy |
| RC2926G01 | Trent xwb hp adapter assy |
| RC2927G01 | Trent 500,700,800 hp assembly adapter |
| RC2960G02 | G02 Assembly rotator adaptor |
| RF1638 | Trent 900 trolley modification |
| RNC7913-10 | Puller tool |
| RR-GENERIC | Lift/turnover tool |
| RRT026057-2 | Lif tool |
| RRT026070-2 | Support build stand |
| RRT026391-5 | Lift Tool |
| RRT026411-1 | Bearing housing |
| RRT026549-1 | Lift tool-fan disc |
| RRT026593-1 | Spanner torque tightening |
| RRT026682-1 | Lift tool |
| RRT026700-1 | Extractor |
| RRT026704-1 | Stand bld |
| RRT026705-1 | Bolt |
| RRT026834-10 | Special washer |
| RRT026834-12 | Pivot pin |
| RRT026834-14 | Shoulder pin |
| RRT026834-15 | Shoulder pin |
| RRT026834-19 | Shoulder pin |
| RRT026834-20 | Shoulder pin |
| RRT026834-21 | Shoulder pin |
| RRT026834-22 | Shoulder pin |
| RRT026834-23 | Stop block |
| RRT026834-26 | Packer |
| RRT026834-27 | Shoulder pin |
| RRT026834-28 | Shoulder pin |
| RRT026834-4 | Pivot pin |
| RRT026834-7 | Shoulder pin |
| RRT026834-9 | Special washer |
| RRT026850-1 | Lifter |
| RRT027013-1 | Blading ring |
| RRT027053-1 | Lif tool |
| RRT027054-1 | Adaptor |
| RRT027150-1 | Extractor,hydraulic |
| RRT027169-1 | lift tool |
| RRT027239-1 | Module 05 rear support |
| RRT027274-2 | Sling turover ip&lp turbine |
| RRT027275-1 | Trolley,use with rrt027274 |
| RRT027367-1 | Stand |
| RRT027368-1 | Support ring |
| RRT027436-1 | Guide sleeve |
| RRT027439-1 | Seal housing press |
| RRT027456-1 | Trolley,sling fancase |
| RRT027554-2 | Immobiliser |
| RRT027554-2-5 | Location bung |
| RRT027643-1 | Plate |
| RRT027680-2 | Immobiliser assembly |
| RRT027766-2 | Lifting tool |
| RRT027780-2 | Alin tool |
| RRT028030-2 | Assembly-reaction plate |
| RRT028077-1 | Front support |
| RRT028107-1 | Clamp ring |
| RRT028138-1 | Alin pin |
| RRT028207-1 | Vfsg dummy unit |
| RRT028285-2 | Common base |
| RRT028285-2_lss_L_Det47 | Load plate |
| RRT028285-3 | Common base |
| RRT028400-3 | Fuel pump accessory |
| RRT028470-1 | Clamp ring |
| RRT028473-3 | Dummy case |
| RRT028936-2 | Location adapter |
| RRT029216-2 | Build/turnover stand |
| RRT029277-2 | Alignment tool |
| RRT029509-1 | Lift tool |
| RRT029541-1 | Inx plt |
| RRT029542-1 | spanner |
| RRT029545-1 | Lifter |
| RRT029656-1 | IPT Measurement beam |
| RRT029748-1 | Spanner |
| RRT029749-1 | Anchor plate |
| RRT030496-1 | Trolley engine sling |
| RRT030714-2 | Drop check inspection beam |
| RRT031300-1 | Tru pull open straps |
| RRT032368-1 | Fuel pump cradle |
| RRT032921-1 | Lifter/Extractor |
| RRT033545-1 | Assembly tool |
| RRT033736 | Extraction tool |
| RRT033738 | Extraction tool |
| RRT034447-1 | Lower frame |
| RRT039899-1 | Assy tool |
| RRT041295-1 | Lifter immobiliser |
| RRT042166-1 | Beam |
| RRT042443-1 | Pin alignment |
| RRT042873-1 | Pump set |
| RRT044593-DETAILS-3-4 | Guide tube |
| RRT045040-D | Lifter |
| RRT045040-DETAIL-9-D | Plate |
| RRT046913-1 | LIFTER |
| RRT046922-1 | Immobiliser |
| RRT046943-1 | Spanner |
| RRT046969-1 | Support |
| RRT048352-1 | Lift tool |
| RRT050033-2 | Pmi mandrel |
| RRT050046-1 | Press sleeve |
| RRT050088-1 | Lifter |
| RRT050089-1 | Housing |
| RRT050217-1 | Sup rings |
| RRT050229-2 | Container |
| RRT050231-1 | Lift tool |
| RRT050248-2 | Tool,Lift |
| RRT050249-3 | Stand，transportation |
| RRT050254-1 | Fixture，holding |
| RRT050255-1 | Setting tool |
| RRT050256-1 | Stand,transportation 05 module |
| RRT050378-1 | Extractor |
| RRT050386-1 | lift tool |
| RRT050389-1 | Turnover adaptor |
| RRT050409-1 | Lift tool |
| RRT050412-1 | Bearing housing |
| RRT050427-1 | Spring clip stg 1 |
| RRT050428-1 | Bearing housing |
| RRT050438-1 | Spring clip stg 2 |
| RRT050445-1 | Assembly tool |
| RRT050462-2 | Ring blading |
| RRT050465-1 | Fixture,support |
| RRT050478-2 | Lift Tool |
| RRT050499-1 | Set plate |
| RRT050506-2 | VFG fixture |
| RRT050528-1 | Dummy unit vfg |
| RRT050574-1 | Sling-FWD nozzle plug |
| RRT050637-2 | Sling |
| RRT050669-4 | Rear nozzle plug trolley crade and sling |
| RRT050687-1 | Immobiliser |
| RRT050687-2 | Immobiliser |
| RRT050701-1 | base support |
| RRT050756-1 | Lifting tool |
| RRT050758-1 | lifter |
| RRT050775-3 | lifting tool |
| RRT050776-1 | Adaptor plate |
| RRT050792-1 | Turnover adaptor |
| RRT050807-1 | Location Pin |
| RRT050887-1 | Shroud clamp adaptor |
| RRT050907-1 | Liift&turnover bracket |
| RRT050908-1 | Liift&turnover bracket |
| RRT050913-1 | Alignment tool kit |
| RRT050940-1 | Turnover adaptor |
| RRT050960-3 | Lifter mmobiliser |
| RRT050989-3 | LocKing tool |
| RRT050990-1 | Special socket |
| RRT051003-1 | Clocking paddle，kunckle & arm kit |
| RRT051018-1 | Turnover adaptor |
| RRT051031-1 | Extractor |
| RRT051085-1 | Lift tool |
| RRT051086-1 | Adaptor |
| RRT051087-1 | Lift tool |
| RRT051104-2 | Nut ring |
| RRT051131-1 | Extractor |
| RRT051144-1 | Location ring |
| RRT051149-1 | Lift tool |
| RRT051156-1 | Support tool |
| RRT051168-1 | Lift tool (hp turbine assy) |
| RRT051181-1 | Stand adaptor build plate |
| RRT051190-1 | Dummy seal plate |
| RRT051195-1 | Filing fixture |
| RRT051204-1 | Clamp ring |
| RRT051217-1 | Clamp ring |
| RRT051222-2 | Lift tool(circ) |
| RRT051243-1 | Lift tool/immobiliser |
| RRT051340-1 | Lift tool-dummy shaft |
| RRT051342-1 | Top Adaptor |
| RRT051455-1 | Pilot bar |
| RRT053193-1 | Stand |
| RRT053829-2 | Dummy securing plates |
| RRT053833-1 | Alignment tool |
| RRT053983-2 | Engine Build Stand |
| RRT054022-1 | Lift adaptor |
| RRT054023-2 | Guide tool |
| RRT054171-1 | Support pillar |
| RRT054171-2 | Setting/extraction fixture |
| RRT054223-1 | Sup ring |
| RRT054282-1 | Immobiliser |
| RRT054318-4 | Stand Bld |
| RRT054699-2 | lift tool |
| RRT054701-1 | Spanner |
| RRT054707-3 | Clamp |
| RRT054708-2 | Extractor |
| RRT054710-1 | Support ring |
| RRT054716-1 | Guide tool |
| RRT054718-2 | Support tool |
| RRT054723-1 | Sup tool |
| RRT054727-1 | Setting tool |
| RRT054728-1 | Support tool |
| RRT054729-2 | Support shaft |
| RRT054888-2 | Hydraulic Tool/Immobiliser |
| RRT054899-1 | peening tool |
| RRT054912-1 | Parking trolley |
| RRT054962-5 | Build/turnover stand |
| RRT054969-2 | Parking stand |
| RRT055473-2 | Dummy flying seal |
| RRT055969-1 | Lifter |
| RRT055986-2 | Retainer |
| RRT056168-1 | Sling |
| RRT056381-1 | Turnover adaptor |
| RRT056945-1 | Bolt holding tool |
| RRT056980-2 | Immobiliser-tri lobe BRG |
| RRT057461-1 | Adaptor fixture |
| RRT057484-1 | Bench fixture |
| RRT057624-1 | Lifter |
| RRT058055-2 | Lift tool |
| RRT058056-1 | Extractor |
| RRT058158-1 | Guide pin |
| RRT058161-4 | Lift/turnover tool |
| RRT058433-2 | Assembly fixture hp seal |
| RRT058819-1 | Filing fixture |
| RRT058882-1 | Inx plt |
| RRT059322-1 | Lift tool |
| RRT059450-1 | Fancase bracket |
| RRT059713-1 | Pliers(Retaining Ring) |
| RRT060201-2 | Stand,transit,fan assy |
| RRT060466-1 | Extractor |
| RRT060472-1 | Retg tool |
| RRT060926-1 | Location tool |
| RRT060990-1 | Ndt cleaning 02 5-8 ip comp rotor |
| RRT060991-1 | Process clean tool for the MO 4 1-3 blisk |
| RRT062237-1 | Ga taper |
| RRT062782-1 | Case turn over stand |
| RRT062793-1 | Support |
| RRT062794-1 | Immobiliser |
| RRT063161-2 | Mill cutter |
| RRT063218-4 | Build stand |
| RRT063220-2 | High safety stand (module 02/04) |
| RRT063560-2 | Support frame |
| RRT063699-1 | Torque reaction stand |
| RRT063784-2 | Lifter |
| RRT064119-1 | Universal fancase lifter trolley |
| RRT064183-2 | Adpt plt |
| RRT064273-3 | Seal tool |
| RRT064977-1 | Stub shaft repositioning tool |
| RRT065077-1 | Extractor |
| RRT066304-2 | Adaptor |
| RRT067037-1 | Extractor |
| RRT067141-1 | Assy tool-pusher |
| RRT068174-1 | Drive adpt |
| RRT068178-1 | Extension |
| RRT068381-1 | Bevel gear extractor |
| RRT068578-1 | Fancase inspection stand |
| RRT069102-1 | Support |
| RRT070168-1 | Stubshaft extractor |
| RRT070414-1 | Trolley |
| RRT072565-1 | Alignment Tool-Stage 3 |
| RRT072574-1 | Thrust link lifter |
| RRT072743-2 | Work stand |
| RRT073284-1 | Support tool |
| RRT073352-1 | Protector |
| RRT073364-1 | Index plate |
| RRT073365-1 | Torque spanner |
| RRT074291-2 | Pdos hose alignment tool |
| RRT074385-1 | Dummy unit |
| RRT074458-1 | Alignment tool |
| RRT075094-1 | Peen tool |
| RRT075639-1 | Assembly tool |
| RRT077048-2 | Retaining bolt tool |
| RRT077049-1 | Retaining bands |
| RRT077476-1 | Build fixture |
| RRT077773-1 | Index plate |
| RRT077803-1 | Guide Sleeve |
| RRT077874-3 | Extractor |
| RRT077947-1 | Sling adaptor |
| RRT078192-2 | Setting gauge |
| RRT078223-1 | Dum ring |
| RRT078384-1 | Extractor |
| RRT078689-1 | Peening tool cup washer |
| RRT079493-1 | Drift |
| RRT079762-1 | Calibration simulator hp turbine |
| RRT081375-1 | Stud |
| RRT081399-1 | Tube |
| RRT081399-2 | Disc |
| RRT081399-3 | Adapter plate |
| RRT081399-5 | Container assy |
| RRT081399-6 | Container assy |
| RRT081399-7 | Container assy |
| RRT081399-8 | Container assy |
| RRT081399-9 | Container assy |
| RRT081641-1 | Top adaptor |
| RRT081701-1 | Lift tool |
| RRT081709-2 | Transportation container |
| RRT081715-1 | Extractor |
| RRT081931-2 | Extractor |
| RRT081969-1 | Assembly fixture |
| RRT081975-1 | Lift&turnover adaptor |
| RRT082061-1 | 05 safety stand |
| RRT082062-1 | Anti-rotation immobiliser |
| RRT082289-1 | Alin tool |
| RRT082336-2 | Dummy unit bifurcation |
| RRT082382-1 | Container |
| RRT082384-1 | Immobiliser/lifter |
| RRT082385-1 | Lif tool |
| RRT082399-1 | Build plate |
| RRT082413-1 | Dummy case |
| RRT082414-1 | Lifting block |
| RRT082439-2 | Lift tool |
| RRT082447-1 | Filing fixture |
| RRT082461-1 | HP turbine coverplate extractor |
| RRT082988-2 | Trolley |
| RRT083620-1 | Stage 1 extractor |
| RRT083622-1 | Stage 2 extractor |
| RRT083711-2 | Lift tool |
| RRT083779-1 | Spanner |
| RRT084923-1 | Compression tool |
| RRT084963-1 | Clamp plt |
| RRT085111-2 | Centre hub |
| RRT086674-1 | Guide/lift tool |
| RRT086714-1 | Vigv rigging bracket |
| RRT086715-1 | VSV 1 Rigging bracket |
| RRT086716-1 | Vsv2 rigging brackets |
| RRT088179-1 | Build Stand |
| RRT089672-1 | LP Bearing lifter |
| RRT090972-1 | Lp nut ring loading tool |
| RRT091162-1 | Lift tool |
| RRT091296-1 | Extractor |
| RRT091299-1 | Vigv Rigging Bracket |
| RRT092763-1 | M/C FIX |
| RRT092766-1 | M/C FIX |
| RRT093442-1 | Curvic alignment tool |
| RRT093771-1 | Lifter |
| RRT093779-1 | Turn over adaptor |
| RRT094354-1 | lift tool |
| RRT094607-1 | intercase lifter |
| RRT094608-1 | Sliding Pad |
| RRT094859-1 | Engine Mount Turnover Frame |
| RRT095052-1 | Trolley |
| RRT095052-2 | Cradle |
| RRT095052-107 | Front trunnion short screw |
| RRT095052-108 | Front trunnion long screw |
| RRT095052-98 | Drawbar |
| RRT095052-3-19 | Rolling cradle |
| RRT095052-4-19 | Front forklifting tube |
| RRT095293-1 | A Frame assy-bushes |
| RRT095652-1 | Fixture |
| RRT097352-1 | Cric lifter |
| RRT098293-2 | Extractor |
| RRT098400-2 | Inspection fixture |
| RRT099088-1 | Extractor |
| RRT099367-2 | Extraction adaptor |
| RRT099883-1 | Lift&turnover adaptor |
| RRT100115-1 | Dummy seal plate |
| RRT100746-1 | Pump assembly |
| RRT102101-1 | Clamp ring |
| RRT102107-2 | Retaining plate kit |
| RRT102439-2 | Rivet/de rivet tool |
| RRT102677-1 | Rig kit |
| RRT102989 | Adapter,location |
| RRT103992-1 | Lift adpt |
| RRT104147-1 | Lifter,beam |
| RRT104303-1 | Clamp tool |
| RRT104309-1 | Transportation stand |
| RRT104997-2 | Front adapter |
| RRT104997-3 | Front pin |
| RRT104997-4 | Rear pin |
| RRT105044-2 | Index plate |
| RRT105052-1 | Roller bearing support tool |
| RRT105406-1 | Setting tool |
| RRT105542-1 | Alignment tool |
| RRT105890-1 | Lift tool |
| RRT106124-1 | Spanner |
| RRT106351-1 | Extractor |
| RRT106464-1 | Build stand |
| RRT106464-2 | Build stand |
| RRT106465-1 | Universal build stand |
| RRT106793-1 | Extractor |
| RRT106949-1 | Bearing Bridge |
| RRT106965-1 | T/O adpt |
| RRT107560-3 | lockplate flattening tool |
| RRT108148-1 | Park stand |
| RRT108328-1 | Trolley-core lifter |
| RRT108338-1 | Extractor |
| RRT108518-1 | Peening tool |
| RRT108912-2 | Bearing preload tool |
| RRT108913-1 | Lifter |
| RRT109062-1 | Handle |
| RRT109938-1 | Bolt Retaining Tool |
| RRT109939-1 | Hp turbine lift tool |
| RRT110437-1 | Lightweight 08 lift adapter |
| RRT110663-1 | Beam support |
| RRT110942-1 | Lifter |
| RRT110943-1 | Immobiliser |
| RRT111029-1 | TOOL kit |
| RRT111294-1 | Support plate |
| RRT111387-1 | Guide tube |
| RRT111396-1 | Fitting and extraction tool |
| RRT111397-1 | Alin tool |
| RRT111811-1 | Immobiliser |
| RRT111997-1 | Adjustment tool |
| RRT112569-3 | Peen tool |
| RRT112599-1 | Module 02 work stand |
| RRT112880-2 | Fancase trolley base |
| RRT112882-3 | Engine turnover |
| RRT112900-1 | Engine stand fastener kit |
| RRT113154-1 | Turnover adaptor |
| RRT113677-2 | Stand transport support |
| RRT113742-1 | Lifter |
| RRT113777-2 | Adaptor bridge |
| RRT113780-1 | Stub,shaft installation adaptor |
| RRT114421-1 | Clamp tool |
| RRT114454-1 | Flat pack engine stand |
| RRT114457-3 | Lift adaptor |
| RRT115172-1 | Engine build stand |
| RRT115388-1 | Front trunnions |
| RRT115576-1 | Dowel extractor |
| RRT116190-3 | Lift adaptor |
| RRT116457-1 | Turnover rear trunnions |
| RRT117467-1 | Fan Disc Parking Trolley |
| RRT117645-1 | guide shaft |
| RRT117646-1 | Lp rear stubshaft etraction and handling tool |
| RRT117652-1 | Install/extract adaptor |
| RRT117747-2 | Extract tool |
| RRT117818-1 | Immobiliser |
| RRT118258-1 | Lifter |
| RRT118401-1 | Flat pack engine stand |
| RRT118460-1 | Support prop |
| RRT118517-1 | Index tool |
| RRT118627-1 | Extension bar |
| RRT118740-1 | Asjustment Tool |
| RRT118753-1 | Rear fan case lifter |
| RRT119681-1 | Splined nut&locking ring spanner |
| RRT120736-1 | Guide tube |
| RRT120863-1 | Clamp ring |
| RRT120896-1 | Install tol |
| RRT121289-1 | Ass adpt |
| RRT121813-1 | Lifter |
| RRT122848-1 | Extractor |
| RRT125577-1 | Puller pusher |
| RRT127149-2 | Stand |
| RRT127954 | Multi Product Flat Pack Engine Stand |
| RRT127961 | Trunnion |
| RRT128541-1 | TL swage |
| RRT128551 | Extr tool |
| RRT128878 | Fix Calibration |
| RRT129033 | Adaptor |
| RRT129158 | Spacer |
| RRT129159 | Alin tool |
| RRT129160 | Guide pin |
| RRT129311 | Support frame |
| RRT129312 | Trunnion |
| RRT129313 | Trunnion |
| RRT129524 | Drift |
| RRT129590 | Gauge |
| RRT129616 | Beam |
| RRT129617 | Beam |
| RRT129618 | Frame |
| RRT129619 | Adaptor |
| RRT129620 | Adaptor |
| RRT129667 | Lif tool |
| RRT129957 | Adaptor |
| RRT129958 | Adaptor |
| RRT129959 | Frame |
| RRT130170 | Adaptor Ring |
| RRT130171 | Adaptor Ring |
| RRT130723 | Stand |
| RRT131207 | Sling |
| RSE1071-1 | Wrench-union |
| RSE1113-17 | Strap assy |
| RSE1130-1 | Fixture exhaust nozzle |
| RSE7301-501 | lifting assemblies |
| RSE7301-509 | Strap assy |
| RSE7301-510 | Strap assy |
| RSE7301-517 | Strap assy |
| S3S20882000 | Stand assy storage |
| S3S20929000 | Sling assy lifting |
| S3S23038000 | Trolley,set engine installation |
| S3S23038089 | Link,assy |
| S3S23211000 | Stand,assy transportation |
| S3S25097037 | Trunnion assy |
| S700H0981-17 | Nameplate |
| SAMC-G-C919-0252 | Special pushing iron |
| SAMC-G-C919-0268 | Special top iron for electrical tower support |
| SAMC-G-C919-0332 | Special top iron for threshold beam |
| SAMC-G-C919-0351 | Handle-equipped insert nut fixing clip |
| SAMC-G-C919-0425 | Special C jaw lock |
| SAMC-G-C919-0571 | Rear pivot pin nut clamping sleeve of the main landing gear |
| SAMC-G-C919-0582 | Main landing gear axle large nut socket |
| SAMC-G-C919-0601 | Clamping tool for the central water-removing ejector pump of the fuel system |
| SAMC-G-C919-0691 | Long-handled side-tightening wrench |
| SAMC-G-C919-0691-001 | Wrench |
| SAMC-G-C919-0691-002 | Extension rod |
| SAMC-G-C919-0781 | Cylindrical vertical guide sleeve |
| SAMC-G-C919-0981 | Trent control surface bolt clamping tool |
| SAMC-G-C919-1021 | Aileron REU force-setting extension rod |
| SAMC-G-C919-1022 | Aileron REU disassembly and assembly extension rod |
| SAMC-G-C919-1061 | Auxiliary hole-making tool for connecting angle strap on the wing |
| SAMC-G-C919-1091 | twoTop iron |
| SAMC-G-C919-1092 | 25 long partition top iron |
| SAMC-G-C919-1111 | Three.Jacking iron |
| SAMC-G-C919-1252 | Trent bolt clamping device |
| SAMC-G-C919-1307 | C-shaped lock buckle |
| SAMC-G-C919-1311 | Universal sleeve for the eccentric bushing of slat pulleys |
| SAMC-G-C919-1365 | Ferrous metal scraper |
| SAMC-G-C919-1411 | Tool for disassembling and assembling the large nut of the nose wheel axle |
| SAMC-G-C919-1515 | C919 nose landing gear dummy part axle pin removal tool |
| SAMC-G-C919-1517 | Flaps 2 - 4Bolt fixing sleeve for pulley assembly |
| SAMC-G-C919-1518 | Type C adapter 1 |
| SAMC-G-C919-1519 | Type C Adapter 2 |
| SAMC-G-C919-1521 | 2 - 4Pulley frame eccentric adjustment tool |
| SAMC-G-C919-1522 | Special nut installation sleeve at the slide rail of Flap No. 1 |
| SAMC-G-C919-1523 | Slat C-clip tool |
| SAMC-G-C919-1524 | C919 main landing gear side strut nut sleeve |
| SAMC-G-C919-1525 | C919 front dummy part axle nut socket |
| SAMC-G-C919-1526 | Tool for the boss of the 45° elbow joint passing through the bulkhead |
| SAMC-G-C919-1527 | Disassembly tool for the front pivot pin of the real main landing gear of C919 |
| SAMC-G-C919-1530 | Top iron |
| SAMC-G-C919-1531 | 20° elbow buckle |
| SAMC-G-C919-1532 | Jacking iron |
| SAMC-G-C919-1533 | Fixing clip for nut with no handle insert |
| SAMC-G-C919-1534 | Torque wrench 1 |
| SAMC-G-C919-1535 | Elbow buckle |
| SAMC-G-C919-1536 | Jacking iron |
| SAMC-G-C919-1537 | Top iron |
| SAMC-G-C919-1538 | Open-end double offset ring spanner |
| SAMC-G-C919-1539 | Top iron |
| SAMC-G-C919-1540 | Top iron |
| SAMC-G-C919-1541 | C-shaped flat wrench |
| SAMC-G-C919-1542 | Opposite bolt tightening tool |
| SAMC-G-C919-1543 | Punching tool for fasteners of horizontal measuring points |
| SAMC-G-C919-1544 | Top iron |
| SAMC-G-C919-1545 | Top iron |
| SAMC-G-C919-1546 | Top iron |
| SAMC-G-C919-1547 | Open-end double offset ring spanner |
| SAMC-G-C919-1548 | Top iron |
| SAMC-G-C919-1549 | Top iron |
| SAMC-G-C919-1550 | Lining iron |
| SAMC-G-C919-1551 | Lining iron |
| SAMC-G-C919-1552 | Reaction wrench 2 |
| SAMC-G-C919-1553 | Adapter |
| SAMC-G-C919-1554 | Reaction wrench 2 |
| SAMC-G-C919-1556 | Reaction wrench 4 |
| SAMC-G-C919-1557 | Reaction wrench 3 |
| SAMC-G-C919-1558 | Reaction wrench 1 |
| SAMC-G-C919-1559 | Open-end wrench head |
| SAMC-G-C919-1560 | Open-end wrench head |
| SAMC-G-C919-1561 | Open-end wrench |
| SAMC-G-C-C919-1063 | Longitudinal beam auxiliary tool |
| S-C630JT154 | C919 aircraft RAT ground drive test - Protection device |
| SE14116 | Cradle assy-trent 900 transport stand |
| SE1511 | Positioning tool |
| SF.35.9360 | Crimp sleeve |
| SF.354.060 | Rope |
| SF.51.10.06 | Thimbles |
| SL90-309-11250 | Wrench assy |
| SL90-313-10000 | Wrench assy |
| SL90-313-11250 | Wrench assy |
| SL90-313-12500 | Wrench assy |
| SL90-313-13750 | Wrench assy |
| SL90-313-15000 | Wrench assy |
| SL90-313-15625 | Wrench assy |
| SL90-314-10000 | Wrench assy |
| SL90-314-11250 | Wrench assy |
| SL90-314-12500 | Wrench assy |
| SL90-314-13750 | Wrench assy |
| SL90-314-15000 | Wrench assy |
| SL90-314-15626 | Wrench assy |
| SL90-315-10000 | Wrench assy |
| SL90-315-11250 | Wrench assy |
| SL90-315-12500 | Wrench assy |
| SL90-315-13750 | Wrench assy |
| SL90-315-15000 | Wrench assy |
| SL90-315-15625 | Wrench assy |
| SL90-374-11250 | Wrench assy |
| SL90-374-12000 | Wrench assy |
| SL90-374-15625 | Wrench assy |
| SL90-630-3125 | Wrench assy |
| SL90-631-3125 | Wrench assy |
| SMH1771 | Stand |
| S-O-M-AC-0611-SD | Axle jack pad block |
| S-O-M-AC-0646-SD | FWD jack adapter |
| S-O-M-AC-0667-SD | Wedge Block |
| S-O-M-AC-0737-SD | Brake hub bushing |
| S-O-M-AC-0795-SD | Sling |
| S-O-M-AC-0808-SD | Lwr cardan skt |
| S-O-M-AC-0809-SD | Upper cardan skt |
| S-O-M-AC-0898 | Exhaust plug |
| S-O-M-AC-0906 | Exhaust plug |
| S-O-M-AC-1046 | Brake bleed-off connector |
| S-O-M-AC-1061-SD | Top rod bolt |
| S-O-M-AV-0877 | Plastic cap |
| S-O-M-SM-1166-SD | Threaded sleeve installation tool |
| SP1002 Sht 1-P01 | Locating Pin |
| SP1005 Sht 2-P02 | Hinge Block Base |
| SP1005 Sht 3-P03 | Hinge Block Top |
| SP1005 Sht 4-P04 | Hinge Block |
| SP1005 Sht 4-P05 | Hinge Pin |
| SP1005-02-P02 | Hinge Block Assy - Bottom |
| SP1005-03-P03 | Hinge Block Assy - Top |
| SP1005-04-P04 | Hinge Block |
| SP1005-04-P05 | Hinge Pin |
| SP1006 Sht 2-P02 | Clamp Support Tube |
| SP1006 Sht 2-P03 | Locating Mounting Pin |
| SP1007-P01 | Pip Pin |
| SP1007-P02 | Pip Pin |
| SP1007-P03 | Pip Pin |
| SP1007-P04 | Pip Pin |
| SP11 6200 | Support legs |
| SPM040024ASF02 | Spring pin |
| ST00225821 | Cranked nozzle 1/4 att rect 9×12 |
| STARCO-A330-26-00733 | Protective cap |
| STARCO-A330-72-01533 | UP12048 adaptor |
| STARCO-A330-72-01535 | UP11506 nut adaptor |
| STARCO-B747-73-01387 | Adaptor for 747 CF6 HMU bolt |
| STD-93-00-001 | Doser trolley |
| T000645452-00308W01 | P8 tooling hole pin |
| T10268-001 | Actuator test adaptor |
| T2457-004 | Spindle |
| T300-112A | Fitting assy |
| T300-120A | Fitting assy |
| T32830 | Seal insertion tool |
| T35608 | Standard Holder |
| T35634 | Bushing + Pin |
| T35744 | Standard Holder Stop plates |
| T430962 | Check ring |
| T438359 | Puller，sleeve |
| T-445076-1 | Socket |
| T449469 | Test plate |
| T-450525 | Puller gear |
| T-454321 | Bullet and form tool |
| T457461 | Seal compression tool |
| T457478 | Seal compression tool |
| T458161 | Mounting bracket |
| T-462614 | Torque adapter |
| T-474197 | Mating ring installation tool |
| T474512 | T-handle removal tool |
| T474677 | Pump lapping fixture for cylinder block/valve plate |
| T474678 | Generic lapping fixture |
| T474680 | MPEV3-056 lapping fixture |
| T-475136 | Puller |
| TC-DQP | Trailer - Nitrogen cylinder |
| TER102313 | Tool-bucking bar |
| TER102712 | Fixture - 98d57304002 sharklet load test |
| TER103556 | Modification-inlet cowl sling |
| TER88850-501 | Modified 2 inch crowfoot wrench |
| TES3776 | Adapter motor testing |
| TFRL002343 | Inner piston clamp |
| TFRL002346 | Piston tetainer assy tool |
| TLW101-A/D/F/L/H/N | Indicator component |
| TLW101-H | Spring |
| TMH DI16-11-00 | Adaptor |
| TMSD0028 | Spanner，locking ring 4' |
| TMSD0029 | Spanner，hose drum locking ring |
| TRSV01F78AH50-00000-00 | Hold open rod RHS |
| TS(D)-06-001-7B | supporting leg |
| TS(D)-06-001-8B | supporting leg |
| TSFFT1U2800-14 | Test support fixture 747-8 jettison tube hose adapter assy |
| TYPE 81 | External circlip |
| 11C3406G03 | Fixture,runout measurement-fan case |
| 7C2087G01 | Fixture Install- Stg 1 Hanger/Support Hpt Stator Case |
| 7C2087G02 | Fixture Install- Stg 1 Hanger/Support Hpt Stator Case |
| 7C2087G03 | Fixture Install- Stg 1 Hanger/Support Hpt Stator Case |
| 9471M28G02 | Kit, Calibration Protractor, Electronic Portable -Vsv |
| 956A1287 | Fixture,buildup-lift&install stg 2 hpt nozzle assy |
| 956A1803G03 | Fixture remove-cisk hpt rotor stg 2 |
| 956A1803G04 | Fixture remove-cisk hpt rotor stg 2 |
| 956A7625G03 | Fixture install front centering install lpt |
| 9C1721G01 | Ficture,lift&turn-lp turbinr disks |
| 9C2246G03 | Handling Plate Hpc Rotor Rotor Spool 7/9-Cdp Seal And Spool 2/5-Blisk-Cone Shaft |
| 9C2246G04 | Handling Plate Hpc Rotor Rotor Spool 7/9-Cdp Seal And Spool 2/5-Blisk-Cone Shaft |
| 9C3124G02 | Fixture inspection stg 6 lpt blades |
| 956A3227G03 | Tool set,install/remove-air duct,hp turbine |
| RRT050248-1 | Tool,Lift |
| 11C3119G01 | Fixture handling forward fan shaft |
| 856A3750G03 | Fixture，centering lpt shaft mddule |
| 8C2178G01 | Fixture support-aft hpcs extension case |
| 8C2178G02 | Fixture support-aft hpcs extension case |
| 8C2733G01 | Fixture,grind-stages 1&2 hpt shrouds |
| 8C2733G02 | Fixture,grind-stages 1&2 hpt shrouds |
| 8C2733G03 | Fixture,grind-stages 1&2 hpt shrouds |
| 956A3549G03 | Fixture，inspect-shimming，IGB |
| 98F27407507002 | Rails set remov./install,thsa schienensystem ausbau/einbau thsa |
| 9C1140G02 | Pedestal,support-tcf gnd handling |
| 9C1140G03 | Pedestal,support-tcf gnd handling |
| 9C1140G04 | Pedestal,support-tcf gnd handling |
| 9C3402G01 | Bar lift&turn hp compressor |
| E1.C1A.350.700 | TOOL |
| E1.C2X.350.077 | Assembly tooling, core machine assembly column |
| RRT054831-3 | Stand bld |
| RRT054831-4 | Stand bld |
| RRT062266-2 | Sling |
| RRT062266-3 | Sling |
| RRT062266-4 | Sling |
| RRT062266-5 | Sling |
| RRT081756-1 | Ring |
| RRT102439-1 | Rivet de rivet tool |
| RRT112569-2 | Peen tool |
| 98F54003008001 | Adaptor dynamometer R1 ndt |
| 98F54003008002 | Adaptor dynamometer R1 ndt |
| 98F5400300800 | Adaptor dynamometer R1 ndt |
| E1.C1A.380.084-A | Transportation equipment: C1A-101, 102, 103 complete machine transport vehicles |
| HU43262-E | Torque multiplier |
| HU11934 | Universal slinging adaptor |
| RRT050775-2 | lifting tool |
| UT1311-2 | Ramloading tool |
| UT1311-3 | TOOL |
| UT448-2 | Spanne-ps limiter rdjusting |
| UT501 | Key spanner |
| UT631-1 | C type torque spanner(3/8 sq drive) |
| UT632-1 | C type torque spanner(3/8 sq drive) |
| UT739 | Spanner adjusting |
| UT857 | Fitters |
| UT893 | Wrench |
| VT962233-1005 | Web support frame D2 |
| VT962233-1015 | Web support frame E1 |
| VT962233-1025 | Web datum locator pin |
| VT962233-1060 | Root end support pad 1 |
| VT962233-1070 | Root end support pad 2 |
| VT962233-1080 | Root end support pad A1 |
| VT962233-1090 | Root end support pad A2 |
| VT962233-1100 | Root end support pad B1 |
| VT962233-1110 | Root end support pad B2 |
| VT962233-1120 | Root end support pad B3 |
| VT962233-1130 | Root end support pad C1 |
| VT962233-1140 | Root end support pad C2 |
| VT962233-1150 | Root end support pad C3-1 |
| VT962233-1160 | Root end support pad C3-2 |
| VT962233-1170 | Root end support pad D1 |
| VT962233-1180 | Root end support pad D2 |
| VT962233-1190 | Root end support pad D3-1 |
| VT962233-1200 | Root end support pad D3-2 |
| VT962233-1210 | Root end support pad E1 |
| VT962233-1220 | Root end support pad E2 |
| VT962233-1230 | Root end support pad E3 |
| VT962233-1240 | Root end support pad 1F fab |
| VT962233-1250 | Root end support pad F2 |
| VT962233-1270 | Web location arm A1-1 |
| VT962233-1310 | Web location arm B1-1 |
| VT962233-1340 | Web support frame B |
| VT962233-1350 | Web location arm C1 |
| VT962233-1360 | Web support frame C1 |
| VT962233-1365 | Web support frame C2 |
| VT962233-1390 | Web location arm C3-2 |
| VT962233-1400 | Web location arm D1 |
| VT962233-1410 | Web location arm D1-2 |
| VT962233-1420 | Web location arm D2-1 |
| VT962233-1430 | Web location arm D3-1 |
| VT962233-1440 | Web location arm D3-2 |
| VT962233-1450 | Web location arm E1-1 |
| VT962233-1460 | Web location arm E1-2 |
| VT962233-1470 | Web location arm E2-2 |
| VT962233-1480 | Web location arm E3-1 |
| VT962233-1490 | Web support frame D1 |
| VT962233-1495 | Web location arm F1-1 |
| VT962233-1500 | Web location arm F1-2 |
| VT962233-1510 | Web location arm F2-1 |
| VT962233-1520 | Web location arm F3-1 |
| VT962233-1530 | Web 3 datum locator |
| VT962233-1540 | Web 2 datum locator |
| VT962233-1550 | Web 3 datum locator |
| VT962233-1555 | Web support frame F1 |
| VT962233-1980 | Web location bracket |
| VT962233-2505 | Assy-frame A-master inter fab |
| VT962233-2510 | Assy-frame A-support inter fab |
| VT962233-2520 | Assy-frame B-master inter fab |
| VT962233-2525 | Assy-frame B-support inter fab |
| VT962233-2535 | Assy-frame C master inter FAB |
| VT962233-2540 | Assy-frame C support inter FAB |
| W0-20220114 | Hub half-wheel grinding workbench |
| WesconEL 596 | Push-pull control tool |
| XPWA106181 | Puller extractor |
| XPWA106181-P01 | Puller extractor |
| XPWA107964 | Adapter Aircheck Lpt #5 Bearing |
| XPWA111104 | Adapter,installation-jpc,tie shaft,piston ring |
| XPWA111178 | Stand,support-hpt,1 st stg rotor |
| XPWA111240 | Fixture,lift-diff,inr case assy,aft flg |
| XPWA111261 | Adapter,tcrogf-#2 bearing outer rage,nut |
| XPWA111392 | Stand,build inpt shaft |
| XPWA111395 | Pusher,hydraulic-fic,#2 brg,i/c rem |
| XPWA111449 | Fixture,storage-fdgs module,cts |
| XPWA111458 | Stand,support-hpc rotor,vertical |
| XPWA111614 | Pin rigging-engine assy，hpc inlet，igv，1 ST，2 ND，& 3 RD stg vanes |
| XPWA111624 | Puller,jackscrew-hpc,casing treatment ring disassembly |
| XPWA111648 | Support,fixture-engine assy,cic thrust clevis |
| XPWA111678 | Adapter,handling-hpt,case assembly |
| XPWA111682 | Fixture,lifting-hpt,rotor 2, |
| XPWA111720 | Fixture,install-hpt,rotor 1, heatshield |
| XPWA111721 | Adapter,removal-hpt,rotor 1,heatshield |
| XPWA111727 | Gage,go-no go-hpt,rotor 2,aft mini disk |
| XPWA111800 | Adapter,lift-lpc,balance arbor fwd |
| XPWA112147 | Fixture，support-engine assy，'H' flange adapters |
| XPWA211046 | Drift assembly |
| XPWA211061 | Special wrench |
| XPWA211110 | Fixture oil flow test main gearbox |
| XPWA211120 | Half-Ring,extracter |
| XPWA211121 | Half-Ring,extracter |
| XPWA211122 | Half-Ring,extracter |
| XPWA211123 | Half-Ring,extracter |
| XPWA211137 | Seal extractor |
| XPWA211149 | Half-Ring,extracter |
| XPWA211150 | Half-Ring,extracter |
| XPWA211151 | Half-Ring,extracter |
| XPWA211153 | Half-Ring,extracter |
| XPWA211154 | Pusher,disassembly |
| XPWA211155 | Pusher,disassembly |
| XPWA211156 | Pusher,disassembly |
| XPWA211159 | Nozzle,extracter |
| XPWA211173 | Pusher,disassembly |
| XPWA211174 | Pusher,disassembly |
| XPWA211176 | Half-Ring,extracter |
| XPWA211182 | Air test,Fixture, |
| XPWA211183 | Air teast fixture |
| XPWA211184 | Air test,fixture |
| XPWA211185 | Air test fixture |
| XPWA211186 | Estractor |
| XPWA211188 | Extractor |
| XPWA211189 | Dummy ols |
| XPWA211192 | Blanking,oil tank assy |
| XPWA211193 | Blanking,oil tank assy |
| XPWA211194 | Blanking,oil tank assy |
| XPWA211195 | Blanking,oil tank assy |
| XPWA211293 | Guide, adapter-hpc,balance arbor |
| XPWA211341 | Adapter,holding-lpc.#2 bearing outer race nut |
| XPWA211343 | Fixture,build-hpc module,rear hub |
| XPWA211363 | Puller,mechanical-#3 brg brush seal frt cover |
| XPWA211505 | Cover,protective-ciC180:E186c,hpc case treatment ring |
| XPWA211625 | Adapter,holding-eng assy,#6 brg washer |
| XPWA211728 | Adapter,pusher-hpc,2 nd stage rotor |
| XPWA211729 | Adapter,pusher-hpc,4 th stage rotor |
| XPWA211730 | Adapter,pusher-hpc,6 th stg rtr |
| XPWA211732 | Fixture,aligning-engine assy,hpt stack line transfer |
| XPWA211737 | Fixture,lift-hpt,curvic inspection |
| XPWA211738 | Fixture,loading-hpt,curvic inspection |
| XPWA211748 | Gage indicator engine assy hpt tie shaft |
| XPWA211800 | Sleeve,guide-#1 bearing outer race,seal rings |
| XPWA211817 | Vessel,desiccant-fdgs,preservation |
| XPWA211842 | Adapter,pusher-hpc,8 th stage rotor |
| XPWA211844 | Stand,heating-hpc rotor,rotors |
| XPWA211845 | Adapter,aligning-hpc rear hub |
| XPWA211846 | Adapter,aligning-hpc build fixture to precitech |
| XPWA212139 | Puller,mechanical-cic,#3 brg rear seal plate |
| XPWA212313 | Adapter,torque-cic,gearbox drive,retaining nut |
| XPWA86713 | Protector，cover-engine assy，LPC fan hub |
| XPWA86714 | Wedge，mechanical-engine assy，LPC fan blade lock |
| XUT38629-1 | Lift hp module verticauy with turbine removed |
| ZB-0061R07840 | TOOL |
| ZB-20220CL | TOOL |
| ZB-45-0351-01 | TOOL |
| ZB-727-1213-01 | Wrench |
| ZB-FCM9130-01 | Support |
| ZB-FCM9130-02 | Gate seal leak test adaptor |
| ZB-HY441-LT | TOOL |
| ZB-PRESS FIXTURE | TOOL |
| ZB-RNX-E | Storage box assy |
| ZB-RNX-PWP1831 | Storage box assy |
| ZB-RNX-PWP3555 | Storage box assy |
| ZB-RNX-PWP716 | Storage box assy |
| ZB-T-8700 | TOOL |
| ZB-VFT210B00-01 | TOOL |
| ZCKJ1H29C+2CKE65C | Limit Switches |
| ZKD-172050 | TOOL |
| ZN004-90900-01/-20 | TOOL |
| ZN004-90900-01/-5 | TOOL |
| ZN004-90900-01/-6 | TOOL |
| ZN004-90901-01/-16 | TOOL |
| ZN004-90901-01/-3 | TOOL |
| ZN004-90901-01/-9 | TOOL |
| ZTQLD-T | TOOL |
| ZTZ/KTQLD-T | TOOL |
| ZZ-HYHYLBGZ | TOOL |
| ZZTT-ADMWG | TOOL |
Contact Us
Tel:+86-18221227579
E-mail:terryluo@jxavtech.com
Conntact: Terry+86-19979533636
Add:Room 515,Building D,No 399 Jianyun Road,Pudong New District,Shanghai,China.
Copyright (©) 2022 Shanghai Junxun Aviation Technology Co.,Ltd.
